Rigid brake hose

This brake hose kit for RENAULT 14 (01/1976-06/1983) respects the original dimensions.
This set of rigid brake hoses for RENAULT 14 is made of copper.The high quality copper hoses are the length of the original assembly and will require forming before fitting.
All circuit connections via M10x1 end fittings.This set includes:- 2 front pipes, left and right- 2 right and left rear pipes- 2 right and left rear intermediate hoses- central hose for sedan
Caution: if your vehicle has been modified, check the diameter of the wheel cylinder and the wrench required to tighten the brake hose ends.Use only DOT 4 or DOT 5 brake fluid.

This brake hose kit for RENAULT 12 L and TL (09/1969-09/1979) complies with the original dimensions.
This set of rigid brake hoses for RENAULT 12 L and TL is made of copper.The high quality copper hoses are the length of the original assembly and will require shaping before fitting.
All circuit connections via 3/8" 24UNF nipples.This set includes:- 2 front pipes, left and right- 2 rear hoses, left and right- central hose for sedan
Caution: if your vehicle has been modified, check the diameter of the wheel cylinder and the wrench required to tighten the brake hose nipples.Use only DOT 4 or DOT 5 brake fluid.

This brake hose kit for RENAULT 12 (09/1969-09/1979) respects the original dimensions.
This set of rigid brake hoses for RENAULT 12 is made of copper.The high quality copper hoses are the length of the original assembly and will require forming before fitting.
All circuit connections via 3/8" 24UNF nipples.This set includes:- 2 front pipes, left and right- 2 rear hoses, left and right- central hose for sedan- central hose for station wagon
Please note that your vehicle may have been modified, so check the diameter of the wheel cylinder and the wrench required to tighten the brake hose ends.Use only DOT 4 or DOT 5 brake fluid.

This set of rigid brake hoses for RENAULT 18 with LUCAS GIRLING mounting is made of copper.The high quality copper hoses are the length of the original assembly and will require forming before fitting.
All circuit connections via 3/8" 24UNF fittings.This set includes:- 2 front pipes, left and right- 2 rear hoses, left and right- central hose for sedan
Caution: if your vehicle has been modified, check the diameter of the wheel cylinder and the wrench required to tighten the brake hose nipples.Use only DOT 4 or DOT 5 brake fluid.

Rigid copper brake hose 109 cm for 3.5 mm diameter
- End fittings Male / Male- End fitting type: M8 x 125- Thread length: 20 mm- Internal diameter of ferrules: 5 mm
Made in Europe, our copper pipes are more malleable than steel and can be formed by hand.
In addition to its flexibility, copper is highly resistant to pressure, corrosion and temperature.Each pipe is fitted with steel fittings adapted to your vehicle, and is assembled using an 8mm wrench.

Complete set of rigid copper brake lines for models with front discs and rear drums.

For VW Beetle 1302 & 1303 S
with front disc brakes.
Years: 08/1970 ->01/1980
Chassis No. 111 2000 001 ->133 3200 000.

This tailor-made brake line kit will allow you to restore the brake system of your VW Beetle.

Made in Europe, these copper pipes, more malleable than steel pipes, can be formed by hand.

In addition to its flexibility, copper has significant resistance to pressure, corrosion and temperatures.
Each pipe is crimped with steel fittings suitable for your vehicle and is fitted using an 11mm wrench.

Single circuit

Complete set of copper rigid brake hoses for double circuit and independent rear suspension (IRS). Superior quality.

For VW Beetle 1500 Automatic
& Karmann-Ghia type 14 Automatic
Years: from 08/1966->
From Chassis no.:
- Saloon: 117 000 001->
- Cabriolet: 157 000 001->
- Karmann-Ghia: 147 000 001->
+ Buggy with cardan chassis.

Complete rigid copper brake hose kit for single circuit.

For VW Oval Split Screen Beetle
& Karmann-Ghia type 14
Years: until ->07/1957
Up to chassis no. -> 1 600 439.

This front right brake hose for 2cvs with front drum brakes is true to the original.

This rigid brake hose made of copper with a 3.5mm diameter needs shaping.
It connects the tee on top of the gearbox to the front right wheel cylinder with 8mm fitted nipples.
This hose is compatible with all front drum brake models from June 1970.

This front brake hose from the master cylinder to the tee for 2cvs with front drum brakes is true to the original.

This rigid copper brake hose of 3.5mm diameter needs shaping.
It connects the tee on top of the gearbox to the master cylinder by means of 8 mm fitted nipples.
This hose is compatible with all front drum brake models from June 1970.

This left rear brake hose for 2CV needs shaping

This rigid brake hose made of copper with a 3.5mm diameter needs shaping.
It connects the rear tee to the left rear wheel cylinder with an 8mm keyed connector.
This hose is compatible with all front drum and disc brake models from June 1970.

