Exhaust silencer

JETEX Stainless Steel Exhaust Muffler for Mazda MX-5 NC

For NC all engines (2005-2008)

All stainless steel, the JETEX dual tailpipe muffler mounts in place of the stock exhaust. With excellent build quality, this muffler will release the noise from your MX-5 while maintaining a reasonable sound volume for road use.

Includes:
- Stainless steel rear muffler
- Screws
- Gasket

Exit diameter: 90 mm

DANSK Painted aluminised steel Sport exhaust silencer with twin outlets for Porsche 911 :

- 911 2.0 from 1965 to 1968
- 911 2.0 T / L / E / S from 1967 to 1969
- 911 2.2 T / E / S from 1970 to 1971
- 911 2.4 T / E / S from 1972 to 1973
- 911 2.7 Carrera RS of 1973
- 911 2.7 from 1974 to 1975
- 911 2.7 S from 1974 to 1975
- 911 Carrera 2.7 from 1974 to 1975

- Silencer with 2 inlets and 2 outlets
Outlet diameter: 60 mm

SCART Sport RIVA stainless steel silencers for Porsche 911 type 993 :

- 993 3.6 - 272 hp (M64.05/06/07/08) Carrera and Carrera 4 from 1994 to 1995
- 993 3.6 - 285 hp (M64.21/22/23/24) Carrera and Carrera 4 de 1996 to1998
- 993 3.6 - 285 hp (M64.21/22/23/24) Carrera S from 1997 to1998
- 993 3.6 - 285 hp (M64.21/22/23/24) Carrera 4S from 1996 to1998
- 993 3.8 - 300 hp (M64.20) Carrera RS from 1995 to1996

These silencers produce a raspy sound and free up the engine.

SCART exhausts are made from stainless steel and assembled by hand.

They are 100% French made.

For E46 Saloon, Touring and Coupé:
- 320d, M47 engine

For BMW E34 524TD Saloon 03/88->12/91 M21 engine without catalytic converter

Stainless steel painted DANSK Sebring type exhaust silencer with round tailpipe for Porsche 356 A, B and C from 1956 to 1965:

- 356 A from 1956 to 1959
- 356 B from 1960 to 1963
- 356 C from 1964 to 1965

Available to order.

For Golf 3:
- 1.9 Diesel 64hp (AEY)
- 1.9 TDi 90hp (1Z, AHU, ALE)

Bare final exhaust silencer
For clamp-on mounting
Original Volkswagen Classic Parts.

For VW Transporter T25 / T3
Years: 05/1979 ->06/1980
Engine 1600cc type CT until N°->073 818.
(1st assembly)

Pair of DANSK Sport rear silencer in polished 304/4301 stainless steel for Porsche 911 type 996 GT3 :

- 996 phase 1 3.6 GT3 - 360 hp (M96.76) from 2000 to 2001
- 996 phase 2 3.6 GT3 - 380 hp (M96.79) from 2004 to 2005
- 996 phase 2 3.6 GT3 RS - 380 hp (M96.79) of 2004

BOSAL exhaust silencer for Volkswagen Polo 5
For VW Polo V (6R) :- 1.2 TSI 90hp (CBZC)- 1.2 TSI 105hp (CBZB) until 05/2014
BOSAL Original Quality

Sports exhaust silencer in stainless steel
High quality from the "Vintage Speed" brand
Model with reheating. Intended for a 25 or 30 hp moulded base engine and rear skirt without notches. Straight single outlet in the original style.

For VOLKSWAGEN Combi Split Brazil (1957-1975)

SCART stainless steel Y-pipe for Porsche Boxster 987 :

- 987 2.7 Boxster phase 1 - 240 hp (M96.25) from 2005 to 2006
- 987 3.2 Boxster S phase 1 - 280 hp (M96.26) from 2005 to 2006
- 987 2.7 Boxster phase 1 - 245 hp (M97.20) from 2007 to 2008
- 987 3.4 Boxster S phase 1 - 295 hp (M97.21) from 2007 to 2008
- 987 3.4 Boxster RS 60 Spyder - 303 hp (M97.22) of 2008
- 987 2.9 Boxster phase 2 - 255 hp (MA1.20) from 2009 to 2012
- 987 3.4 Boxster S phase 2 - 310 hp (MA1.21) from 2009 to 2012
- 987 3.4 Boxster Spyder - 320 hp (MA1.21) from 2010 to 2012

The shape of this silencers connecting pipe optimises the flows of exhaust gas which flows with fewer constraints. Ideally designed for SCART Ultima Recital and with valves silencers and RS90876 exhaust outlets

Supplied with the mounting kit

Sport silencer with 2 large diameter side outlets 70 mm
2 seals (KC25508) should be ordered in addition for the outlets.
Superior quality
Tip: coat with high-temperature paint before fitting.

