Rigid brake hose

Brake line kit for Porsche 911 type G from 1974 to 1976 :
- 911 2.7 from 1974 to 1976- 911 S 2.7 from 1974 to 1976- 911 Carrera 2.7 from 1974 to 1976- 911 Carrera 3.0 from 1976
This set of 10 rigid hoses is suitable for vehicles with dual brake circuits and no brake booster.

Complete rigid copper brake hose kit for single circuit.

For VW Oval Split Screen Beetle
& Karmann-Ghia type 14
Years: until ->07/1957
Up to chassis no. -> 1 600 439.

Complete kit of rigid copper metal brake tubing.

For VW Combi Bay Window, 08/1970 ->07/1979
Models with brake booster.
since chassis no. 211 2000 001->

This complete set of brake hoses for Meharis with drum brakes - STAINLESS STEEL is higher quality than the original.

This set of rigid brake hoses is made of stainless steel. It is compatible with all models with a front drum brake system from June 1970. Its high quality manufacturing and the preforming of the different hoses make them highly reliable with durability superior to the majority of the other elements in the car.
All connection ends to the master cylinder and wheel cylinder can be fitted with an 8 mm spanner.

This package includes:
- the 2 front drum connection pipes
- the 2 spiral hoses connecting the rear drums
- the intermediate spiral pipe from the master cylinder to the front
- the intermediate pipe from the master cylinder to the rear

Watch out!!! Your vehicle may have been modified, so check the diameter of the wheel cylinder and the spanner you need to tighten the brake hose ends.
Use only DOT4 or DOT5 brake fluid.
LHM fluid is very corrosive to parts not intended for its use, and the wrong brake fluid could seriously damage your braking system.

This brake hose kit for Renault 4 double circuit (10/1976-07/1986) - 4 outlets respects original dimensions.

This set of rigid brake hoses for R4 is made of copper. It is compatible with R4 sedan or van models with a dual-circuit brake system with 4 outlets on the master cylinder.
High-quality copper hoses are the length of the original assembly and will require forming before fitting.

with the exception of the distributor connection on the master cylinder, all circuit connections via 3/8"-24 UNF nipples 21mm long.

This set includes:
- the 2 rear drum connection hoses
- connection hose from rear regulator to right rear
- connection hose from rear regulator to left rear
- intermediate hose from master cylinder to front right
- intermediate hose from master cylinder to front left
- 2 hoses from master cylinder to distributor

Caution: if your vehicle has been modified, check the wheel cylinder diameter and the wrench required to tighten the brake hose ends.
Use only DOT 4 or DOT 5 brake fluid.

Rigid brake line kit for VW Combi Split from 08/1966 to 07/1967

Kit of rigid brake hoses for cars with simple braking system. It is suitable for Porsche :
- 911 from 1965 to 1967
- 912 from 1966 to 1967

This brake hose between front callipers for 2cvs - STAINLESS STEEL is of high quality.

This rigid brake calliper connection hose is compatible with all disc brake models.
Its 3.5mm diameter stainless steel tube is higher quality than the original.

Complete kit of rigid copper brake tubing.
Complete tubing for models without a brake booster

For VW Combi Bay Window T2B,
Years: Since 12/1972 ->

Complete kit of rigid copper brake tubing.
Complete tubing for models without a brake booster

For VW Combi Bay Window T2A, 08/1971 ->07/1972
Models without a brake booster.
Chassis n°212 2000 001 ->212 2300 000.

Rigid brake hose kit for Porsche 356 Pre-A and A from 1950 to 1959 :
- 356 Pre-A from 1950 to 1955- 356 A from 1956 to 1959
This kit of 7 brake hoses is suitable for vehicles with a single brake circuit.

This long intermediate brake hose for AMI6 and AMI8 (12/1963-07/1969)- 4.5mm is specific to early AMI8s and AMI6s.
This 4.5mm underbody brake hose for AMI6 and AMI8 is compatible with assemblies requiring a 9" wrench.Please note that your vehicle may have been modified, so check the diameter of the wheel cylinder and the wrench required to tighten the brake hose ends.
The fitting is a 9 thread with a 10 wrench opening.
Use only DOT4 or DOT5 brake fluid.LHM fluid is highly corrosive to parts not intended for its use, and the wrong brake fluid can seriously damage your braking system.

This front brake hose for 2cv Fourgonnette (10/1967-09/1972) - 4.5mm is a higher quality than the original.