This intermediate brake pipe for 2cv is true to the original.

This undercarriage rigid brake hose made of copper with a 3.5mm diameter needs shaping.
It connects the master cylinder to the rear splitter by means of 8 mm keyed connectors.
This hose is compatible with all models with front drum or disc brakes from June 1970 onwards except Acadianes.

This intermediate brake hose from connector to the tee for 2cvs is true to the original.

This rigid brake hose made of copper with a 3.5mm diameter needs shaping.
It connects the central connection under the body to the timing belt tee towards the 2 rear wheels by means of 8 mm spanner fitted nipples.
This hose is compatible with all models with disc or drum brakes from June 1970.

This complete set of brake hoses for 2cvs with drum brakes - STAINLESS STEEL is higher quality than the original.

This set of rigid brake hoses is made of stainless steel. It is compatible with all models with a front drum brake system from June 1970. Its high quality manufacturing and the preforming of the different hoses make them highly reliable with durability superior to the majority of the other elements in the car.
All connection ends to the master cylinder and wheel cylinder can be fitted with an 8 mm spanner.

This package includes:
- the 2 front drum connection pipes
- the 2 spiral hoses connecting the rear drums
- the intermediate spiral pipe from the master cylinder to the front
- the intermediate pipe from the master cylinder to the rear

Watch out!!! Your vehicle may have been modified, so check the diameter of the wheel cylinder and the spanner you need to tighten the brake hose ends.
Use only DOT4 or DOT5 brake fluid.
LHM fluid is very corrosive to parts not intended for its use, and the wrong brake fluid could seriously damage your braking system.

This complete brake hose kit for 2cvs with front drum brakes is higher quality than the original.

This set of rigid brake hoses is made of copper. It is compatible with all models with a front drum brake system from June 1970.
The high quality copper hoses are the exact length of the original equipment and will require shaping before fitting.

All circuit connections through connection ends to the master cylinder and wheel cylinder can be fitted with an 8 mm spanner.

This package includes:
- the 2 front drum connection pipes
- The 2 connection pipes for the rear drums
- The intermediate pipe from the master cylinder to the front
- the intermediate pipe from the master cylinder to the rear
- The hose from the sill connection to the rear tee
- 20 barrel seals 3.5mm for DOT4 or DOT5 liquids

Watch out!!! Your vehicle may have been modified, so check the diameter of the wheel cylinder and the spanner you need to tighten the brake hose ends.
Use only DOT4 or DOT5 brake fluid.
LHM fluid is very corrosive to parts not intended for its use, and the wrong brake fluid could seriously damage your braking system.

This front brake hose from master cylinder to Tee for 2CV Van (01/1972-03/1978) - drums is true to original.

This rigid hose for 2CV made of 3.5mm diameter copper is to form.
It connects the master cylinder to the Tee on top of the gearbox with a 8 wrench.
This hose is compatible with all models with front drum brakes from June 1970.

This left rear brake hose for 2CV Van (01/1972-03/1978)is to be formed.

This rigid brake hose for 2CV in 3.5mm diameter copper is to be formed.
It connects the rear tee to the left rear wheel cylinder with a 8 wrench.
This hose is compatible with all front drum as well as disc brake models from June 1970.

Beware! Use the proper barrel seals for DOT4 and DOT5 or LHM brake fluid. LHM (green) fluid is very corrosive to parts not intended for its use, using the wrong seals or brake fluid could severely damage your brake system.

This intermediate brake hose for 2cv van (01/1972-03/1978)is to be formed.

This rigid brake hose for 2CV made of 3.5mm diameter copper is to be formed.
It connects the master cylinder to the rear tee with a 8 wrench.
This hose is compatible with all models with both drum and disc front brakes starting from June 1970.

Warning!!! Use the proper barrel seals for DOT4 and DOT5 or LHM brake fluid. LHM (green) fluid is very corrosive to parts not intended for its use, using the wrong seals or brake fluid could severely damage your brake system.

This right rear brake hose for 2CV Van (06/1970-03/1978)is to be formed.

This right rear rigid brake hose for 2CV made of 3.5mm diameter copper is to be formed.
It connects the rear tee to the wheel cylinder with a 8 wrench.
This hose is compatible with 2CV vans:
- 2CV AZU 250 AZU-B-AK-AP (01/1972-03/1978)
- 2CV AKS/AK400 (06/1970-03/1978)

These models were equipped with front drum brakes as standard. It may have since received a Disc assembly. check the system and the nature of the brake fluid.

Caution!!! Use the appropriate barrel seals for DOT4 and DOT5 or LHM brake fluid. LHM (green) fluid is very corrosive to parts not intended for its use, using the wrong gaskets or brake fluid could severely damage your brake system.