Exhaust silencer

For E30:
- 316 M10 up to ->09/87
- 318 i M10

Vintage Speed ​​Superflow exhaust silencer in 100% stainless steel 304 for Porsche 356 A, B T5, B T6 and C:

-> Porsche 356 A :
- 356 A 1300 - 44 hp (506/1) from 1956 to 1957
- 356 A 1300 S - 60 hp (589/2) from 1956 to 1957
- 356 A 1600 - 60 hp (616/1) from 1956 to 1959
- 356 A 1600 S - 75 hp (616/2) from 1956 to 1959

-> Porsche 356 B T5 :
- 356 B 1600 - 60 hp (616/1) from 1960 to 1961
- 356 B 1600 S - 75 hp (616/2) from 1960 to 1961
- 356 B 1600 Super 90 - 90 hp (616/7) from 1960 to 1961

-> Porsche 356 B T6 :
- 356 B 1600 - 60 hp (616/1) from 1962 to 1963
- 356 B 1600 S - 75 hp (616/12) from 1962 to 1963
- 356 B 1600 Super 90 - 90 hp (616/7) from 1962 to 1963

-> Porsche 356 C :
- 356 C 1600 - 75 hp (616/15) from 1964 to 1965
- 356 SC 1600 - 95 hp (616/16) from 1964 to 1965

Not suitable for Carrera versions

Outlet diameter : 50.8 mm

This double outlet system, very well made, with high quality welds, is mounted on the original heating boxes. It gives the Porsche 356 a deeper and harsher sound.

100% 304 stainless steel Sport exhaust silencer
High-quality "Vintage Speed" brand
Abarth-style four-outlet model, without reheating.
Suitable for Type 1 foot-molded 25 or 30 hp engines and rear valance without notch. Ideal as a complement to a vintage Okrasa or Judson double-carburetor preparation!

For VW :
- Beetle, 12/1947 ->07/1955
until engine N° ->1 120 614.
- Combi Split, 01/1950 ->05/1959
up to engine N° ->3 399 999.

For BMW E34 525TD/TDS Saloon and Estate 02/92->01/97 M51 engine with catalytic converter

For Jetta:
- 1.6 turbo Diesel 70hp (JR)
- 1.6 turbo Diesel Intercooler 80hp (RA, SB)

Suitable for:
- Golf 4 R32 V6 3.2
- Golf 4 4-Motion (4x 4) all engines from 00->
-New Beetle RSi V6 3.2

SCART Sport Classic stainless steel rear silencerfor Porsche 911 type 996 :

- 996 phase 1 3.4 - 300 hp (M96.01/M96.02/M96.04) Carrera from 1998 to 2001
- 996 phase 1 3.4 - 300 hp (M96.01/M96.02/M96.04) Carrera 4 from 1998 to 2001
- 996 phase 2 3.6 - 320 hp (M96.03) Carrera from 2002 to 2005
- 996 phase 2 3.6 - 320 hp (M96.03) Carrera 4 from 2002 to 2005
- 996 phase 2 3.6 - 320 hp (M96.03) Carrera 4S from 2002 to 2005
- 996 phase 2 3.6 X51 - 345 hp (M96.03) Carrera from 2002 to 2005
- 996 phase 2 3.6 X51 - 345 hp (M96.03) Carrera 4 from 2002 to 2005
- 996 phase 2 3.6 X51 - 345 hp (M96.03) Carrera 4S from 2002 to 2005
- 996 phase 1 3.6 GT3 - 360 hp (M96.76) from 2000 to 2001
- 996 phase 2 3.6 GT3 - 380 hp (M96.79) from 2004 to 2005
- 996 phase 2 3.6 GT3 RS - 380 hp (M96.79) of 2004

SCART exhausts are made from stainless steel and assembled by hand.

They are 100% French made.

Supplied with mounting kit: stainless steel screws, all stainless steel locknuts and high temperature copper grease.
For optimal mounting, use the inlet sleeves in the silencers and the collars of the outlets in original quality

POWERSPRINT stainless steel twin tailpipe muffler for BMW E21 from 1975 to 1983 :
- E21 316- E21 318- E21 320- E21 320i
Enhance your E21 with this muffler designed entirely in stainless steel to guarantee excellent longevity.The sound is sportier than the original muffler, offering greater pleasure when revving up, without being dizzying at constant revs.

This stainless steel EVOX exhaust is suitable for Porsche Boxster 986 :

- 986 2.5 Boxster - 204 hp (M96.20) from 1997 to 1999
- 986 2.7 Boxster - 220 hp (M96.22) from 2000 to 2002
- 986 2.7 Boxster - 228 hp (M96.23) from 2003 to 2004
- 986 3.2 Boxster S - 252 hp (M96.21) from 2000 to 2002
- 986 3.2 Boxster S - 260 hp (M96.24) from 2003 to 2004
- 986 3.2 Boxster S550 - 266 hp (M96.24) from 2003 to 2004

Their design with the central mounting plate allows mounting on all versions, without adapter. They benefited from a study and optimization of the flow of exhaust gases. The sound is uncompromising, raucous and addictive, the engine even more responsive. Counter pressures have been reduced to improve the performance of the exhaust gas flow.

