Rigid brake hose

Rigid copper brake hose 360 cm for 4.75 mm diameter
- End fittings Male / Male- End fitting type: M10x100- Thread length: 17 mm- Internal diameter of ferrules: 5 mm
Made in Europe, our copper pipes are more malleable than steel and can be formed by hand.
In addition to its flexibility, copper is highly resistant to pressure, corrosion and temperature.Each pipe is fitted with steel fittings adapted to your vehicle, and is assembled using an 11mm wrench.

This intermediate brake hose for 2cvs - STAINLESS STEEL is higher quality than the original.

This pipe from the master cylinder to the rear is made of stainless steel. It is compatible with all models with disc brake systems.
Its high quality manufacturing and the preforming of the different hoses make them highly reliable with durability superior to the majority of the other elements in the car.
You connect it to the master cylinder and wheel cylinder with an 8mm spanner.

Watch out!!! Your vehicle may have been modified, so check the diameter of the wheel cylinder and the spanner you need to tighten the brake hose ends.
Use only LHM brake fluid.
LHM fluid is very corrosive to parts not intended for its use, and the wrong brake fluid could seriously damage your braking system.

This front brake hose from the master cylinder to the tee for 2cvs with front disc brakes is true to the original.

This copper rigid brake hose with 3.5mm diameter needs shaping.
It connects the tee on top of the box to the master cylinder.
This hose is compatible with all models with front disc brakes from June 1978.

Kit of rigid copper brake hoses for:
- 911 from 1969 to 1977
- 912 from 1969 to 1977

This rear and intermediate brake hose kit for Meharis-STAINLESS STEEL-3.5mm-for 8mm spanners is higher quality than the original.

This set of rigid brake hoses is made of stainless steel. It is compatible with all models with a front disc brake system.
Its high quality manufacturing and the preforming of the different rear hoses make them highly reliable with durability superior to the majority of the other elements in the car.
Use an 8mm spanner to fit the connector ends to the master cylinder and wheel cylinders.

This package includes:
- the 2 spiral hoses connecting the rear drums
- the intermediate pipe from the master cylinder to the rear

Watch out!!! Your vehicle may have been modified, so check the diameter of the wheel cylinder and the spanner you need to tighten the brake hose ends.
Use only LHM brake fluid.
LHM fluid is very corrosive to parts not designed for its use, and the wrong brake fluid could seriously damage your braking system.

This rear brake hose kit for Meharis - STAINLESS STEEL-3.5mm-for 8mm spanners is higher quality than the original.

This pair of rear spiral brake hoses is made of stainless steel. It is compatible with all models from July 1977.
Its high quality manufacturing and the preforming of the different rear hoses make them highly reliable with durability superior to the majority of the other elements in the car.
Use an 8mm spanner to fit the connector ends to the central fitting and wheel cylinders.

Watch out!!! Your vehicle may have been modified, so check the diameter of the wheel cylinder and the spanner you need to tighten the brake hose ends.

Watch out!!! Check the colour of your brake fluid and barrel gaskets, use the right gaskets for your brake fluid:
- with red dots for DOT4 or DOT5 liquid.
- green dot for the LHM

LHM fluid is very corrosive to parts not designed for its use, and the wrong brake fluid could seriously damage your braking system.

This right rear brake hose for 2CV Van (06/1970-03/1978)is to be formed.

This right rear rigid brake hose for 2CV made of 3.5mm diameter copper is to be formed.
It connects the rear tee to the wheel cylinder with a 8 wrench.
This hose is compatible with 2CV vans:
- 2CV AZU 250 AZU-B-AK-AP (01/1972-03/1978)
- 2CV AKS/AK400 (06/1970-03/1978)

These models were equipped with front drum brakes as standard. It may have since received a Disc assembly. check the system and the nature of the brake fluid.

Caution!!! Use the appropriate barrel seals for DOT4 and DOT5 or LHM brake fluid. LHM (green) fluid is very corrosive to parts not intended for its use, using the wrong gaskets or brake fluid could severely damage your brake system.

Complete set of PVF steel rigid brake hoses.
Complete lines provided for models with Servo brake and pressure regulator without ABS.

For golf 2 1.0-1.8 Gasoline and Diesel year 08/83-12/92

This kit of custom brake lines will allow you to restore the braking system of your VW Golf 2.

Rigid copper brake hose 355 cm for 4.75 mm diameter
- Spigots Male / Male- Nipple type: 3/8" 24UNF- Thread length: 21 mm- Internal diameter of ferrules: 5 mm
Made in Europe, our copper pipes are more malleable than steel and can be formed by hand.
In addition to its flexibility, copper is highly resistant to pressure, corrosion and temperature.Each pipe is fitted with steel fittings adapted to your vehicle, and is assembled using an 11mm wrench.

Complete set of rigid PVF steel brake hoses.
Complete lines for models without ABS, with brake servo and without pressure regulator.

