Exhaust silencer

This pair of stainless steel EVOX valves can be used with a remote control. It is suitable for Porsche 911 type 997 phase 1 :

- 997 phase 1 3.6 - 325 hp (M96.05) Carrera and Carrera 4 from 2005 to 2008
- 997 phase 1 3.8 - 355 hp (M97.01) Carrera S and Carrera 4S from 2005 to 2008
- 997 phase 1 3.8 X51 - 380 hp (M97.01S) Carrera S and Carrera 4S from 2007 to 2008

In position "Closed" : sobriety and elegance are waiting for you. Ideal to wake up your Flat 6 discreetly and (almost) go unnoticed every day, while preserving the aura of your Porsche.

In position "Open" : the world of racing is open to you! With each touch of the right pedal, it is an emotion and an adrenaline that will make you rediscover your 997 !

Plan to acquire the EVOX exhaust outlets with these silencers for the Porsche 997 phase 1 :
- 997 phase 1 3.6 - 325 hp (M96.05) Carrera and Carrera 4 from 2005 to 2008
- 997 equipped with PSE (Porsche Sport Exhaust)

For Golf 3:
- 2.0 8S 115hp (2E, ADY) 08/92 ->07/95

Double-outlet version of the DANSK RS10714 Sport silencer.
Made of polished stainless steel, this silencer system offers a racy look with its 2 x 84 mm outlets.To the untrained eye, it could give the impression of an original system. The sound is full of low-end rasp and brings out the sound of the Flat 6 to perfection.
Designed to be fitted to G-series Porsche 911s from 1975 onwards, with small type RS11272 intercoolers:
- 911 2.7 from 1975 to 1977- 911 2.7 S from 1975- 911 Carrera 2.7 from 1975 to 1976- 911 Carrera 3.0 from 1976 to 1977- 911 3.0 SC from 1978 to 1983- 911 Carrera 3.2 from 1984 to 1989
1-inlet silencerOutlet diameter: 84 mm
Rear valance cut-out required to accommodate tailpipes.TÜV/CEE approved

For Golf 3 estate:
- 1.9 Diesel 64hp (1Y, AEY)

Complete stainless steel exhaust kit for T4 Type 1700, 1800 and 2.0 l engines before 1978 (connectors on cylinder heads), installed in a Combi Split.
High-performance exhaust, the manifold pipes are the same length and the gas flows are specifically designed (ignition order)

Vintage Speed Stainless steel exhaust with 2 outlets for Porsche 912 :

- 912 1.6 de 1965 à 1969

Diameter of outlets : 50.8 mm

Can be mounted on original heating boxes type RS11260 and RS11263 heater boxes

4-in-1 Sport exhaust silencer manifold
Chromed side outlet under the skirt.
Adjustable width to fit all Type 1 engines

For Beetle

Inoxcar exhaust silencer , replica of the famous"Devil Cône" for Volkswagen Golf 1 GTI 1.8 112hp, a legendary accessory that could be fitted directly to your car at the dealership.

- Golf 1 GTI 1.8L 112hp from 08/1982 to 12/1983 (engine code DX)
- Golf 1 GTI 1.8L 112hp from 08/1982 to 12/1983 (engine code JJ)

100% stainless steel, to be fitted in place of the original.

Don't forget to replace your muffler's mounting silentblocks.

For New Mini R56 Cooper,
1.6 122hp from 2007 ->2013
Assembly on original line with no adaptation

For New Mini R56 One:
- 1.4 75/95hp from 2007->
- 1.6 75/98hp from 2009->
Assembly on original line with MC09062 adapter for models after 03/2010->

Discreet performance with a beautiful Sport sound. Fits under the right fender. EMPI value for money. Model with small inclined flange for 4-in-1 manifold ref: VC20002.

For VW Beetle
with Type 1 engine

Performant et discret avec une belle sonorité Sport, ce véritable silencieux se loge sous l'aile droite. Uniquement pour collecteur 4 en 1 type Merged.

Mecatechnic conseille d'appliquer une peinture haute température avant l'utilisation du silencieux pour plus de longévité et un meilleur aspect.

SCART stainless steel sport exhaust silencer for Porsche 911 type 991 Carrera phase 1 from 2012 to 2016 :

- 991 Carrera - 3.4 350hp (A104) from 2012 to 2016
- 991 Carrera 4 - 3.4 350hp (A104) from 2013 to 2016
- 991 Carrera S - 3.8 400hp (A103) from 2012 to 2016
- 991 Carrera 4 S - 3.8 400hp (A103) from 2013 to 2016

SCART silencers are in Martin SCART's workshop in Goussainville.
Several tests and assemblies have been carried out beforehand at the workshop to guarantee turnkey assembly and the best possible sound.
You'll get a raucous, powerful sound when revving up, but one that's relatively discreet at cruising speed . Choosing SCART means opting for a unique driving experience behind the wheel of your 991.

The silencer is mounted directly on the catalytic converter outlet. Installation takes 3 hours. The rear bumper must be removed.
The silencer has an adjustable side so that it can be adjusted without forcing.

