Exhaust silencer

DANSK Sport exhaust silencer in 304/4301 polished stainless steel twin outlet for Porsche 911 :

- 911 2.0 from 1965 to 1968
- 911 2.0 T / L / E / S from 1967 to 1969
- 911 2.2 T / E / S from 1970 to 1971
- 911 2.4 T / E / S from 1972 to 1973

Silencer with 2 inlets and 2outlets.
Diameter of outlets: 70 mm

TÜV/EEC Approved

For E21:
- 315
- 316
- 318
- 318 i
- 320 i

For Saloon with standard rear bumper only:
- 520i M52
- 523i M52
- 525i M54
- 528i M52

DANSK Sport exhaust silencer in painted steel for Porsche 356 B and C :

-> Porsche 356 B T5:
- 356 B 1600 - 60 hp (616/1) from 1960 to 1961
- 356 B 1600 S - 75 hp (616/2) from 1960 to 1961
- 356 B 1600 Super 90 - 90 hp (616/7) from 1960 to 1961

-> Porsche 356 B T6:
- 356 B 1600 - 60 hp (616/1) from 1962 to 1963
- 356 B 1600 S - 75 hp (616/12) from 1962 to 1963
- 356 B 1600 Super 90 - 90 hp (616/7) from 1962 to 1963

-> Porsche 356 C:
- 356 C 1600 - 75 hp (616/15) from 1964 to 1965
- 356 SC 1600 - 95 hp (616/16) from 1964 to 1965

This version of the DANSK is designed to give you a huskier sound. It preserves the original aesthetics, with the tailpipes in the chrome bananas, thanks to the S-pipes supplied.

The exhaust is designed for mounting on US-type heater boxes (such as RS11254 and RS11257).

Outlet diameter: 45 mm

S-pipe clamps supplied.

SSI stainless steel exhaust silencer for Porsche 911 2.7 :

- 911 2.7 from 1974 to 1975
- 911 2.7 S from 1974 to 1975
- 911 Carrera 2.7 from 1974 to 1975

Silencer with 2 entries
Diameter of the outlets : 60 mm

TÜV/EEC approved

For models:
- 1.4 i 80hp
- 1.4 TSi 122hp
- 1.6 i 102hp
- 2.0 TDi 110hp / 140hp / 170hp

Supplied without end piece, to be ordered separately

DANSK exhaust silencer in 304/4301 polished stainless steel for Porsche 911 2.7 :

- 911 2.7 from 1974 to 1975
- 911 2.7 S from 1974 to 1975
- 911 Carrera 2.7 from 1974 to 1975

Silencer with two inlets.
Outlet diameter: 60 mm

TÜV/EEC Approved

Brand: DANSK Original

SCART Sport Ultima Recital stainless steel rear exhaust for Porsche 911 type 996 :

- 996 phase 1 3.4 - 300 hp (M96.01/M96.02/M96.04) Carrera from 1998 to 2001
- 996 phase 1 3.4 - 300 hp (M96.01/M96.02/M96.04) Carrera 4 from 1998 to 2001
- 996 phase 2 3.6 - 320 hp (M96.03) Carrera from 2002 to 2005
- 996 phase 2 3.6 - 320 hp (M96.03) Carrera 4 from 2002 to 2005
- 996 phase 2 3.6 - 320 hp (M96.03) Carrera 4S from 2002 to 2005
- 996 phase 2 3.6 X51 - 345 hp (M96.03) Carrera from 2002 to 2005
- 996 phase 2 3.6 X51 - 345 hp (M96.03) Carrera 4 from 2002 to 2005
- 996 phase 2 3.6 X51 - 345 hp (M96.03) Carrera 4S from 2002 to 2005
- 996 phase 1 3.6 GT3 - 360 hp (M96.76) from 2000 to 2001
- 996 phase 2 3.6 GT3 - 380 hp (M96.79) from 2004 to 2005
- 996 phase 2 3.6 GT3 RS - 380 hp (M96.79) of 2004

SCART exhausts are made from stainless steel and assembled by hand.

They are 100% French made.

Supplied with mounting kit : stainless steel screws, all stainless steel locknuts, high temperature copper grease and electric and air bundles.

For optimal mounting, use the inlet sleeves in the silencers and the collars of the outlets in original quality (sleeves and collars not provided)

For Audi A3 8P Saloon and SportBack from 2003:
- 1.6L 102hp / Fsi 115hp
- 1.9L Tdi 105hp / 2.0L Tdi 140hp
- 2.0L FSi 150hp

100% stainless steel, diameter 54 mm with 145x95 mm oval outlet
To be fitted with AC50234

For E36 Saloon, Coupé, Cabriolet and Estate :
- 320i and 323i M50 and M52 engines

CSP Sport stainless steel exhaust line, Sebring type, with J-tubes, for Porsche 356 A :

- 356 A 1300 - 44 hp (506/1) from 1956 to 1957
- 356 A 1300 S - 60 hp (589/2) from 1956 to 1957
- 356 A 1600 - 60 hp (616/1) from 1956 to 1959
- 356 A 1600 S - 75 hp (616/2) from 1956 to 1959

Not suitable for Carrera versions

Supplied with assembly kit.

