Rigid brake hose

Rigid copper brake hose 70 cm for 4.75 mm diameter
- Male / Male ferrules- Nipple type: 7/16" 20UNF- Thread length: 21.5 mm- Internal diameter of ferrules: 5 mm
Made in Europe, our copper pipes are more malleable than steel and can be formed by hand.
In addition to its flexibility, copper is highly resistant to pressure, corrosion and temperature.Each pipe is fitted with steel fittings adapted to your vehicle, and is assembled using a 12mm wrench.

This brake hose kit for Meharis with front disc brakes-STAINLESS STEEL-3.5mm-for 8mm spanners is higher quality than the original.

This set of rigid brake hoses is made of stainless steel. It is compatible with all models with a front disc brake system from July 1977 onwards. Its high quality manufacturing and the preforming of the different hoses make them highly reliable with durability superior to the majority of the other elements in the car.
Use an 8mm spanner to fit the connector ends to the master cylinder and wheel cylinders.

This package includes:
- the front disc connection hose
- the 2 spiral hoses connecting the rear drums
- the intermediate spiral pipe from the master cylinder to the front
- the intermediate pipe from the master cylinder to the rear

Watch out!!! Your vehicle may have been modified, so check the diameter of the wheel cylinder and the spanner you need to tighten the brake hose ends.
Use only LHM brake fluid.
LHM fluid is very corrosive to parts not designed for its use, and the wrong brake fluid could seriously damage your braking system.

Rigid brake line kit for Porsche 356 BT6 from 1962 to 1963 :
- 356 BT6 from 1962 to 1963
The kit contains 8 rigid brake hoses and is suitable for single-circuit vehicles without brake booster.

This brake hose kit for Citroën CX (08/1974-05/1989) - Sedan is higher quality than the original.
This set of rigid brake hoses is made of copper. It is compatible with all CX Sedan models.The high-quality copper hoses are the exact length of the original assembly and will require forming before fitting.
All circuit connections to the master cylinder and wheel cylinders are made using a size 8 wrench.
This assembly includes- hoses from the front distributor to the right and left front calipers- connection hose to rear distributor- intermediate hose from master cylinder to front distributor- return hose from front distributor to master cylinder- intermediate hose from master cylinder to rear distributor- hoses from rear distributor to right and left rear discs
Caution: if your vehicle has been modified, check the diameter of the wheel cylinder and the wrench required to tighten the brake hose ends.Use only LHM brake fluid.LHM fluid is highly corrosive to parts not intended for its use, and the wrong brake fluid can seriously damage your braking system.

This brake hose kit for Citroën BX (07/1989-07/1994) - with ABS is of superior quality to the original.
This set of rigid brake hoses is made of copper. It is compatible with all models equipped with the ABS system introduced in July 1989.The high-grade copper hoses are the exact length of the original assembly and will require shaping before fitting.
All circuit connections to the master cylinder and wheel cylinders are made using an 8 or 10mm wrench if the hose is 4.5mm.
This assembly includes- hoses from the ABS coupling to the right and left front caliper hoses (4.5mm)- brake pressure regulator hose to ABS coupling (3.5mm)- brake pressure regulator hose to rear manifold (3.5mm)- right rear brake hose (3.5mm)- left rear brake hose (3.5mm)- ABS coupling hose to rear brakes (4.5mm)- ABS coupling to ABS block (3.5mm)- hose from brake pressure regulator to ABS coupling (3.5mm)- 4 hoses from ABS block to ABS coupling (4.5mm)
Caution: if your vehicle has been modified, check the diameter of the wheel cylinder and the wrench required to tighten the brake hose ends.Use only LHM brake fluid.LHM fluid is highly corrosive to parts not intended for its use, and the wrong brake fluid can seriously damage your braking system.

Flexible de sortie de réservoir de frein pour VOLKSWAGEN Transporter T4 de 1999 à 2003 pour véhicule avec programme électronique de stabilité ESP et depuis châssis n°70-Y-027264
Longueur : 80mm

Steel brake hose kit for Mercedes Pagode

For Mercedes SL W113 Pagoda :
- 230 SL (113.042) from 07/1963 to 07/1965

This complete steel brake hose kit contains all the custom-made rigid brake hoses required for a complete brake line rebuild.