Included in the assembly kit :

- Gaskets
- Stainless steel screws
- Stainless steel lock nuts
- High-temperature copper grease
- Two straps.

We recommend that you apply copper grease to the screw threads and joint surfaces during assembly.

SCART Silencer in stainless steel for:
- 968

Optimized gas flow for enhanced performance.

SCART sport backbox in stainless steel for Porsche Panamera type 970 2 and 4 from 2011 to 2016:

- 970 Panamera - 3.6 300hp (4620) from 2011 to 2013
- 970 Panamera 4 - 3.6 300hp (4640) from 2011 to 2013

- 970 Panamera - 3.6 310hp (CWAA) from 2014 to 2016
- 970 Panamera 4 - 3.6 310hp (CWAA) from 2014 to 2016

This SCART sports silencer will give your Panamera an undeniably sportier sound.

Designed in France at Goussainville (95), this muffler uses the same dimensions as the original one, making it easy to fit without the need for modifications.

It will take around 3 hours to remove the original silencer and fit the new one. Removal of the rear bumper is not necessary, but theuse of a forklift is essential.

Supplied with :

- twin tailpipes
- assembly kit with clamps and high-temperature copper grease.

For Audi TT 8N Quattro Coupé/Roadster from 1999 to 2006:
- 1.8L Turbo 180hp
- Oval outlet, diameter 120x80 mm

100% stainless steel, diameter 63.5 mm

Stainless steel sport exhaust silencer with SCART valves for Porsche 911 type 991 Carrera phase 1 from 2012 to 2016 :

- 991 Carrera - 3.4 350hp (A104) from 2012 to 2016
- 991 Carrera 4 - 3.4 350hp (A104) from 2013 to 2016
- 991 Carrera S - 3.8 400hp (A103) from 2012 to 2016
- 991 Carrera 4 S - 3.8 400hp (A103) from 2013 to 2016

SCART silencers are designed in Martin SCART's Goussainville workshop.
Several tests and assemblies have been carried out beforehand in the workshop to guarantee turnkey assembly and the best possible sound.
You'll get a raucous, powerful sound with the valves open, but a relatively discreet one when the valves are closed. Choosing SCART means opting for a unique driving experience behind the wheel of your 991.

The silencer is mounted directly on the catalytic converter outlet. Installation takes 8 hours. The rear bumper must be removed.
The silencer has an adjustable side so that it can be adjusted without forcing.

Included in the assembly kit :

- Gaskets
- Stainless steel screws
- Stainless steel lock nuts
- High-temperature copper grease
- Two straps.

We recommend that you apply copper grease to the screw threads and joint surfaces during assembly.

SCART Sport stainless steel silencers for Porsche :
- 993 3.6 Carrera and Carrera 4 from 1995 to 1998
- 993 3.6 Carrera S and Carrera 4S from 1996 to 1998
- 993 3.8 Carrera RS from 1995 to 1996

SCART exhausts are made from stainless steel and assembled by hand.

They are 100% French made.

For E28:
- 518
- 518 i

These exhaust silencers are suitable for Porsche 911 type 996 phase 2 and GT3 :

- 996 phase 2 3.6 - 320 hp (M96.03) Carrera from 2002 to 2005
- 996 phase 2 3.6 - 320 hp (M96.03) Carrera 4 from 2002 to 2005
- 996 phase 2 3.6 - 320 hp (M96.03) Carrera 4S from 2002 to 2005
- 996 phase 2 3.6 X51 - 345 hp (M96.03) Carrera from 2002 to 2005
- 996 phase 2 3.6 X51 - 345 hp (M96.03) Carrera 4 from 2002 to 2005
- 996 phase 2 3.6 X51 - 345 hp (M96.03) Carrera 4S from 2002 to 2005
- 996 phase 1 3.6 GT3 - 360 hp (M96.76) from 2000 to 2001
- 996 phase 2 3.6 GT3 - 380 hp (M96.79) from 2004 to 2005
- 996 phase 2 3.6 GT3 RS - 380 hp (M96.79) of 2004

To express your Flat 6 on demand, these exhaust silencers incorporate a valve system. The device is operated by a simple switch and guarantees a discretion close to the origin on all phases of use of your Porsche.

Ideal vis-à-vis the neighborhood or possibly for access to certain circuits where the level of decibel is more regulated. It therefore offers a compromise to those who want the benefits of a true Sport silencer, while keeping, on demand, the relative discretion of an original silencer.

Coupled with Scart catalysts with 200 cells, we obtain a sound close to a racing car.

The SCART exhausts are stainless steel and assembled by hand, their construction is 100% French.

Delivered with the mounting kit: stainless steel screws, all stainless steel locknuts, high temperature copper grease and electric and air bundles.

For optimal mounting, use the inlet sleeves in the silencers and the collars of the outlets in original quality (sleeves and clamps not provided)

For AudiTT 8N Quattro Coupé/Roadster and VR6 from 1999 to 2006:
- 1.8L Turbo 180 - 225 - 240hp
- 3.2L VR6 250hp from 2003 to 2006
- Dual round outlet, diameter 100 mm

100%stainless steel, modification of bumper maybe necessary