Rigid brake hose

This set of rigid brake hoses for RENAULT 16 is made of copper.The high quality copper hoses are the length of the original assembly and will require forming before fitting.
All circuit connections via 3/8" 24UNF nipples.This set includes:- 2 front pipes, left and right- 2 right and left rear pipes- 2 right and left rear intermediate hoses- central hose for sedan
Caution: if your vehicle has been modified, check the diameter of the wheel cylinder and the wrench required to tighten the brake hose ends.Use only DOT 4 or DOT 5 brake fluid.

83 cm rigid copper brake hose for 3.5 mm diameter
- End fittings Male / Male- End fitting type: M8 x 125- Thread length: 20 mm- Internal diameter of ferrules: 5 mm
Made in Europe, our copper pipes are more malleable than steel and can be formed by hand.
In addition to its flexibility, copper is highly resistant to pressure, corrosion and temperature.Each pipe is fitted with steel fittings adapted to your vehicle, and is assembled using an 8mm wrench.

Rigid copper brake hose 36 cm for 3.5 mm diameter
- Male / Male ferrules- End fitting type: M8 x 125- Thread length: 20 mm- Internal diameter of ferrules: 5 mm
Made in Europe, our copper pipes are more malleable than steel and can be formed by hand.
In addition to its flexibility, copper is highly resistant to pressure, corrosion and temperature.Each pipe is fitted with steel fittings adapted to your vehicle, and is assembled using an 8mm wrench.

Rigid copper brake hose 70 cm for 4.75 mm diameter
- Male / Male ferrules- Nipple type: 7/16" 20UNF- Thread length: 21.5 mm- Internal diameter of ferrules: 5 mm
Made in Europe, our copper pipes are more malleable than steel and can be formed by hand.
In addition to its flexibility, copper is highly resistant to pressure, corrosion and temperature.Each pipe is fitted with steel fittings adapted to your vehicle, and is assembled using a 12mm wrench.

Flexible de sortie de réservoir de frein pour VOLKSWAGEN Transporter T4 de 1999 à 2003 pour véhicule avec programme électronique de stabilité ESP et depuis châssis n°70-Y-027264
Longueur : 80mm

Rigid brake line kit for Porsche 911 type F from 1969 to 1971 :
- 911 2.0 T / E / S from 1969- 911 2.2 T / E / S from 1970 to 1971
The kit contains 10 rigid brake hoses and is suitable for vehicles with dual brake circuits and without brake booster.

Rigid copper brake hose 196 cm for 3.5 mm diameter
- End fittings Male / Male- End fitting type: M8 x 125- Thread length: 20 mm- Internal diameter of ferrules: 5 mm
Made in Europe, our copper pipes are more malleable than steel and can be formed by hand.
In addition to its flexibility, copper is highly resistant to pressure, corrosion and temperature.Each pipe is fitted with steel fittings adapted to your vehicle, and is assembled using an 8mm wrench.

Rigid copper brake hose 180 cm for 3.5 mm diameter
- End fittings Male / Male- End fitting type: M8 x 125- Thread length: 20 mm- Internal diameter of ferrules: 5 mm
Made in Europe, our copper pipes are more malleable than steel and can be formed by hand.
In addition to its flexibility, copper is highly resistant to pressure, corrosion and temperature.Each pipe is fitted with steel fittings adapted to your vehicle, and is assembled using an 8mm wrench.

Rigid copper brake hose 63 cm for 3.5 mm diameter
- Male / Male ferrules- End fitting type: M8 x 125- Thread length: 20 mm- Internal diameter of ferrules: 5 mm
Made in Europe, our copper pipes are more malleable than steel and can be formed by hand.
In addition to its flexibility, copper is highly resistant to pressure, corrosion and temperature.Each pipe is fitted with steel fittings adapted to your vehicle, and is assembled using an 8mm wrench.

This brake hose kit for Citroën BX (07/1989-07/1994) - with ABS is of superior quality to the original.
This set of rigid brake hoses is made of copper. It is compatible with all models equipped with the ABS system introduced in July 1989.The high-grade copper hoses are the exact length of the original assembly and will require shaping before fitting.
All circuit connections to the master cylinder and wheel cylinders are made using an 8 or 10mm wrench if the hose is 4.5mm.
This assembly includes- hoses from the ABS coupling to the right and left front caliper hoses (4.5mm)- brake pressure regulator hose to ABS coupling (3.5mm)- brake pressure regulator hose to rear manifold (3.5mm)- right rear brake hose (3.5mm)- left rear brake hose (3.5mm)- ABS coupling hose to rear brakes (4.5mm)- ABS coupling to ABS block (3.5mm)- hose from brake pressure regulator to ABS coupling (3.5mm)- 4 hoses from ABS block to ABS coupling (4.5mm)
Caution: if your vehicle has been modified, check the diameter of the wheel cylinder and the wrench required to tighten the brake hose ends.Use only LHM brake fluid.LHM fluid is highly corrosive to parts not intended for its use, and the wrong brake fluid can seriously damage your braking system.

