Exhaust manifold

For Golf 2
- 1.6 Turbo Diesel 70cv (JR)
- 1.6 Turbo Diesel Intercooler 80cv (RA, SB)

For Passat 3
- 1.6 Turbo Diesel Intercooler 80cv (RA, SB)

The exhaust system for DYANE and Acadiane with 602cc engine is specific to this engine.

This primary muffler is also referred to as the "Horned Beast" by CV2 enthusiasts.
It is connected to the heating boxes by two 47mm clamps, and to the intermediate tube - gooseneck - by a 49mm clamp.
We recommend that you use quality clamps to avoid any leakage from the exhaust.

Intermediate exhaust tube between the turbo and the silencer, model with flange. Original quality.

For VW Transporter T25/T3, Bus,
Caravelle, Joker, Syncro (4 x 4).
Years: 08/1989 ->07/1992
Chassis no. L-000 001 ->N-015 000.
Engine: 1.6 Turbo-Diesel 70hp (JX)

For Golf 3 saloon, cabriolet and Golf 4 cabriolet:
- 1.6 100hp (AEK, AFT, AKS)

The front exhaust silencer (horned) for DYANE6 and Acadiane - STAINLESS STEEL is specific to this 602cc engine.

This stainless steel primary silencer is also called a "horned silencer" by 2cv fans.
This high-quality silencer is connected to the heat exchangers by two 47mm clamps, and to the intermediate exhaust pipe (gooseneck) by a 49mm clamp.
We recommend that you use quality clamps to avoid any leakage from the exhaust.

4-in-1 exhaust manifold for Mazda MX-5 NC & NCFL

This 4-in-1 manifold is designed to provide additional power by improving the airflow.

Features of the 4-in-1 manifold

- exhaust manifold made of 100% polished stainless steel.
- Provides additional power and improves airflow for better performance and longer engine life!
- Comes with a new gasket to be placed between the manifold and the cylinder head and the gasket that goes between the manifold and the intermediate pipe as well as the 2 sensor plugs

Please note: You must buy with this exhaust manifold the lambda sensor displacement kit part no.: MX11719

Outlet diameter: 60 mm
Allows the 60 mm Supersprint pipe for Golf 1 to be connected

The exhaust system for 2cv and derivatives with 435cc engines is specific to this engine.

This primary muffler, also known by riders as the "horned beast", is narrower than the 602cc version.
Its connection to the heating boxes is made by 2 clamps of 47mm.
Its connection to the intermediate tube - gooseneck - by a 49mm collar.
We recommend that you use quality clamps to avoid any leakage from the exhaust.

Exhaust manifold heat shield

For VW Golf Saloon and Convertible, Caddy, Jetta 1 and Scirocco 1 & 2
With engine code: JB, GH, EM, HN, DX, KT, EX, EWA

The front exhaust silencer (horned) for 2cv vanss with 602cc engines - STAINLESS STEEL is specific to this engine.

This stainless steel primary silencer is also called a "horned silencer" by 2cv fans.
This high-quality silencer is connected to the heat exchangers by two 47mm clamps, and to the intermediate exhaust pipe (gooseneck) by a 49mm clamp.
We recommend that you use quality clamps to avoid any leakage from the exhaust.

Rear 2-cylinder exhaust manifold & 4
To fit on silencer end.

For Transporter T25/T3
Water-cooled Petrol engines:
- 1900cc (DG), 01/1986 ->07/1992
since chassis no. 24-G-058 001->
- 2100cc (DJ, MV, SS), 08/1985 ->07/1992
since chassis no. 24-G-000 001->

Syncro version (4 x 4):
- 2100cc (DJ), 08/1985 ->07/1992
since chassis no. 24-G-000 001->

Switzerland version :
- 1900cc (DF, SP), 08/1986 ->07/1992
since chassis no. 24-H-000 001->
- 2100cc (SR), 08/1986 ->07/1992

Pour Golf 2:
- 1.6 75hp (EZ, ABN)
- 1.8 82hp (HM)

The under-gearbox exhaust system for DYANE 4 is specific to this engine.

This primary muffler, also known by riders as the "horned beast", is narrower than the 602cc version.
Its connection to the heating boxes is made by 2 clamps of 47mm.
Its connection to the intermediate tube - gooseneck - by a 49mm collar.
We recommend that you use quality clamps to avoid any leakage from the exhaust.

Exhaust manifold in cast iron on cylinder head for Turbo (not supplied).

For VW Transporter T25/T3, Camper,
Caravelle, Joker, Syncro (4 x 4).
Years: 08/1984 ->07/1992
Engine: 1.6 Turbo-Diesel 70hp (JX)

DANSK heat exchanger in polished stainless steel for Porsche 911 2.4 and 2.7 with mechanical injection :

- 911 2.4 T / E / S from 1972 to 1973
- 911 2.7 from 1974
- 911 2.7 S from 1974
- 911 Carrera 2.7 from 1974

Stainless steelexhaust manifold for Volkswagen Polo 86C from 1974 to 1994:

- All models (including G40)

Supplied with gasket.
This manifold does not have a lambda sensor slot.

WARNING: Not suitable for 1.3L 55hp model (engine code MH)!

For Golf 1 from 08/1979 ->08/1983:
- 1.1 50hp (GG)
- 1.3 60hp (GF)

Original cast iron manifold, allows to replace a cracked part without modifying the vehicle,

For E60 & E61:
- 525 d M57N
- 530 d M57N

Stainless steel manifold in front of the exhaust catalytic converter, for double pre-heating

For VW Cox 1600i Mexico (10/1992-)

Header lowering tube for Mazda MX-5 NB

For NB all models from 1998 to 2000
Does not fit NBFL (2001-2005)

Locates between the exhaust manifold and the catalytic converter