Rigid brake hose

For VW Corrado G60 and 2000 16S

Rigid rear brake hose on master cylinder for Porsche 914 from 1970 to 1976 :
- 914-4 1.7 - 80 hp (022-W) from 1970 to 1973- 914-4 1.7 - 80 hp (022-EA) from 1972 to 1973- 914-4 1.7 - 72 hp (022-EB) from 1972 to 1973- 914-4 1.8 - 85 hp (021-AN) from 1974 to 1976- 914-4 1.8 - 76 hp (022-EC) from 1974 to 1976- 914-4 2.0 - 95 hp (039-GA) from 1973 to 1974- 914-4 2.0 - 100 hp (039-GB) from 1973 to 1976- 914-4 2.0 - 88 hp (039-GC) from 1975 to 1976- 914-6 2.0 - 110 hp (901.36/37/38/39) from 1970 to 1972

Complete set of rigid PVF steel brake hoses.
Complete lines for models with ABS and rear brake drums .

For VW Golf 2 1.0-1.8 Petrol and Diesel from 08/1989 to 07/1992.

This customized brake line kit will enable you to restore the braking system of your VW Golf 2.

This brake hose kit for Citroën CX (08/1974-05/1991) - Estate is of superior quality to the original.
This set of rigid brake hoses is made of copper. It is compatible with all CX station wagon models.The high-quality copper hoses are the exact length of the original assembly and will require forming before fitting.
All circuit connections to the master cylinder and wheel cylinders are made using a size 8 wrench.
This assembly includes- hoses from the front distributor to the right and left front calipers- connection hose to rear distributor- intermediate hose from master cylinder to front distributor- return hose from front distributor to master cylinder- intermediate hose from master cylinder to rear distributor- hoses from rear distributor to right and left rear discs
Caution: if your vehicle has been modified, check the diameter of the wheel cylinder and the wrench required to tighten the brake hose ends.Use only LHM brake fluid.LHM fluid is highly corrosive to parts not intended for its use, and the wrong brake fluid can seriously damage your braking system.

This brake hose kit for Meharis with disc brakes is higher quality than the original.

This set of rigid brake hoses is made of copper. It is compatible with all models with a front disc brake system from June 1978.
The high quality copper hoses are the exact length of the original equipment and will require shaping before fitting.

All circuit connections through connection ends to the master cylinder and wheel cylinder can be fitted with an 8 mm spanner.

This package includes:
- the connecting pipes for the front callipers
- the 2 connection pipes for the rear drums
- the intermediate pipe from the master cylinder to the front
- the intermediate pipe from the master cylinder to the rear
- 16 x 3.5 mm barrel seals for "green" LHM brake fluid

Watch out!!! Your vehicle may have been modified, so check the diameter of the wheel cylinder and the spanner you need to tighten the brake hose ends.
Use only LHM brake fluid.
LHM fluid is very corrosive to parts not intended for its use, and the wrong brake fluid could seriously damage your braking system.

This right front brake hose for Mehari (01/1972-07/1976) - drums is true to the original.

This rigid hose for Mehari made of 3.5mm diameter copper is to be formed.
It connects the Tee on top of the box to the left front wheel cylinder with a 8 wrench.
This hose is compatible with all single brake circuit drum front brake models from January 1972.

Steel brake hose kit for Mercedes Pagode

For Mercedes SL W113 Pagode :
- 250 SL (113.043) from 12/1966 to 01/1968
- 280 SL (113.044) from 01/1968 to 03/1971

This complete steel brake hose kit contains all the rigid brake hoses required for a complete brake line rebuild.

Complete set of rigid copper brake hoses.
Complete hose assemblies provided allowing the entire brake system to be redone,

For VW Caddy from 1983 to 1992 :
- All models

This kit of custom brake lines will allow you to restore the brake circuit of your VW Caddy

Of European manufacture, these copper pipes, more malleable than those in steel, can be formed by hand.

In addition to its flexibility, copper has significant resistance to pressure, corrosion, and temperature.
Each hose is crimped with steel fittings appropriate for your vehicle and is mounted with an 11mm key.

This brake hose kit for Peugeot 504 Break (09/1978-09/1987) respects the original dimensions.
This set of rigid brake hoses for Peugeot 504 Break is made of copper.The high quality copper hoses are the length of the original assembly and will require forming before fitting.
All circuit connections via 3/8" 24 UNF nipples.This set includes:- 2 front pipes, left and right- 2 rear right and left hoses- 2 right and left front intermediate hoses
Caution: if your vehicle has been modified, check the diameter of the wheel cylinder and the wrench required to tighten the brake hose nipples.Use only DOT 4 or DOT 5 brake fluid.

Complete kit of rigid metal brake tubing.
Complete tubing for models without brake booster

For VW Combi Bay Window T2A, 08/1969 ->07/1970
Models without a brake booster.
Chassis: n°210 2000 001 ->210 2300 000.

