Floor

Profile on cab bulkhead for VW Combi Split from 08/1955 to 07/1967 :

Left half front floor for Volkswagen Corrado from 1989 to 1995.

Sheet thickness: 1.7mm

Engine compartment bulkhead for VW Combi Split from 08/1963 to 07/1967.

Ce socle de frein à main sur traverse pour Renault 4 (10/1961-12/1993) est compatible avec tous les modèles de 4L.
Ce support de frein à main pour R4 est en tôle électrozinguée, cette reproduction de qualité fabriquée en Europe offre une protection à la corrosion supérieure à la tôle d'origine.

Ce plancher latéral gauche pour Renault 4 (10/1961-01/1994) est d'excellente qualité.Ce plancher gauche pour R4 est en tôle électrozinguée, cette reproduction de qualité fabriquée en Europe offre une protection à la corrosion supérieure à la tôle d'origine.

This rear floor for Renault 4 (10/1961-01/1994) - interior lining is of excellent quality.

This rear floor for R4 is made of electro-galvanized sheet metal, a quality reproduction manufactured in Europe that offers superior corrosion protection to the original sheet metal.

Ce dessous de plancher avant gauche pour Renault 4 (10/1961-12/1993) est d'excellente qualité.

Cette tôle de réparation de plancher avant gauche pour R4 est en tôle électrozinguée, cette reproduction de qualité fabriquée en Europe offre une protection à la corrosion supérieure à la tôle d'origine.

This chassis repair trim for Renault 4L (10/1961-01/1994) is high quality.

This chassis repair panel for Renault 4L is compatible with all models. Made of 0.8mm thick electro-galvanised steel sheet metal, it is higher quality than the original panel.

This shaped trim gives you a durable repair without having to replace the whole chassis, if the corrosion is not too extensive.

DANSK Front boot floor hatch for Porsche 911 and 912 until 1968 :

-> Porsche 912 :
- 912 1.6 from 1966 to 1968

-> Porsche 911 :
- 911 2.0 from 1965 to 1967
- 911 2.0 from 1965 to 1967
- 911 2.0 T from 1968
- 911 2.0 L from 1968
- 911 2.0 S from 1967 to 1968

This cover with stamped shapes is long and difficult to recreate. Sometimes absent from the car, it is often corroded because it is exposed to humidity.

From DANSK brand, this quality piece will save precious time during your restoration. It also ensures an impeccable finish to the floor of the front trunk.

DANSK metal floor plate for rear seats. This vertical sheet, perpendicular to the floor, passes over the tunnel at the level of the rear pan seats. It is suitable for all Porsche 912, 912 and 930 :

-> Porsche 912 :
- 912 1.6 from 1966 to 1969
- 912 E 2.0 of 1976

-> Porsche 911 :
- 911 2.0 from 1965 to 1967
- 911 2.0 T / L / E / S from 1967 to 1969 - short and long chassis
- 911 2.2 T / E / S from 1970 to 1971
- 911 2.4 T / E / S from 1972 to 1973
- 911 2.7 Carrera RS of 1973
- 911 2.7 from 1974 to 1977
- 911 2.7 S from 1974 to 1977
- 911 Carrera 2.7 from 1974 to 1976
- 911 Carrera 3.0 from 1976 to 1977
- 911 3.0 SC from 1978 to 1983
- 911 Carrera 3.2 from 1984 to 1989

-> Porsche 930 :
- 911 3.0 Turbo from 1975 to 1977
- 911 3.3 Turbo from 1978 to 1989

DANSK Rear right seat pan for Porsche 911 and 912 from 1965 to 1972 :

-> Porsche 912 :
- 912 1.6 from 1966 to 1969
- 912 E 2.0 from 1976

-> Porsche 911 :
- 911 2.0 from 1965 to 1967
- 911 2.0 T / L / E / S from 1967 to 1969
- 911 2.2 T / E / S from 1970 to 1971
- 911 2.4 T / E / S from 1972 to 1973
- 911 2.7 Carrera RS of 1973

Ideal for the restoration of the backseat floor

DANSK complete set with rear parcel shelf, rear seats and vertical floor plate for Porsche 911 and 912 from 1965 to 1973 :

-> Porsche 912 :
- 912 1.6 from 1966 to 1969
- 912 E 2.0 from 1976

-> Porsche 911 :
- 911 2.0 from 1965 to 1967
- 911 2.0 T / L / E / S from 1967 to 1969
- 911 2.2 T / E / S from 1970 to 1971
- 911 2.4 T / E / S from 1972 to 1973
- 911 2.7 Carrera RS of 1973

Ideal for the restoration of the backseat floor

DANSK floorpan battery box with bumper support for Porsche 356 B T5 :

- 356 B 1600 - 60 hp (616/1) from 1960 to 1961
- 356 B 1600 S - 75 hp (616/2) from 1960 to 1961
- 356 B 1600 Super 90 - 90 hp (616/7) from 1960 to 1961

Also suitable for Carrera versions

Longitudinal inner plate on left front chassis for Brazilian VW Combi Split from 1957 to 1975.