For Combi Bay Window,
08/1971 ->07/1979
with Type 4 engines:
1700, 1800, 2000cc

For models:
- 1.4 i 80hp
- 1.4 TSi 122hp
- 1.6 i 102hp
- 2.0 TDi 110hp / 140hp / 170hp

Supplied without end piece, to be ordered separately

This DANSK exhaust silencer in painted steel is an identical reproduction of the original silencer fitted to the first 911s produced in 1964 and, incidentally, called 901s until 1965.

It takes into account the special features that were present at the time, such as the two-layer steel architecture with heat shield, the angular cut of the tailpipe, the 57mm diameter tailpipe and its polished finish.

The silencer is made from 1.5mm thick sheet metal. The heat shield is made from 1mm-thick sheet metal. Finally, the flanges are 10mm thick.

The whole unit is coated with a ceramic thermal protection paint.

Fitted and tested on one of the eighty-two 901s produced, this silencer will be perfect for those seeking the authenticity of original parts.

DANSK Sport exhaust silencer in black painted steel with 2 stainless steel tailpipes for Porsche 356 B and C :

-> Porsche 356 B T5:
- 356 B 1600 - 60 hp (616/1) from 1960 to 1961
- 356 B 1600 S - 75 hp (616/2) from 1960 to 1961
- 356 B 1600 Super 90 - 90 hp (616/7) from 1960 to 1961

-> Porsche 356 B T6:
- 356 B 1600 - 60 hp (616/1) from 1962 to 1963
- 356 B 1600 S - 75 hp (616/12) from 1962 to 1963
- 356 B 1600 Super 90 - 90 hp (616/7) from 1962 to 1963

-> Porsche 356 C:
- 356 C 1600 - 75 hp (616/15) from 1964 to 1965
- 356 SC 1600 - 95 hp (616/16) from 1964 to 1965

This Sport version has a deeper, raspier sound than the original. It is fitted with US heater boxes Type RS11254 and RS11257.

Stainless steel tailpipe diameter: 63 mm

Can be fitted to the Carrera model (with specific double-outlet rear skirt such as reference: RS12049)

Sold with stainless steel outlets and mounting brackets

1-in1 WASP exhaust manifold specially developed by CSP & JP Motorsport for Type 1 Street & Dragster high-performance engines. 3 stage model for engines from 270cv and over.

- 3-stage exhaust manifold, volumetric effectiveness
- Meticulous, high-quality manufacturing
- 1.4301 stainless steel
- Pipes of equal length
- Corresponds to any engine width
- Lambda sensor bracket welded to the manifold
- Laser-cut flanges, CNC machined spans
- For Beetle with Type 1 engine
- Installs with no need for bodywork modification

For Polo 9N1/9N3:
- 1.9 TDi 130hp (ASZ, BLT)

CSP Sport stainless steel exhaust line, Sebring type, with J-tubes, for Porsche 356 B and C :

-> Porsche 356 B T5 :
- 356 B 1600 - 60 hp (616/1) from 1960 to 1961
- 356 B 1600 S - 75 hp (616/2) from 1960 to 1961
- 356 B 1600 Super 90 - 90 hp (616/7) from 1960 to 1961

-> Porsche 356 B T6 :
- 356 B 1600 - 60 hp (616/1) from 1962 to 1963
- 356 B 1600 S - 75 hp (616/12) from 1962 to 1963
- 356 B 1600 Super 90 - 90 hp (616/7) from 1962 to 1963

-> Porsche 356 C :
- 356 C 1600 - 75 hp (616/15) from 1964 to 1965
- 356 SC 1600 - 95 hp (616/16) from 1964 to 1965

Not suitable for Carrera versions

Supplied with assembly kit.

Tube diameter: 38 mm

For Golf 3:
- 1.4 60hp (ABD, AEX)
- 1.6 75hp (ABU, AEA)
- 1.8 75hp (AAM)