Complete set of copper rigid brake hoses for BMW 3 Series E30 without ABS system:

- 316
- 318i
- 320i

This kit of custom brake hoses will allow you to restorethebrake systemof your E30.

Of European manufacture, these copper hoses, more malleable than steel ones, can be hand-formed.

In addition to its flexibility, copper has significant pressure, corrosion and temperature resistance.

Each hose is crimped with steel fittings specifically tailored to your vehicle and is mounted with an 11mm wrench.

This front master cylinder brake hose for 2CV (02/1970-06/1970) - 4.5mm is of superior quality to the original.
This 4.5mm front brake hose for 2CV is compatible with assemblies requiring a 9 key. It was only used on 2CV sedans for 6 months at the launch of the 2CV4 and 2CV6. It succeeded the intermediate assembly using banjos for the front brakes, and was replaced in June 1970 by a complete system in 3.5mm and wrench 8. Caution: your vehicle may have been modified, so check the diameter of the wheel cylinder and the wrench required to tighten the brake hose ends.
The fitting is a 9 thread with a 10 wrench opening.

Use only DOT4 or DOT5 brake fluid.LHM fluid is highly corrosive to parts not intended for its use, and the wrong brake fluid can seriously damage your braking system.

This brake hose kit for Peugeot 504 Berline L(09/1974-09/1982) respects the original dimensions.
This set of rigid brake hoses for Peugeot 504 L is made of copper.The high quality copper hoses are the length of the original assembly and will require forming before fitting.
All circuit connections via M10x1 end fittings.This set includes:- 2 right and left front outer pipes- 2 rear outer pipes, right and left- right and left front intermediate hoses
Caution: if your vehicle has been modified, check the diameter of the wheel cylinder and the wrench required to tighten the brake hose connectors.Use only DOT 4 or DOT 5 brake fluid.

This brake hose kit for Meharis with disc brakes is higher quality than the original.

This set of rigid brake hoses is made of copper. It is compatible with all models with a front disc brake system from June 1978.
The high quality copper hoses are the exact length of the original equipment and will require shaping before fitting.

All circuit connections through connection ends to the master cylinder and wheel cylinder can be fitted with an 8 mm spanner.

This package includes:
- the connecting pipes for the front callipers
- the 2 connection pipes for the rear drums
- the intermediate pipe from the master cylinder to the front
- the intermediate pipe from the master cylinder to the rear
- 16 x 3.5 mm barrel seals for "green" LHM brake fluid

Watch out!!! Your vehicle may have been modified, so check the diameter of the wheel cylinder and the spanner you need to tighten the brake hose ends.
Use only LHM brake fluid.
LHM fluid is very corrosive to parts not intended for its use, and the wrong brake fluid could seriously damage your braking system.

Steel brake hose kit for Mercedes Pagode

For Mercedes SL W113 Pagode :
- 250 SL (113.043) from 12/1966 to 01/1968
- 280 SL (113.044) from 01/1968 to 03/1971

This complete steel brake hose kit contains all the rigid brake hoses required for a complete brake line rebuild.

This front master cylinder brake hose for AMI6 and AMI8 (12/1963-07/1969) - 4.5mm is of superior quality to the original.
This 4.5mm front brake hose for 2CV is compatible with assemblies requiring a 9 key. It was only used on 2CV sedans for 6 months when the 2CV4 and 2CV6 were launched. It succeeded the intermediate assembly using banjos for the front brakes, and was replaced in June 1970 by a complete system in 3.5mm and wrench 8. Caution: your vehicle may have been modified, so check the diameter of the wheel cylinder and the wrench required to tighten the brake hose ends.
The fitting is a 9 thread with a 10 wrench opening.

Use only DOT4 or DOT5 brake fluid.LHM fluid is highly corrosive to parts not intended for its use, and the wrong brake fluid can seriously damage your braking system.