Tube diameter: 38 mm

DANSK Sport exhaust silencer in black painted steel with 2 stainless steel tailpipes for Porsche 356 B and C :

-> Porsche 356 B T5:
- 356 B 1600 - 60 hp (616/1) from 1960 to 1961
- 356 B 1600 S - 75 hp (616/2) from 1960 to 1961
- 356 B 1600 Super 90 - 90 hp (616/7) from 1960 to 1961

-> Porsche 356 B T6:
- 356 B 1600 - 60 hp (616/1) from 1962 to 1963
- 356 B 1600 S - 75 hp (616/12) from 1962 to 1963
- 356 B 1600 Super 90 - 90 hp (616/7) from 1962 to 1963

-> Porsche 356 C:
- 356 C 1600 - 75 hp (616/15) from 1964 to 1965
- 356 SC 1600 - 95 hp (616/16) from 1964 to 1965

This Sport version has a deeper, raspier sound than the original. It is fitted with US heater boxes Type RS11254 and RS11257.

Stainless steel tailpipe diameter: 63 mm

Can be fitted to the Carrera model (with specific double-outlet rear skirt such as reference: RS12049)

Sold with stainless steel outlets and mounting brackets

JETEX Stainless Steel Exhaust Muffler for Mazda MX-5 NC

For NC all engines (2005-2008)

All stainless steel, the JETEX dual tailpipe muffler mounts in place of the stock exhaust. With excellent build quality, this muffler will release the noise from your MX-5 while maintaining a reasonable sound volume for road use.

Includes:
- Stainless steel rear muffler
- Screws
- Gasket

Exit diameter: 90 mm

Rear silencer outlet pipe for VOLKSWAGEN Transporter T5 panel van - two-wheel drive van:
- 2.5 TDi 130hp (AXD)
- 2.5 TDi 131hp (BNZ)
- 2.5 TDi 163hp (BLJ)
- 2.5 TDi 174hp (AXE, BPC)
- 2.0 TDi 84hp (CAAA)
- 2.0 TDi 102hp (CAAB)
- 2.0 TDi 114hp (CAAD)
- 2.0 TDi 136hp (CAAE, CCHB)
- 2.0 TDi 140hp (CAAC, CCHA)
- 2.0 BiTDi 180hp (CFCA)

The famous CSP PYTHON exhaust system is now available for VW Type 3. Intended for original or enhanced engines, their design and finish meet all expectations. This high-performance exhaust can be connected to the original heat exchangers for on-road use. The Python manifold made of 1.4307 stainless steel has tubes of equal length and is manufactured with a precision corresponding to the maximum speed of the exhaust gases, which improves the torque curve and the maximum power. The silencer made of polished 1.4301 stainless steel produces a sporty, muffled sound. CSP quality manufacturing. Diameter: 45 mm.

For VW:
- Type 3, Notchback, Fastback, Variant
Years: 04/1961 ->07/1973
- Karmann-Ghia type 34
Years: 09/1961 ->07/1969

For Sedan, Coupé, Cabriolet

For Audi A3 8P Sedan from 2003 :
- 1.6L102hp / Fsi 115hp
- 1.9L Tdi 105hp / 2.0L Tdi 140hp
- 2.0L FSi 150hp

100% stainless steel, diameter 54 mm with 2 round 80 mm outlets
Assembly with AC50234

SCART Stainless steel Sport exhaust silencer for Porsche 914-4 1.7 and 1.8 :

- 914-4 1.7 - 80 hp (022-W) from 1970 to 1973
- 914-4 1.7 - 80 hp (022-EA) from 1972 to 1973
- 914-4 1.7 - 72 hp (022-EB) from 1972 to 1973
- 914-4 1.8 - 85 hp (021-AN) from 1974 to 1976
- 914-4 1.8 - 76 hp (022-EC) from 1974 to 1976

Hand-assembled, they are also made in France. This SCART Sport exhaust takes the form of the silencer from the legendary 911. It has the same interfaces and size as the original silencer. It allows installation on the original exhaust manifolds of your Porsche 914.

The sound has been reworked to offer a more hoarse and metallic sound than the original.

Outlet diameter : 60 mm

Supplied with the assembly kit and high temperature copper grease.

For Golf 3:
- 1.9 Diesel 64hp (AEY)
- 1.9 TDi 90hp (1Z, AHU, ALE)

High-efficiency "Python" CSP Sport exhaust system
(not approved) Version with 42 mm tubes
Compact muffler in polished stainless steel 1.4301
4-in-1 manifold in 1.4507 stainless steel
Recommended installation with CSP 42mm heating boxes or J-tubes.
Cannot be fitted with original heater boxes.
Also consider CSP VC20460 heating fittings.
Model without heater with double carburetor
For :
- Combi Bay Window 1600 1972 ->1979
Ideal for T1 engines (except 1200) with max. valves 44 / 37.5 mm
use up to ->7000 rpm.