Exhaust manifold

Complete stainless steel 4-2-1 manifold for Golf 2 1800cc
Suitable for models:
Version with carburettor 90hp
GTi 8S 112hp version.

4 in 1 stainless steel manifold
for 1.8 Turbo 20V transverse engines (VW, Audi, Seat, Skoda) including S3 and Cupra R
T3 flange: 86 x 45mm
with flange for external Wastegate: 35/38mm

Pas prévu pour moteur 1200cc

4 in 1 stainless steel manifold
for 1.8 Turbo engine
Flange T25: 73 X 40mm

Exhaust manifold for diesel engine
Original Volkswagen Classic Parts.

For VW
- Passat, 82 ->88
- Transporter T25 / T3, 81 ->92
Engines
- 1.6 Diesel 50hp (CS)
- 1.6 Diesel 54hp (CR, JK)
- 1.7 Diesel 57hp (KY)

Front exhaust manifold on 1 cylinder & 3
Tobe fitted on gearbox end.

For Transporter T25/T3 Syncro (4 x 4)
Water-cooled Petrol engines:
- 2100cc (DJ, MV), 08/1985 ->07/1992
since chassis no. 24-G-000 001->
Switzerland version :
- 2100cc (SR), 08/1986 ->07/1992
since chassis no. 24-H-000 001->

SSP 4 in 1 sport exhaust manifold stainless steel manufacturing.

For Beetle
with engine Type 1: 1300, 1500, 1600+
(except 1300 rear type)

4 in 1 RACING BEAT exhaust manifold for Mazda MX-5 NB and NBFL 1.8L

- The RACING BEAT exhaust manifold is made of polished 304 stainless steel with cast-in fitting flange
- The diameter of the tubes near the cylinder head is 43mm
Comes with instructions and the gasket that goes between the exhaust manifold and intermediate pipe
- Comes without screws and manifold gasket on cylinder head

Female EGR valve connector on the manifold

WARNING: depending on your vehicle-s country of origin, the EGR valve connection may be either male or female, check beforehand on your vehicle if the connection on the right of the manifold corresponds to MX11692 or MX11698

Rear 2-cylinder exhaust manifold & 4
To fit on silencer end.

For Transporter T25/T3 Syncro version (4 x 4)
Water-cooled Petrol engines:
- 1900cc (DG), 11/1985 ->07/1992
since chassis no. 24-G-043 001->
- 2100cc (MV), 08/1985 ->07/1992
since chassis no. 24-G-000 001->

Switzerland version :
- 1900cc (SP), 08/1986 ->07/1992
since chassis no. 24-H-000 001->
- 2100cc (SR), 08/1986 ->07/1992

4 in 1 stainless steel manifold
for 1.8 Turbo 20V transverse engines (VW, Audi, Seat, Skoda)
Flange T25: 73 X 40mm
with flange for external Wastegate: 35mm

For Golf 3 1.8 90hp (ABS, ADZ, ACC):
- Golf 3 saloon & estate from 92 ->95
(up to chassis no.->1H-S-800 000 or 1H-SB-200 000)
- Golf 3 cabriolet from 94 ->95 (up to chassis no.->1E-S-024 273)

TA Technics4-in-1 exhaust manifold for Peugeot 306 1.4l and 306 1.6l (1993-1999)
This manifold enhances power at high revs.
Supplied with manifold lowering and clamp.
Assignments :- 306 1.4 - 8V 1360cm3 75hp (TU3) phase 1 from 1993 to 1997- 306 1.4 - 8V 1360cm3 75hp (TU3) phase 2 from 1997 to 1999- 306 1.6 - 8V 1587cm3 90hp (TU5) phase 1 from 1993 to 1997- 306 1.6 - 8V 1587cm3 90hp (TU5) phase 2 from 1997 to 1999

Double coupling inlet tube on left-hand side between the two manifolds and the end silencer tube.

For Transporter T25/T3, 08/1985 ->07/1992
including Syncro version (4 x 4)
Water-cooled engines:
- 1900 (DG), Switzerland (DF, SP)
- 2100 (DJ, MV), Switzerland (SR)

Steel manifold
for turbo assembly
for 2.8 and 3.2 V6 engine
T3 flange: 86 x 45mm
with flange for external Wastegate: 38/40mm

Front manifold outlet tube
for Passat 3 Saloon & Estate 92 ->95
(from chassis 31-N-240001 up to chassis ->3A-S-225 000)
Engines 1.8 90hp (ABS, ADZ) with or without catalytic converter.

DANSK Racing right exhaust manifold type "spaghetti" in painted steel for Porsche 911 from 1965 to 1977 :

- 911 2.0 - 130 hp (901.01/05/06) from 1965 to 1967
- 911 S 2.0 - 160 hp to 170 hp (901.02/08/10) from 1967 to 1969
- 911 T 2.0 - 110 hp (901.03/13/16/19) from 1968 to 1969
- 911 L 2.0 - 130 cv (901.06/07) of 1968
- 911 E 2.0 - 140 hp (911.09/11) of 1969
- 911 T 2.2 - 125 hp (911.03/06) from 1970 to 1971
- 911 E 2.2 - 155 hp (911.01/04) from 1970 to 1971
- 911 S 2.2 - 180 hp (911.01) from 1970 to 1971
- 911 Tv 2.4 - 130 cv (911.57/67) from 1972 to 1973
- 911 E 2.4 - 165 hp (911.52/62) from 1972 to 1973
- 911 S 2.4 - 190 cv (911.53/63) from 1972 to 1973
- 911 Carrera RS 2.7 - 210 hp (911.83) of 1973
- 911 2.7 - 150 hp (911.92/97/41/46) from 1974 to 1975
- 911 S 2.7 - 175 hp (911.93/98/42/47) from 1974 to 1975
- 911 2.7 - 165 hp (911.81/86) from 1976 to 1977
- 911 Carrera 2.7 - 210 hp (911.83) from 1974 to 1976

It incorporates the welded connection tube, allowing mounting with an exhaust silencer with bolted flange.

External diameter : 38 mm

For Polo 6N2:
- 1.4 75hp (AHW, APE, AUA)
- 1.4 100hp (AFK, AQQ, AUB)
- 1.6 125hp (ARC)

4 -2-1 manifold for 60 mm exhaust pipe
For the assembly of a KR engine in a Golf 1 saloon and cabriolet, Jetta 1, Caddy and Scirocco 1

Also suitable for Scirocco with original 1.8 16s KR engine

Front exhaust manifold on 1 cylinder & 3
To fit on gearbox end.

For Transporter T25/T3 with Petrol engines:
- 1900 (DH) 82hp 01/83 ->07/85
- 2100 (DJ) 112hp 08/84 ->07/85
Except for Syncro version (4 x 4).

Front exhaust manifold on 1 cylinder & 3
To be fitted on gearbox end.

For Transporter T25/T3
Water-cooled Petrol engines:
- 1900cc (DG), 01/1986 ->07/1992
since chassis no. 24-G-058 001->
Switzerland version :
- 1900cc(DF, SP), 08/1986 ->07/1992
since chassis no. 24-H-000 001->