This brake hose kit for Citroën CX (08/1974-05/1989) - Sedan is higher quality than the original.
This set of rigid brake hoses is made of copper. It is compatible with all CX Sedan models.The high-quality copper hoses are the exact length of the original assembly and will require forming before fitting.
All circuit connections to the master cylinder and wheel cylinders are made using a size 8 wrench.
This assembly includes- hoses from the front distributor to the right and left front calipers- connection hose to rear distributor- intermediate hose from master cylinder to front distributor- return hose from front distributor to master cylinder- intermediate hose from master cylinder to rear distributor- hoses from rear distributor to right and left rear discs
Caution: if your vehicle has been modified, check the diameter of the wheel cylinder and the wrench required to tighten the brake hose ends.Use only LHM brake fluid.LHM fluid is highly corrosive to parts not intended for its use, and the wrong brake fluid can seriously damage your braking system.

Rigid brake line kit for Porsche 356 BT6 from 1962 to 1963 :
- 356 BT6 from 1962 to 1963
The kit contains 8 rigid brake hoses and is suitable for single-circuit vehicles without brake booster.

Complete kit of rigid metal brake tubing.
Complete tubing for models without brake booster

For VW Combi Bay Window T2A, 08/1969 ->07/1970
Models without a brake booster.
Chassis: n°210 2000 001 ->210 2300 000.

Steel brake hose kit for Mercedes Pagode

For Mercedes SL W113 Pagoda :
- 230 SL (113.042) from 07/1963 to 07/1965

This complete steel brake hose kit contains all the custom-made rigid brake hoses required for a complete brake line rebuild.

Complete set of PVF steel rigid brake hoses.
Complete lines provided for models with ABS.

For Golf 2 1.0-1.8 Gasoline and Diesel from 08/88 to 07/89

This kit of custom brake lines will allow you to restore the braking system of your VW Golf 2.

Rigid rear brake hose on master cylinder for Porsche 914 from 1970 to 1976 :
- 914-4 1.7 - 80 hp (022-W) from 1970 to 1973- 914-4 1.7 - 80 hp (022-EA) from 1972 to 1973- 914-4 1.7 - 72 hp (022-EB) from 1972 to 1973- 914-4 1.8 - 85 hp (021-AN) from 1974 to 1976- 914-4 1.8 - 76 hp (022-EC) from 1974 to 1976- 914-4 2.0 - 95 hp (039-GA) from 1973 to 1974- 914-4 2.0 - 100 hp (039-GB) from 1973 to 1976- 914-4 2.0 - 88 hp (039-GC) from 1975 to 1976- 914-6 2.0 - 110 hp (901.36/37/38/39) from 1970 to 1972

Complete set of rigid PVF steel brake hoses.
Complete lines for models with ABS and rear brake drums .

For VW Golf 2 1.0-1.8 Petrol and Diesel from 08/1989 to 07/1992.

This customized brake line kit will enable you to restore the braking system of your VW Golf 2.

Steel brake hose kit for Mercedes Pagode

For Mercedes SL W113 Pagode :
- 250 SL (113.043) from 12/1966 to 01/1968
- 280 SL (113.044) from 01/1968 to 03/1971

This complete steel brake hose kit contains all the rigid brake hoses required for a complete brake line rebuild.

Brake line kit for Porsche 911 type G from 1974 to 1976 :
- 911 2.7 from 1974 to 1976- 911 S 2.7 from 1974 to 1976- 911 Carrera 2.7 from 1974 to 1976- 911 Carrera 3.0 from 1976
This set of 10 rigid hoses is suitable for vehicles with dual brake circuits and no brake booster.

This brake hose kit for Citroën BX (09/1982-07/1989) - without ABS is of superior quality to the original.
This set of rigid brake hoses is made of copper. It is compatible with all models from launch to the introduction of ABS in July 1989.The high-grade copper hoses are the exact length of the original assembly and will require shaping before fitting.
All circuit connections to the master cylinder and wheel cylinders are made using a size 8 wrench.
This assembly includes- hoses from the front distributor to the right and left front calipers- the (long) hose connecting to the rear distributor- intermediate hose from master cylinder to front distributor- intermediate hose from master cylinder to rear distributor- rear drum hoses
Caution: if your vehicle has been modified, check the wheel cylinder diameter and the wrench required to tighten the brake hose ends.Use only LHM brake fluid.LHM fluid is highly corrosive to parts not intended for its use, and the wrong brake fluid can seriously damage your braking system.