Oil drain plug

For
- Beetle, Karmann-Ghia, Type 3, Combi, 181, 08/1960->
with 1200, 1300, 1500, 1600 cc engines
- Transporter T25/T3, 05/1979 ->12/1982
with 1600 cc type CT engine

The originaloil suctionstrainer is a component of the oil filtration system. It filters impurities from the engine oil, helping to protect internal engine components from premature wear. It is a key engine component, helping to maintain clean oil circulation and ensure optimum lubrication.Center hole diameter: 14.5 cm (most of it)This oil strainer is suitable for VW Beetle, Karmann-Ghia, Type 3, Combi, 181, since 08/1960 with 1type 1 engines, 1200, 1300, 1500, 1600cc.or Transporter T25 / T3, from 05/1979 to 12/1982 with 1600cc type CT engine

Drain screw for Porsche 356 pre A, A, B and C :

-> Porsche 356 pre-A :
- 356 1100 - 40 hp (369) from 1950 to 1954
- 356 1300 - 44 hp (506 and 506/2) from 1951 to 1955
- 356 1300 S - 60 hp (589 and 589/2) from 1954 to 1955
- 356 1500 Cabriolet - 60 cv (527) from 1952
- 356 1500 - 55 hp (546 and 546/2) from 1953 to 1955
- 356 1500 S - 70 hp (528 and 528/2) from 1953 to 1955

-> Porsche 356 A :
- 356 A 1300 - 44 hp (506/1) from 1956 to 1957
- 356 A 1300 S - 60 hp (589/2) from 1956 to 1957
- 356 A 1600 - 60 hp (616/1) from 1956 to 1959
- 356 A 1600 S - 75 hp (616/2) from 1956 to 1959

-> Porsche 356 B T5 :
- 356 B 1600 - 60 hp (616/1) from 1960 to 1961
- 356 B 1600 S - 75 hp (616/2) from 1960 to 1961
- 356 B 1600 Super 90 - 90 hp (616/7) from 1960 to 1961

-> Porsche 356 B T6 :
- 356 B 1600 - 60 hp (616/1) from 1962 to 1963
- 356 B 1600 S - 75 hp (616/12) from 1962 to 1963
- 356 B 1600 Super 90 - 90 hp (616/7) from 1962 to 1963

-> Porsche 356 C :
- 356 C 1600 - 75 hp (616/15) from 1964 to 1965
- 356 SC 1600 - 95 hp (616/16) from 1964 to 1965

Also suitable for Carrera versions

This drain plug was also used for the gearbox on Porsche 356 Pre-A and A.

Original assembly does not provide a seal.

Engine oil change screw for Mazda MX-5 NA

For NA all models of 1.6L and 1.8L

Comes without gasket
Original MAZDA part

For gearbox and axle draining, use part no. MX17245

This magnetic drain plug for 2CV Van retains metallic impurities.

Intended for 2cv and derivatives with 435 or 602cc engine, this magnetic drain plug improves the quality of filtration of your oil. its integrated magnet retains the metallic particles in suspension.

This magnetic drain plug for Citroën DS (09/1965-1975) retains metallic impurities.

Designed for Citroën DS models from 66 onwards, this magnetic drain plug improves the filtration quality of your oil. Its integrated magnet retains suspended metal particles.

Drain plate for Porsche 911 and930 :

-> Porsche 911 :
- 911 2.0 from 1965 to 1968
- 911 2.0 T / L / E / S from 1967 to 1969
- 911 2.2 T / E / S from 1970 to 1971
- 911 2.4 T / E / S from 1972 to 1973
- 911 2.7 Carrera RS from 1973
- 911 2.7 from 1974 to 1977
- 911 2.7 S from 1974 to 1975
- 911 Carrera 2.7 from 1974 to 1976
- 911 Carrera 3.0 from 1976 to 1977
- 911 3.0 SC from 1978 to 1983

-> Porsche 930 :
- 911 3.0 Turbo from 1975 to 1977
- 911 3.3 Turbo from 1978 to 1983

-> Porsche 914 :
-914-6 2.0 from 1970 to 1972

For VW
- Beetle, Karmann-Ghia, Type 3, Combi, 181, 08/1960->
with 1200, 1300, 1500, 1600 cc engines
- Transporter T25/T3, 05/1979 ->12/1982
with 1600 cc type CT engine.