For Volkswagen Golf 1 from 04/1974 to 07/1979

This custom-made brake line kit will enable you to restore the braking system of your Golf 1.

This rear and intermediate brake hose kit for 2cvs - STAINLESS STEEL is higher quality than the original.

This set of rigid brake hoses is made of stainless steel. It is compatible with all models with a front disc brake system.
Its high quality manufacturing and the preforming of the different rear hoses make them highly reliable with durability superior to the majority of the other elements in the car.
All connection ends to the master cylinder and wheel cylinder can be fitted with an 8 mm spanner.

This package includes:
- the 2 spiral hoses connecting the rear drums
- the intermediate pipe from the master cylinder to the rear

Watch out!!! Your vehicle may have been modified, so check the diameter of the wheel cylinder and the spanner you need to tighten the brake hose ends.
Use only LHM brake fluid.
LHM fluid is very corrosive to parts not intended for its use, and the wrong brake fluid could seriously damage your braking system.

This front brake hose for 2cv (02/1970-06/1970) - 4.5mm is of superior quality to the original.
This 4.5mm front brake hose for 2CV is compatible with assemblies requiring a 9 key. It was only used on 2CV sedans for 6 months at the launch of the 2CV4 and 2CV6. It succeeded the intermediate assembly using banjos for the front brakes, and was replaced in June 1970 by a complete system in 3.5mm and wrench 8. Caution: your vehicle may have been modified, so check the diameter of the wheel cylinder and the wrench required to tighten the brake hose ends.
The fitting is a 9 thread with a 10 wrench opening.


Use only DOT4 or DOT5 brake fluid.LHM fluid is highly corrosive to parts not intended for its use, and the wrong brake fluid can seriously damage your braking system.

This brake hose from the master cylinder to the front for 2cvs - STAINLESS STEEL is of high quality.

This rigid hose connects the master cylinder to the brake callipers and is compatible with all disc brake models.
Its 3.5mm diameter stainless steel tube is higher quality than the original.

This rear arm brake hose for 2cv Van (03/1963-01/1972) - 4.5mm is a higher quality than the original.

This rear brake hose on arm for 2CV in 4.5mm is compatible with mounts requiring a 9 wrench and mounts at the end of the rear hose. It was only used on the 2CV sedan on the Hybrid front banjo mounting and a few months at the launch of the 2CV4 and 2CV6. It was replaced in June 1970 by a complete system in 3.5mm and key of 8.

Caution!!! your vehicle may have been modified, check the diameter of the wheel cylinder and the key needed to tighten the brake hose ends.


Use only a DOT4 or DOT5 brake fluid.
The LHM fluid is very corrosive to parts that are not intended for its use, a bad brake fluid could severely damage your braking system.

This brake hose between front callipers for DYANEs and Acadianes - STAINLESS STEEL - 3.5mm with 8mm spanner fitting is high quality.

This rigid brake calliper connection hose is compatible with all disc brake models.
Its 3.5mm diameter stainless steel tube is higher quality than the original.

This front right brake hose for 2cvs with front drum brakes is true to the original.

This rigid brake hose made of copper with a 3.5mm diameter needs shaping.
It connects the tee on top of the gearbox to the front right wheel cylinder with 8mm fitted nipples.
This hose is compatible with all front drum brake models from June 1970.

This right rear brake hose for 2CV needs shaping

This rigid brake hose made of copper with a 3.5mm diameter needs shaping.
It connects the rear tee to the right rear wheel cylinder with 8mm keyed connectors.
This hose is compatible with all front drum and disc brake models from June 1970.

Single circuit

This rear brake hose Intermediate for AMI6 and AMI8 (12/1963-07/1969) - 4.5mm is a higher quality than the original.

This intermediate brake hose for AMI6 and AMI8 in 4.5mm is compatible with assemblies requiring a 10 wrench.It was replaced as of June 1970 by a complete system in 3.5mm and 8 wrench.Caution!!! your vehicle may have been modified, check the wheel cylinder diameter and wrench needed to tighten the brake hose ends.


Use only DOT4 or DOT5 brake fluid.
LHM fluid is very corrosive to parts not intended for its use, the wrong brake fluid could severely damage your brake system.

This brake hose kit for RENAULT 5 (09/1975-12/1984) respects the original dimensions.
This set of rigid brake hoses for RENAULT 5 is made of copper.The high quality copper hoses are the length of the original assembly and will require forming before fitting.
All circuit connections via 3/8" 24 UNF nipples.This set includes:- 2 front pipes, left and right- 2 rear right and left hoses- 2 outer right and left rear pipes- 2 center hoses, right and left
Caution: if your vehicle has been modified, check the diameter of the wheel cylinder and the wrench required to tighten the brake hose nipples.Use only DOT 4 or DOT 5 brake fluid.