Floor

Half-floor plate
inside left
Standard quality

For VW Combi Split Bus (-07/1967)

Straight inner half-floor
Top quality

Supplied in red or silver according to supplier

For VW Combi Split Bus (-07/1967)

Right-side rear half-floor

Top quality
Available in red or silver, depending on supplier

for Volkswagen Combi Split (-07/1967)

Front body floor plate for Single Cab Pick-up models. Left and right half-bottom section

For VW Combi Split Pick-up single cab (08/1952-07/1967)

DANSK lower pedal floor bracket for Porsche 911 type F, G and 912 from 1965 to 1989:

- Porsche 911 type F :

- 911 2.0 from 1965 to 1967
- 911 2.0 S from 1967
- 911 2.0 T / L / S from 1968
- 911 2.0 T / E / S from 1969
- 911 2.2 T / E / S from 1970 to 1971
- 911 2.4 T / E / S from 1972 to 1973
- 911 2.7 Carrera RS from 1973

- Porsche 911 type G :

- 911 2.7 from 1974 to 1977
- 911 S 2.7 from 1974 to 1977
- 911 Carrera 2.7 from 1974 to 1976
- 911 Carrera 3.0 from 1976 to 1977
- 911 SC 3.0 from 1978 to 1983
- 911 Carrera 3.2 from 1984 to 1989

- 911 Turbo 3.0 from 1975 to 1977
- 911 Turbo 3.3 from 1978 to 1989

- Porsche 912 :

- 912 1.6 - 90 hp (616.36) from 1966 to 1969

The tongue is sold individually , and two quantities are required per vehicle.

DANSK repair plate for Porsche 911 type G from 1974 to 1981 :

- 911 2.7 from 1974 to 1977
- 911 S 2.7 from 1974 to 1977
- 911 Carrera 2.7 from 1974 to 1976
- 911 Carrera 3.0 from 1976 to 1977
- 911 SC 3.0 from 1978 to 1981

- 911 Turbo 3.0 from 1975 to 1977
- 911 Turbo 3.3 from 1978 to 1981

Driver's side quarter floor for welding to chassis.
Standard quality, supplied without seat rail.

For VW Karmann Ghia type 14 (08/1963-07/1974)

Straight floor for Fiat 500 F, L and R (1960-1975) With reinforcement
Seat rails present.
For models listed below:- Fiat 500 F from 1965 to 1968- Fiat 500 L from 1968 to 1972- Fiat 500 R from 1972 to 1975
Italian manufacture

Made from old molds, adjustments may be necessary to fit your vehicle perfectly.

Whatever the body components, origin and quality, a "blank assembly" is essential to check and correct any adjustments before painting.

Left rear floor mat for Renault 5 (1972-1984)

For Renault 5 all models from 1972 to 1984

This high quality left rear underfloor panel replaces the lower part under the rear floor.

Complete front floor panel
For left-hand drive (LHD).

For VW Combi Split Bus (03/1955-08/1959)

This complete trunk floor for 2CV (03/1963-07/1990) is of superior quality.

This complete trunk floor sheet for 2CV is a faithful remanufacture of the original. It benefits from a slightly thicker and better quality electro-galvanized sheet metal.

Compatible models :
- 2CV AZA type AZ-A: 03/1963 to 02/1970
- 2CV AZAM type AZ-AM: 03/1963 to 09/1967
- 2CV 4 type AZ KB/A2: 02/1970 to 09/1978
- 2CV 6 type AZ KA/A2: 02/1970 to 07/1990

Original quality DANSK left floor for Porsche 911 type G and 912 from 1974 to 1989 :

- Porsche 911 type G :

- 911 2.7 from 1974 to 1977
- 911 2.7 S from 1974 to 1975
- 911 Carrera 2.7 from 1974 to 1976
- 911 Carrera 3.0 from 1976 to 1977
- 911 3.0 SC from 1978 to 1983
- 911 Carrera 3.2 from 1984 to 1989
- 930 3.0 Turbo from 1975 to 1977
- 930 3.3 Turbo from 1978 to 1989

- Porsche 912 :

- 912 E 2.0 from 1976

For left-hand drive vehicles.

Replacement pipe for the pipe running into the chassis and containing the heating valve cables. 2parts required per Kombi, sold individually.

For VW Kombi Split, 1950 ->07/1967

Replacement for the pipe holding the handbrake cables going into the chassis. 2 parts required per Kombi, sold individually.

For VW Kombi Split, 1950 ->07/1967

Replacement for the pipe holding the handbrake cables going into the chassis. 2 parts required per Kombi, sold individually.

For VW Kombi Split, 1950 ->07/1967
Left-drive only

Front seat rail support plate for 1973 Porsche 911 F type :
- 1973 911 2.4 T / E / S- 911 2.7 Carrera RS from 1973
Suitable for left or right seat.

Left floor for Fiat 500 F, L and R (1960-1975) with reinforcement
Seat rails present.
For the models listed below:- Fiat 500 F from 1965 to 1968- Fiat 500 L from 1968 to 1972- Fiat 500 R from 1972 to 1975
Italian manufacture


Made from old molds, adjustments may be necessary to fit your vehicle perfectly.

Whatever the body components, origin and quality, a "blank assembly" is essential to check and correct any adjustments before painting.

Set of 15 wooden tipper slats for VW Combi Bay Window single cab from 08/1967 to 07/1979.

DANSK Rear parcel shelf plate for Porsche 911 and 912 from 1969 :

-> Porsche 912 :
- 912 1.6 of 1969

-> Porsche 911 :
- 911 2.0 T / E / S of 1969
- 911 2.2 T / E / S from 1970 to 1971

DANSK Apron, right side, Porsche 911, 912 and 930 from 1969 to 1983 Coupé, Targa and Cabriolet :

-> Porsche 912 :
- 912 1.6 of 1969
- 912 E 2.0 of 1976

-> Porsche 911 :
- 911 2.0 T / E / S of 1969
- 911 2.2 T / E / S from 1970 to 1971
- 911 2.4 T / E / S from 1972 to 1973
- 911 2.7 Carrera RS of 1973
- 911 2.7 from 1974 to 1977
- 911 2.7 S from 1974 to 1977
-911 Carrera 2.7 from 1974 to 1976
- 911 Carrera 3.0 from 1976 to 1977
- 911 3.0 SC from 1978 to 1983

-> Porsche 930 :
- 911 3.0 Turbo from 1975 to 1977
- 911 3.3 Turbo from 1978 to 1983

Difficult to remake if it is damaged, corroded. This steel sheet, located under the dashboard, passenger side, will save valuable time during your restoration.