Having trouble with the original strainer cover warping when over-torquing the M6 nuts and there by being prone to oil leaks? Or, in the case of pricey billet aluminum after market strainer covers, do you suffer from oil leakage due to cracks caused by the rear bottom end of your car impacting with the ground while mounting sloping side-walks, driveways, or ramps? In any case, you may be victim to costly engine repair work. Our solution is very simple. We have found that stainlesssteel possesses two very important traits: Strength and flexibility. Strength to the extent that even if you over-torque the screws, the plate will not warp. Flexibility to the extent that should the rear bottom section of your car impact with ground, the plate will not crack. Includes one 4mm thicksand blasted strainer cover, gasket(2), and stainless steel nuts(6). Be pro-active! Purchase one for yourself or another bug fanatic.

Oil drain screw of the crankcase for Porsche Cayman 987 :

- 987 2.7 Cayman phase 1 - 245 hp (M97.20) from 2007 to 2008
- 987 3.4 Cayman S phase 1 - 295 hp (M97.21) from 2006 to 2008
- 987 3.4 Cayman S Sport - 303 hp (M97.22) of 2008

Dimensions : M18 x 1.5

Supplied without the aluminum seal 18 x 24

This magnetic drain plug for AMI 6 and AMI 8 cars retains metallic impurities.

Designed for AMI 6 and AMI 8 cars, this magnetic drain plug improves the filtration quality of your oil. The built-in magnet retains suspended metal particles.

This magnetic drain plug for 1970 2cv Avant retains metallic impurities.

Intended for 2cv and derivatives with 435 or 602cc engine, this magnetic drain plug improves the quality of filtration of your oil. its integrated magnet retains the metallic particles in suspension.

Magnetic oil drain screw on the oil pan and on the oil thermostat for Porsche 964 :

- 964 3.6 Carrera 2 and Carrera 4 from 1989 to 1994
- 964 3.6 Carrera 2 and Carrera 4 Turbo-Look factory from 1991 to 1994
- 964 3.6 - 260 hp Carrera RS from 1992
- 964 3.3 - 320 hp Turbo from 1991 to 1992
- 965 3.6 - 360 hp Turbo from 1993 to 1994

Dimensions : M20 x 1.5

Supplied without the aluminum seal 22 x 27

Vis plug of drain of carter of oil with seal of brand FEBI for MINI II R50, R53 Sedan and R52 Convertible gasoline:

R50 Sedan:
- Cooper 1.6L 116hp from 09/2000 to 11/2006 (engine code W10B16)
- One 1.6L 90hp from 09/2000 to 11/2006 (engine code W10B16)

R52 Convertible:
- Cooper 1.6L 116hp from 11/2002 to 07/2008 (engine code W10B16)
- Cooper S manual. 1.6L 163hp from 11/2002 to 06/2004 (engine code W11B16)
- Cooper S 1.6L 170hp from 07/2004 to 07/2008 (engine code W11B16)
- Cooper S JCW 1.6L 200hp from 11/2002 to 06/2004 (engine code W11B16)
- Cooper S JCW 1.6L 210hp from 07/2004 to 07/2008 (engine code W11B16)
- One 1.6L 90hp from 01/2003 to 07/2008 (engine code W10B16)

R53 Sedan :
- Cooper S manu. 1.6L 163hp from 10/2000 to 06/2004 (engine code W11B16)
- Cooper S 1.6L 170hp from 07/2004 to 11/2006 (engine code W11B16)
- Cooper S JCW 1.6L 200hp from 11/2002 to 06/2004 (engine code W11B16)
- Cooper S JCW 1.6L 210hp from 07/2004 to 11/2006 (engine code W11B16)
- Cooper S JCW GP 1.6L 218hp from 03/2006 to 09/2006 (engine code W11B16)

Threading: M14x1.5
Head: hexagonal hexagonal
Wrench opening: 13 mm
O-ring seal included

WARNING: Not suitable for MINI II R50 Sedan One D 1.4L!