Supplied with chrome muffler outlets and the Porsche clamping sleeve

Being a performance part, this exhaust is reserved for use on the circuit only, it does not benefit from CE approval for use on open roads.

For Audi A3 8L Quattro from 2000 to 2002:
- 1.9L Tdi 130hp
100% stainless steel

- diam 63.5 mm with dual round outlet, diameter 90 mm
for Style S3 bumper"
to be fitted with AC50219"

This Black EMPI exhaust silencer for Volkswagen Buggy from the "Baja" range is the benchmark for buggies.
High-performance and quiet, this exhaust offers a sporty yet discreet sound and high ground clearance. Supplied on its own, it is compatible with original heater boxes or J-tubes.
Compatible with Buggy, Trike and Baja based on VW type 1 at 1300, 1500 and 1600cc.

Exhaust silencer SCART Sport Type Sausage / Hot Dog for Porsche 911 :

- 911 2.7 from 1974 to 1975
- 9112.7 S from 1974 to 1975
- 911 Carrera 2.7 from 1974 to 1975

The SCART sonority "Super Sound" it's :
- a deep and powerful sound on the keyturn
- a very discreet sound at constant speed
- a dynamic sound accelerations

SCART exhausts are made from stainless steel and assembled by hand.

They are 100% French made.

Supplied with mounting kit including :
- seals, stainless steel screws, stainless steel nuts and high temperature copper grease
- 2 SCART straps

This stainless steel DANSK exhaust muffler is painted to keep your Porsche 911 looking original. It has a lined stainless steel sheet and is designed exactly in the original Porsche and stainless steel specifications.

Expected to be mounted on the 911 from from 1975, year when small exchangers of K-Jetronic make their appearance (like RS11272). It is therefore suitable for the following Porsche 911 :

- 911 2.7 from 1975 to 1977
- 911 2.7 S 1975
- 911 Carrera 2.7 from 1975 to 1976
- 911 Carrera 3.0 from 1976 to 1977
- 911 3.0 SC from 1978 to 1983

Exhaust with 1 input
Diameter of the outlet : 60 mm

TÜV / EEC approved

Sport SCART stainless steel exhaust mufflers with chrome double outputs for Porsche Boxster 986 :

- 986 2.5 Boxster - 204 cv (M96.20) de 1997 a 1999
- 986 2.7 Boxster - 220 cv (M96.22) de 2000 a 2002
- 986 2.7 Boxster - 228 cv (M96.23) de 2003 a 2004
- 986 3.2 Boxster S - 252 cv (M96.21) de 2000 a 2002
- 986 3.2 Boxster S - 260 cv (M96.24) de 2003 a 2004
- 986 3.2 Boxster S550 - 266 cv (M96.24) de 2003 a 2004

Several years were needed to design this muffler, to accelerate the exhaust gas to produce a sound worthy of a sports car. Coupled with SCART RS60041 catalysts you will get a hoarse, deep and furious sound, giving the Boxster a whole new look.

Comes with mounting kit containing :
- Stainless screws
- Inox brake nuts
- High temperature coppery grease

SCART cup type stainless steel silencer with 1 outlet for:
- 964 Carrera 2 and Carrera 4 from 1989 to 1994
- 964 Carrera RS

This silencer replaces the longitudinal silencer and final silencer.

This silencer improves performance and is a few kilos lighter.

SCART exhausts are made from stainless steel and assembled by hand.

They are 100% French made.

Sport silencer with 2 large diameter side outlets 70 mm
Superior quality construction in mirror-polished stainless steel.

For Combi Bay Window,
08/1971 ->07/1979
Type 4 engines 1700, 1800, 2000cc

Complements the silencer GC50403
Suitable for Golf 4 V6 3.2 type R32
The outlets are suitable for the original bumper.

Adaptable with modification of the rear skirt for:
AUDI
- A3 S3 1.8 turbo 99 ->02
- A3 Quattro (4 x 4) all engines from 99->

VW
- Golf 4 4-Motion (4 x 4) allengines from 00->

SCART Sport Classic stainless steel rear silencers for Porsche :
- 997 3.6 Carrera et Carrera 4 de 2005 à 2008
- 997 3.8 Carrera S et Carrera 4 S de 2005 à 2008

SCART exhausts are made from stainless steel and assembled by hand.

They are 100% French made.

For Audi A3 8PSaloon and SportBack from 2003:
- 1.6L 102hp / Fsi 115hp
- 1.9L Tdi105hp / 2.0L Tdi 140hp
- 2.0L FSi 150hp

100% stainless steel, diameter 54 mm, 145x95 mm dual oval outlet
To be fitted with AC50237, modification of bumper required

145 x 95 mm oval stainless steel outlets
for GC50520DS silencers