This front brake hose for 2CV Van in 4.5mm is compatible with assemblies requiring a 9 wrench.
It was used on the following 2CV Fourgonnette models:
- 2CV AK350 (10/1967-02/1970)
- 2CV AZU-A (03/1968-09/1972)It succeeded the intermediate mounting using banjos for the front brakes, and was replaced from June 1970 by a complete system in 3.5mm and 8 wrench.

Caution!!! your vehicle may have been modified, check the wheel cylinder diameter and the wrench needed to tighten the brake hose ends.


Use only DOT4 or DOT5 brake fluid.
LHM fluid is very corrosive to parts not intended for its use, the wrong brake fluid could severely damage your brake system.

Rigid brake line kit for Porsche 356 BT5 from 1960 to 1961 :
- 356 BT5 from 1960 to 1961
The kit contains 8 rigid brake hoses and is suitable for single-circuit vehicles without brake booster.

This front brake hose on box for 2cv Van (10/1967-09/1972) - 4.5mm is a higher quality than the original.

This front brake hose on box for 2CV Van in 4.5mm is compatible with assemblies requiring a 9 wrench.
It was used on the following 2CV Fourgonnette models:
- 2CV AK350 (10/1967-02/1970)
- 2CV AZU-A (03/1968-09/1972)It succeeded the intermediate mounting using banjos for the front brakes, and was replaced from June 1970 by a complete system in 3.5mm and 8 wrench.

Caution!!! your vehicle may have been modified, check the wheel cylinder diameter and the wrench needed to tighten the brake hose ends.


Use only DOT4 or DOT5 brake fluid.
LHM fluid is very corrosive to parts not intended for its use, the wrong brake fluid could severely damage your brake system.

This rear brake hose kit for DYANEs and Acadianes - STAINLESS STEEL-3.5mm-for 8mm spanners is higher quality than the original.

This pair of rear spiral brake hoses is made of stainless steel. It is compatible with all DYANEs and Acadianes from July 1978.
Its high quality manufacturing and the preforming of the different rear hoses make them highly reliable with durability superior to the majority of the other elements in the car.
Use an 8mm spanner to fit the connector ends to the central fitting and wheel cylinders.

Watch out!!! Your vehicle may have been modified, so check the diameter of the wheel cylinder and the spanner you need to tighten the brake hose ends.

Watch out!!! Check the colour of your brake fluid and barrel gaskets, use the right gaskets for your brake fluid:
- with red dots for DOT4 or DOT5 liquid.
- green dot for the LHM

LHM fluid is very corrosive to parts not designed for its use, and the wrong brake fluid could seriously damage your braking system.

Pipe between brake fluid reservoir and master cylinder
single-circuit version.

For Beetle up to ->08/1967
N°->117 999 000.

This intermediate rear brake hose for 2CV Van AZU-A (03/1963-01/1972) - 4.5mm is a higher quality than the original.

This intermediate brake hose for 2CV in 4.5mm is compatible with assemblies requiring a 10 wrench.It was replaced from June 1970 by a complete system in 3.5mm and 8 wrench.Caution!!! your vehicle may have been modified, check the diameter of the wheel cylinder and the wrench needed to tighten the brake hose ends.


Use only DOT4 or DOT5 brake fluid.
LHM fluid is very corrosive to parts not intended for its use, the wrong brake fluid could severely damage your brake system.

This left front brake hose for Mehari (01/1972-07/1976) - drums is true to the original.

This rigid hose for Mehari made of 3.5mm diameter copper is to be formed.
It connects the Tee on top of the box to the left front wheel cylinder with a 8 wrench.
This hose is compatible with all single brake circuit drum front brake models from January 1972.

This complete brake hose kit for 2cvs with front drum brakes is higher quality than the original.

This set of rigid brake hoses is made of copper. It is compatible with all models with a front drum brake system from June 1970.
The high quality copper hoses are the exact length of the original equipment and will require shaping before fitting.

All circuit connections through connection ends to the master cylinder and wheel cylinder can be fitted with an 8 mm spanner.

This package includes:
- the 2 front drum connection pipes
- The 2 connection pipes for the rear drums
- The intermediate pipe from the master cylinder to the front
- the intermediate pipe from the master cylinder to the rear
- The hose from the sill connection to the rear tee
- 20 barrel seals 3.5mm for DOT4 or DOT5 liquids

Watch out!!! Your vehicle may have been modified, so check the diameter of the wheel cylinder and the spanner you need to tighten the brake hose ends.
Use only DOT4 or DOT5 brake fluid.
LHM fluid is very corrosive to parts not intended for its use, and the wrong brake fluid could seriously damage your braking system.