Oil drain plug

Oil strainer plate equipped with a drain screw for Porsche 911 and 930 :

-> Porsche 911 :
- 911 2.0 from 1965 to 1968
- 911 2.0 T / L / E / S from 1967 to 1969
- 911 2.2 T / E / S from 1970 to 1971
- 911 2.4 T / E / S from 1972 to 1973
- 911 2.7 Carrera RS from 1973
- 911 2.7 from 1974 to 1977
- 911 2.7 S from 1974 to 1975
- 911 Carrera 2.7 from 1974 to 1976
- 911 Carrera 3.0 from 1976 to 1977
- 911 3.0 SC from 1978 to 1983

-> Porsche 930 :
- 911 3.0 Turbo from 1975 to 1977
- 911 3.3 Turbo from 1978 to 1983

-> Porsche 914 :
- 914-6 2.0 from 1970 to 1972

For X5 E53:
- 4.4 i M62
- 4.6 is M62

Gaskets and drain strainer with central plate and screw as well as fixing nuts for VW Combi Split up to 07/1961 with cast foot engine.Suitable for 25 and 30hp.

Drain screw located on the oil pan,

For E90:
- 316 i N43, N45 & N45N
- 318 i N43, N46 & N46N
- 320 i N43, N46 & N46N
- 320 si N45

For E91:
- 318 i N43, N46 & N46N
- 320 i N43, N46 & N46N

For E92:
- 316 i N46
- 320 i N43, N46N

For E93:
- 320 i N43 & N46N

Drain plug seal for:
- MX5 NA -> only if equipped with plug MX16813
- MX5 NB and NBFL
- MX5 NC and NCFL

Dimensions 14x20 mm

This magnetic drain plug for 2cv and derivatives retains metallic impurities.

Intended for 2cv and derivatives with 435 or 602cc engine, this magnetic drain plug improves the quality of filtration of your oil. its integrated magnet retains the metallic particles in suspension.

Oil drain plug kit for Peugeot 205 XU engine
Contains drain plug and copper gasket
Thread: M16 x 1.5
For 205 GTI and 205 CTI, and all XU petrol engines
Assignments :- 1.6 GT, XS 1580cm3 89hp[lm1] (XU5M) from to 07/1992- 1.6 GT, XS 1580cm3 89hp (XU5M/Z) from 08/1992 to 07/1993- 1.6 Automatic 1580cm3 80hp (XU51C) from 08/1985 to 07/1987- 1.6 Automatic 1580cm3 80hp (XU51C) from 08/1987 to 07/1993- 1.6 Automatic catalyzed 1580cm3 89hp (XU5M/Z) from 08/1993 to 08/1994- 1.6 GTI 1580cm3 105hp (XU5J) from 03/1984 to 12/1986- 1.6 GTI 1580cm3 115hp (XU5JA) from 03/1986 to 12/1986- 1.6 GTI 1580cm3 115hp (XU5JA) from 01/1987 to 07/1992- 1.9 GTI 1905cm3 130hp (XU9JA) from 01/1987 to 07/1992- 1.9 GTI Catalyzed 1905cm3 122hp (XU9JA/Z) from 08/1992 to 12/1993- 1.9 Gentry 1905cm3 105hp (XU9J1/Z) from 08/1991 to 12/1993
205 Cabriolet :- 1.6 CTI 1580cm3 115hp (XU5JA) from 08/1985 to 07/1992- 1.9 CTI Catalyzed 1905cm3 105hp (XU9J1/Z) from 08/1991 to 12/1993

For Transporter T4 Engines 1.8L->2.8L, 09/90->
except engine TDI 2.5L

For Z4 Roadster (E85):
- 2.0 i N46

Original quality paper drain sealsSupplied with copper seals
For VW Cox all models since 1960For VW Combi Split from 1960 to 1967For VW Combi Bay Window with engine type1 1600For VW Transporter T25 with 1600 CT engines

Engine oil drain plug for Bmw 1 Series:
Bmw 1 Series F20 :
- 125i 4cyl 218hp from 07/2010 to 02/2015 (engine code n20b20a)- 125i 4cyl 218hp from 05/2014 to 06/2016 (engine code n20b20a)
Bmw 1 Series F21 :
- 125i 4cyl 218hp from 07/2010 until 02/2015 (engine code n20b20a)- 125i 4cyl 218hp from 09/2014 to 06/2016 (engine code n20b20a)

This magnetic drain plug for DYANE and Acadiane retains metallic impurities.