DANSK Rear parcel shelf plate for Porsche 911 and 912 from 1969 :

-> Porsche 912 :
- 912 1.6 of 1969

-> Porsche 911 :
- 911 2.0 T / E / S of 1969
- 911 2.2 T / E / S from 1970 to 1971

DANSK Apron, right side, Porsche 911, 912 and 930 from 1969 to 1983 Coupé, Targa and Cabriolet :

-> Porsche 912 :
- 912 1.6 of 1969
- 912 E 2.0 of 1976

-> Porsche 911 :
- 911 2.0 T / E / S of 1969
- 911 2.2 T / E / S from 1970 to 1971
- 911 2.4 T / E / S from 1972 to 1973
- 911 2.7 Carrera RS of 1973
- 911 2.7 from 1974 to 1977
- 911 2.7 S from 1974 to 1977
-911 Carrera 2.7 from 1974 to 1976
- 911 Carrera 3.0 from 1976 to 1977
- 911 3.0 SC from 1978 to 1983

-> Porsche 930 :
- 911 3.0 Turbo from 1975 to 1977
- 911 3.3 Turbo from 1978 to 1983

Difficult to remake if it is damaged, corroded. This steel sheet, located under the dashboard, passenger side, will save valuable time during your restoration.

DANSK Front floor for Porsche 356 A, B T5, B T6 and C :

-> Porsche 356 A :
- 356 A 1300 - 44 hp (506/1) from 1956 to 1957
- 356 A 1300 S - 60 hp (589/2) from 1956 to 1957
- 356 A 1600 - 60 hp (616/1) from 1956 to 1959
- 356 A 1600 S - 75 hp (616/2) from 1956 to 1959

-> Porsche 356 B T5 :
- 356 B 1600 - 60 hp (616/1) from 1960 to 1961
- 356 B 1600 S - 75 hp (616/2) from 1960 to 1961
- 356 B 1600 Super 90 - 90 hp (616/7) from 1960 to 1961

-> Porsche 356 B T6 :
- 356 B 1600 - 60 hp (616/1) from 1962 to 1963
- 356 B 1600 S - 75 hp (616/12) from 1962 to 1963
- 356 B 1600 Super 90 - 90 hp (616/7) from 1962 to 1963

-> Porsche 356 C :
- 356 C 1600 - 75 hp (616/15) from 1964 to 1965
- 356 SC 1600 - 95 hp (616/16) from 1964 to 1965

Also suitable for Carrera versions

Without brackets

DANSK rear floor for Porsche 356 A :

- 356 A 1300 - 44 hp (506/1) from 1956 to 1957
- 356 A 1300 S - 60 hp (589/2) from 1956 to 1957
- 356 A 1600 - 60 hp (616/1) from 1956 to 1959
- 356 A 1600 S - 75 hp (616/2) from 1956 to 1959

Without brackets

DANSK rear floor for all Porsche 356 B T5, B T6 and C :

-> Porsche 356 B T5 :
- 356 B 1600 - 60 hp (616/1) from 1960 to 1961
- 356 B 1600 S - 75 hp (616/2) from 1960 to 1961
- 356 B 1600 Super 90 - 90 hp (616/7) from 1960 to 1961

-> Porsche 356 B T6 :
- 356 B 1600 - 60 hp (616/1) from 1962 to 1963
- 356 B 1600 S - 75 hp (616/12) from 1962 to 1963
- 356 B 1600 Super 90 - 90 hp (616/7) from 1962 to 1963

-> Porsche 356 C :
- 356 C 1600 - 75 hp (616/15) from 1964 to 1965
- 356 SC 1600 - 95 hp (616/16) from 1964 to 1965

Also suitable for Carrera versions

Without brackets

DANSK Outer left floor edge for Porsche 911, 912 and 930 from 1965 to 1989 :

-> Porsche 912 :
- 912 1.6 from 1966 to 1969
- 912 E 2.0 of 1976

-> Porsche 911 :
- 911 2.0 from 1965 to 1967
- 911 2.0 T / L / E / S from 1967 to 1969 - short and long Wheel base
- 911 2.2 T / E / S from 1970 to 1971
- 911 2.4 T / E / S from 1972 to 1973
- 911 2.7 Carrera RS of 1973
- 911 2.7 from 1974 to 1977
- 911 2.7 S from 1974 to 1975
- 911 Carrera 2.7 from 1974 to 1976
- 911 Carrera 3.0 from 1976 to 1977
- 911 3.0 SC from 1978 to 1983
- 911 Carrera 3.2 from 1984 to 1989

-> Porsche 930 :
- 911 3.0 Turbo from 1975 to 1977
- 911 3.3 Turbo from 1978 to 1989