This set of brake hoses for Renault 4 (10/1965-07/1986) - left-hand regulator complies with the original dimensions.

This set of rigid brake hoses for R4 is made of copper. It is compatible with all R4 sedan and van models with the left-hand brake regulator.
The high-grade copper hoses are the length of the original assembly and will require forming before fitting.

All circuit connections via 3/8"-24 UNF nipples, 21mm long.

This set includes:
- the 2 rear drum connection hoses
- connection hose from rear regulator to right rear
- connection hose from rear regulator to left rear
- intermediate hose from master cylinder to front right
- intermediate hose from master cylinder to front left
- intermediate hose from master cylinder to rear distributor

Caution: if your vehicle has been modified, check the wheel cylinder diameter and the wrench required to tighten the brake hose ends.
Use only DOT 4 or DOT 5 brake fluid.

This rigid brake tube kit for Citroën traction 11 BL up to 07/1952 includes all the rigid tubes needed to replace all those fitted to your traction vehicle.
Over time, original brake tubes oxidize, crack or become blocked, compromising the safety of your braking system. Irregular braking or leaks can be signs that the system needs replacing.
This rigid hose kit is essential to restore your Traction to a state-of-the-art condition and drive with peace of mind.
Compatible models:- Traction Avant 11BL Berline 4 portes 11CV "légère", type 11BL de 02/1937 à 02/1939, Moteur, type 11cv 1911cc (46cv)- Traction Avant 11BL Faux-Cabriolet (Coupé) 11HP "light", type 11BL from 02/1937 to 02/1938, Engine, type 11hp 1911cc (46hp)- Traction Avant 11BL Roadster (Cabriolet) 11HP "light", type 11BL from 02/1937 to 02/1939, Engine, type 11hp 1911cc (46hp)- Traction Avant 11BL Berline 4 portes 11 "légère" "Performance", type 11BL de 02/1939 à 1941, Moteur, type 11cv perfo 1911cc (56cv)- Traction Avant 11BL Berline 4 portes 11 "légère" "Performance", type 11BL de 02/1945 à 07/1952, Moteur, type 11cv perfo 1911cc (56cv)

Rigid brake line kit for 1968 Porsche 911 F type :
- 911 2.0 T / L / S from 1968
This kit of 9 rigid hoses is suitable for vehicles with a single brake circuit and no brake booster.

Rigid brake line kit for Porsche 356 BT6 from 1962 to 1963 :
- 356 BT6 from 1962 to 1963
The kit contains 8 rigid brake hoses and is suitable for single-circuit vehicles without brake booster.

This brake hose kit for Citroën BX (09/1982-07/1989) - without ABS is of superior quality to the original.
This set of rigid brake hoses is made of copper. It is compatible with all models from launch to the introduction of ABS in July 1989.The high-grade copper hoses are the exact length of the original assembly and will require shaping before fitting.
All circuit connections to the master cylinder and wheel cylinders are made using a size 8 wrench.
This assembly includes- hoses from the front distributor to the right and left front calipers- the (long) hose connecting to the rear distributor- intermediate hose from master cylinder to front distributor- intermediate hose from master cylinder to rear distributor- rear drum hoses
Caution: if your vehicle has been modified, check the wheel cylinder diameter and the wrench required to tighten the brake hose ends.Use only LHM brake fluid.LHM fluid is highly corrosive to parts not intended for its use, and the wrong brake fluid can seriously damage your braking system.

This set of rigid brake hoses for RENAULT 20 is made of copper.The high quality copper hoses are the length of the original assembly and will require forming before fitting.
All circuit connections via M10x1 end fittings.This set includes:- 2 front pipes, left and right- 2 right and left rear pipes- 2 outer right and left rear pipes- one standard and one extended central hose
Caution: if your vehicle has been modified, check the diameter of the wheel cylinder and the wrench required to tighten the brake hose ends.Use only DOT 4 or DOT 5 brake fluid.

Complete kit of rigid copper brake tubing.
Complete tubing for models without a brake booster

For VW Combi Bay Window T2A, 08/1970 ->07/1971
Models without a brake booster.
Chassis n°211 2000 001 ->211 2300 000.

Complete kit of rigid copper brake tubing.
Complete tubing for models without a brake booster

For VW Combi Bay Window T2B,
Models without a brake booster.
Years: 08/1972 ->11/1972

Complete set of copper rigid brake hoses for BMW 3 Series E36 Touring and Sedan with ABS system:

- 320i

This set of custom brake hoses will allow you to restorethebrake systemof your E36.

Of European manufacture, these copper hoses, more malleable than steel ones, can be formed by hand.

In addition to its flexibility, copper has significant pressure, corrosion and temperature resistance.

Each hose is crimped with steel fittings specifically tailored to your vehicle and is mounted with an 11mm wrench.

Rigid front right-hand brake hose on master cylinder for:
- 356 A, B and C 1.5 to 2.0 from 01/1955 to 12/1965