For Beetles 1302/1303 ->07/73, equipped with front drum brakes

Ensemble complet de canalisations de frein rigides en cuivre pour modèles avec 4 tambours.

Pour VW Coccinelle 1303
avec freins à tambours à l'avant.
Années : 07/1973 ->01/1980
Depuis châssis n° 134 2000 001->

Ce kit de canalisations de frein sur mesure vous permettra de restaurer le circuit de freinage de votre VW Coccinelle.

De fabrication Européenne, ces tuyaux en cuivre, plus malléables que ceux en acier, peuvent-être formés à la main.

En plus de sa souplesse, le cuivre dispose d'une résistance importante à la pression, à la corrosion et aux températures.
Chaque tuyau est serti de raccords en acier adaptés à votre véhicule et se monte à l'aide d'une clé de 11mm.

This complete brake hose kit for DYANEs with front drum brakes is higher quality than the original.

This set of rigid brake hoses is made of copper. It is compatible with all models with a front drum brake system from June 1970.
The high quality copper hoses are the exact length of the original equipment and will require shaping before fitting.

All circuit connections through connection ends to the master cylinder and wheel cylinder can be fitted with an 8 mm spanner.

This package includes:
- the 2 front drum connection pipes
- the 2 connection pipes for the rear drums
- the intermediate pipe from the master cylinder to the front
- the intermediate pipe from the master cylinder to the rear
- The hose from the sill connection to the rear tee
- 20 barrel seals 3.5mm for DOT4 or DOT5 liquids

Watch out!!! Your vehicle may have been modified, so check the diameter of the wheel cylinder and the spanner you need to tighten the brake hose ends.
Use only DOT4 or DOT5 brake fluid.
LHM fluid is very corrosive to parts not intended for its use, and the wrong brake fluid could seriously damage your braking system.

Complete set of copper rigid brake hoses for BMW 3 Series E36Coupe and Convertible with ABS without ASC T: - 325i

This kit of custom brake hoses will allow you to restorethebrake systemof your E36.

Of European manufacture, these copper hoses, more malleable than steel ones, can be formed by hand.

In addition to its flexibility, copper has significant pressure, corrosion and temperature resistance.

Each hose is crimped with steel fittings specifically tailored to your vehicle and is mounted with an 11mm wrench.

Complete set of copper rigid brake hoses for BMW 3 Series E36Berline and Touring with ABS without ASC T

- 320i

This kit of custom brake hoses will allow you to restorethebrake systemof your E36.

Of European manufacture, these copper hoses, more malleable than steel ones, can be formed by hand.

In addition to its flexibility, copper has significant pressure, corrosion and temperature resistance.

Each hose is crimped with steel fittings specifically tailored to your vehicle and is mounted with an 11mm wrench.

Complete kit of rigid copper brake tubing.
Complete tubing for models without a brake booster

For VW Combi Bay Window T2A, 08/1970 ->07/1971
Models without a brake booster.
Chassis n°211 2000 001 ->211 2300 000.

This complete brake hose kit for Meharis with front drum brakes is higher quality than the original.

This set of rigid brake hoses is made of copper. It is compatible with all models with a front drum brake system from June 1970.
The high quality copper hoses are the exact length of the original equipment and will require shaping before fitting.

Use an 8mm spanner to fit the circuit via the connector ends to the master cylinder and wheel cylinders.

This package includes:
- the 2 front drum connection pipes
- the 2 connection pipes for the rear drums
- the intermediate pipe from the master cylinder to the front
- the intermediate pipe from the master cylinder to the rear
- The hose from the sill connection to the rear tee
- 20 barrel seals 3.5mm for DOT4 or DOT5 liquids

Watch out!!! Your vehicle may have been modified, so check the diameter of the wheel cylinder and the spanner you need to tighten the brake hose ends.
Use only DOT4 or DOT5 brake fluid.
LHM fluid is very corrosive to parts not intended for its use, and the wrong brake fluid could seriously damage your braking system.