Oil drain screw for oil pan for Porsche :

-> Porsche 924 :
- 924 2.5 S - 150 hp from 1986 to 1987
- 924 2.5 S - 160 hp of 1988

-> Porsche 944 :
- 944 2.5 - 163 hp from 1982 to 1985
- 944 2.5 - 163 hp from 1985 to 1987
- 944 2.5 - 160 hp from 1988
- 944 2.5 S - 190 hp from 1987 to 1988
- 944 2.7 - 165 hp from 1989
- 944 2.5 Turbo 220 hp from 1986 to 1988
- 944 2.5 Turbo S / Cup 250 hp from 1988
- 944 2.5 Turbo 250 hp from 1989 to 1991
- 944 3.0 S2 - 211 hp from 1989 to 1991

-> Porsche 928 :
- 928 4.5 - 240 hp from 1981 to 1982
- 928 S 4.7 - 300 hp from 1980 to 1983
- 928 S2 4.7 - 310 hp from 1984 to 1986
- 928 S4 5.0 - 320 hp from 1987 to 1991
- 928 GT 5.0 - 330 hp from 1989 to 1991
- 928 GTS 5.4 - 350 hp from 1992 to 1995

-> Porsche 968 :
- 968 3.0 from 1992 to 1995
- 968 3.0 Club Sport from 1993 to 1995
- 968 3.0 Turbo S from 1993 to 1994

Dimensions : M20 x 1.5

Supplied without the aluminum seal 22 x 27

This magnetic drain plug for Peugeot 205 retains metallic impurities.
Designed for all Peugeot 205 models, this magnetic drain plug improves the filtration quality of your oil. Its integrated magnet retains suspended metal particles.

Oil drain screw of the crankcase for Porsche Boxster 987 :

- 987 2.7 Boxster phase 1 - 240 hp (M96.25) from 2005 to 2006
- 987 3.2 Boxster S phase 1 - 280 hp (M96.26) from 2005 to 2006
- 987 2.7 Boxster phase 1 - 245 hp (M97.20) from 2007 to 2008
- 987 3.4 Boxster S phase 1 - 295 hp (M97.21) from 2007 to 2008
- 987 3.4 Boxster RS 60 Spyder - 303 hp (M97.22) of 2008

Dimensions : M18 x 1.5

Supplied without the aluminum seal 18 x 24

This square recessed oil drain plug for Renault 4 - M16x1.5 - 12mm is a quality reproduction.

This oil drain plug for R4 is compatible with all models. Common to many Renault models, it can be screwed in and out thanks to a square recess.

Repairstud bolt with a double 6 / 8 mm thread for the drainage plate on Type 1 engine. Replaces the original stud bolts that have become slack, by tapping the 6 to 8 mmengine block The plate is fixed with original 6 mm nuts. Top quality, madefrom stainless steel.

For VW:
- Beetle & Karmann-Ghia: 1200->1600
- Type 3: 1500 ->1600
- Kübel 181: 1600
- Split Screen & Bay Camper: 1200 ->1600
- Transporter T3, 1600 CT

Strainer seal for Porsche 911 and 930 :

-> Porsche 911 :
- 911 2.0 from 1965 to 1968
- 911 2.0 T / L / E / S from 1967 to 1969
- 911 2.2 T / E / S from 1970 to 1971
- 911 2.4 T / E / S from 1972 to 1973
- 911 2.7 Carrera RS from 1973
- 911 2.7 from 1974 to 1977
- 911 2.7 S from 1974 to 1975
- 911 Carrera 2.7 from 1974 to 1976
- 911 Carrera 3.0 from 1976 to 1977
- 911 3.0 SC from 1978 to 1983

-> Porsche 930 :
- 911 3.0 Turbo from 1975 to 1977
- 911 3.3 Turbo from 1978 to 1983

-> Porsche 914 :
- 914-6 2.0 from 1970 to 1972