Intended for DYANE and Acadiane vehicles with 435 or 602cc engines, this magnetic drain plug improves the quality of filtration of your oil, while its integrated magnet retains suspended metallic particles.

FEBIoil pan plug for Peugeot 206 S16 and 206 RC
Original quality part
Copper gasket supplied
Thread: M14 x 1.25mm
Assignments :- 206 S16 - 2.0 16V 1997cm3 137cvs (EW10J4) RFR phase 1 from 08/1999 to 07/2000- 206 S16 - 2.0 16V 1997cm3 138hp (EW10J4) RFN phase 1 from 08/2000 to 07/2002- 206 S16 - 2.0 16V 1997cm3 138hp (EW10J4) RFN phase 2 from 08/2002 to 07/2004- 206 RC - 2.0 16V 1997cm3 177hp (EW10J4S) phase 2 from 01/2003 to 07/2007

Oil drain screw for oil pan for Porsche 993 :

- 993 3.6 - 272 hp Carrera et Carrera 4 from 1994 to 1995
- 993 3.6 - 285 hp Carrera et Carrera 4 from 1996 to 1998
- 993 3.6 - 285 hp Carrera S from 1997 to 1998
- 993 3.6 - 285 hp Carrera 4S from 1996 to 1998
- 993 3.8 - 300 hp Carrera RS from 1995 to 1996
- 993 3.6 - 408 hp Turbo from 1995 to 1998
- 993 3.6 - 450 hp Turbo S from 1997 to 1998
- 993 3.6 - 430 hp GT2 from 1996 to 1998

Dimensions : M20 x 1.5

Supplied without the aluminum seal 22 x 27

Seals and drain strainer with central plate and screw as well as fixing nuts for Brazilian VW Combi Split from 1957 to 1975 with cast foot engine.Suitable for 25 and 30hp.

M16 oil pan drain plug in aluminum only.
No need for a drain gasket, the seal is made at the end of the screw with the conical part.

For VW transporter T3/T25
With 1.6 and 1.7 Diesel and Turbo Diesel engines

Oil drain screw of the crankcase for Porsche 911 type 997 :
- 997 phase 1 3.6 - 325 hp (M96.05) Carrera from 2005 to 2008
- 997 phase 1 3.6 - 325 hp (M96.05) Carrera 4 from 2005 to 2008
- 997 phase 1 3.8 - 355 hp (M97.01) Carrera S from 2005 to 2008
- 997 phase 1 3.8 - 355 hp (M97.01) Carrera 4S from 2005 to 2008
- 997 phase 1 3.8 X51 - 380 hp (M97.01S) Carrera S from 2007 to 2008
- 997 phase 1 3.8 X51 - 380 hp (M97.01S) Carrera 4S from 2007 to 2008

Oil drain screw of the oil pump of the Porsche 997 3.8 and 4.0 GT3 :
- 997 3.8 GT3 - 435 hp (M97.77) from 2010 to 2011
- 997 3.8 GT3 RS - 450 hp (M97.77R) from 2010 to 2011
- 997 4.0 GT3 RS - 500 hp (M97.74) of 2012

Dimensions : 18 x 1.5

Supplied without the aluminum seal 18 x 24

Drain screw for Porsche 912 :

- 912 1.6 from 1965 to 1969

Original assembly does not provide a seal.

Magnetic drain screw for Porsche 911 type 996 with Metzger engine :

-> The oil tank and the oil pan for Porsche 996 GT3 :
- 996 phase 1 3.6 GT3 - 360 hp (M96.76) from 2000 to 2001
- 996 phase 2 3.6 GT3 - 380 hp (M96.79) from 2004 to 2005
- 996 phase 2 3.6 GT3 RS - 380 hp (M96.79) of 2004

-> The oil pan for Porsche 996 Turbo and GT2 :
- 996 3.6 Turbo - 420 hp (M96.70) from 2000 to 2005
- 996 3.6 Turbo X50 - 450 hp (M96.70) from 2001 to 2005
- 996 3.6 Turbo S - 450 hp (M96.70) of 2005
- 996 3.6 GT2 - 462 hp (M96.70SL) from 2001 to 2004
- 996 3.6 GT2 - 483 hp (M96.70SL) of 2005

Dimensions : M20 x 1.5

Supplied without the aluminum seal 22 x 27

Drain plug bolt
M14 x 1.5
Requires 1, sold individually

- For VOLKSWAGEN Bay Window 72 ->79,
With type 4 engine (1700, 1800, 2000cc)
- For VOLKSWAGEN Transporter T25 / T3,
2000cc, 1900 / 2100cc WBX engines and Diesel engines