Rigid brake hose

Rigid copper brake hose 90 cm for 4.75 mm diameter
- Male / Male fittings- Fitting type: 3/8" 24UNF- Thread length: 18 mm- Internal diameter of ferrules: 5 mm
Made in Europe, our copper pipes are more malleable than steel and can be formed by hand.
In addition to its flexibility, copper is highly resistant to pressure, corrosion and temperature.Each pipe is fitted with steel fittings adapted to your vehicle, and is assembled using a 10mm wrench.

Rigid copper brake hose 40 cm for 4.75 mm diameter
- Male / Male fittings- Nipple type: 3/8" 24UNF- Thread length: 18 mm- Internal diameter of ferrules: 5 mm
Made in Europe, our copper pipes are more malleable than steel and can be formed by hand.
In addition to its flexibility, copper is highly resistant to pressure, corrosion and temperature.Each pipe is fitted with steel fittings adapted to your vehicle, and is assembled using an 11mm wrench.

Rigid copper brake hose 260 cm for 4.75 mm diameter
- Spigots Male / Male- Nipple type: 3/8" 24UNF- Thread length: 18 mm- Internal diameter of ferrules: 5 mm
Made in Europe, our copper pipes are more malleable than steel and can be formed by hand.
In addition to its flexibility, copper is highly resistant to pressure, corrosion and temperature.Each pipe is fitted with steel fittings adapted to your vehicle, and is assembled using a 10mm wrench.

This brake hose kit for Peugeot 504 Berline GL (09/1974-09/1982) complies with the original dimensions.
This set of rigid brake hoses for Peugeot 504 GL is made of copper.The high quality copper hoses are the length of the original assembly and will require forming before fitting.
All circuit connections via M10x1 end fittings.This set includes:- 2 front pipes, left and right- 2 right and left rear pipes- 2 right and left rear outer pipes- central underbody hose
Caution: if your vehicle has been modified, check the diameter of the wheel cylinder and the wrench required to tighten the brake hose ends.Use only DOT 4 or DOT 5 brake fluid.

110 cm rigid copper brake hose for 3.5 mm diameter
- End fittings Male / Male- End fitting type: M8 x 125- Thread length: 20 mm- Internal diameter of ferrules: 5 mm
Made in Europe, our copper pipes are more malleable than steel and can be formed by hand.
In addition to its flexibility, copper is highly resistant to pressure, corrosion and temperature.Each pipe is fitted with steel fittings adapted to your vehicle, and is assembled using an 8mm wrench.

Rigid copper brake hose 264 cm for 3.5 mm diameter
- End fittings Male / Male- End fitting type: M8 x 125- Thread length: 20 mm- Internal diameter of ferrules: 5 mm
Made in Europe, our copper pipes are more malleable than steel and can be formed by hand.
In addition to its flexibility, copper is highly resistant to pressure, corrosion and temperature.Each pipe is fitted with steel fittings adapted to your vehicle, and is assembled using an 8mm wrench.

This rear brake hose for Dyane (08/1967-06/1970) - 4.5mm is of superior quality to the original.
This 4.5mm rear brake hose for Dyane is compatible with assemblies requiring a 9 key and has been used on the following Dyane models:- DYANE - AYA - (08/1967-01/1969)- DYANE 4 - AYA2 - (03/1968-02/1970)- D6 - AYA3 - (01/1968-04/1968)- DYANE 6 - AYA3 - (06/1968- 02/1970)
It was replaced in June 1970 by a complete system in 3.5mm and key of 8. Caution! your vehicle may have been modified, check the diameter of the wheel cylinder and the key needed to tighten the brake hose ends.

Use only DOT4 or DOT5 brake fluid.LHM fluid is highly corrosive to parts not intended for its use, and the wrong brake fluid can seriously damage your braking system.

Pipe between brake fluid reservoir and master cylinder
single-circuit version.

For Beetle up to ->08/1967
N°->117 999 000.

Rigid connection hoses between master cylinder and brake chamber for dual-circuit models.

For VW Beetle 1200, 1300, 1500
Years : since 08/1967->
From chassis N° 118 000 001->
(except 1302 / 1303)

Rigid connection hoses between master cylinder and brake chamber.

For VW Beetle 1302

This brake hose kit for RENAULT 14 (01/1976-06/1983) respects the original dimensions.
This set of rigid brake hoses for RENAULT 14 is made of copper.The high quality copper hoses are the length of the original assembly and will require forming before fitting.
All circuit connections via M10x1 end fittings.This set includes:- 2 front pipes, left and right- 2 right and left rear pipes- 2 right and left rear intermediate hoses- central hose for sedan
Caution: if your vehicle has been modified, check the diameter of the wheel cylinder and the wrench required to tighten the brake hose ends.Use only DOT 4 or DOT 5 brake fluid.

This brake hose kit for RENAULT 12 L and TL (09/1969-09/1979) complies with the original dimensions.
This set of rigid brake hoses for RENAULT 12 L and TL is made of copper.The high quality copper hoses are the length of the original assembly and will require shaping before fitting.
All circuit connections via 3/8" 24UNF nipples.This set includes:- 2 front pipes, left and right- 2 rear hoses, left and right- central hose for sedan
Caution: if your vehicle has been modified, check the diameter of the wheel cylinder and the wrench required to tighten the brake hose nipples.Use only DOT 4 or DOT 5 brake fluid.

This brake hose kit for RENAULT 12 (09/1969-09/1979) respects the original dimensions.
This set of rigid brake hoses for RENAULT 12 is made of copper.The high quality copper hoses are the length of the original assembly and will require forming before fitting.
All circuit connections via 3/8" 24UNF nipples.This set includes:- 2 front pipes, left and right- 2 rear hoses, left and right- central hose for sedan- central hose for station wagon
Please note that your vehicle may have been modified, so check the diameter of the wheel cylinder and the wrench required to tighten the brake hose ends.Use only DOT 4 or DOT 5 brake fluid.

This set of rigid brake hoses for RENAULT 18 with LUCAS GIRLING mounting is made of copper.The high quality copper hoses are the length of the original assembly and will require forming before fitting.
All circuit connections via 3/8" 24UNF fittings.This set includes:- 2 front pipes, left and right- 2 rear hoses, left and right- central hose for sedan
Caution: if your vehicle has been modified, check the diameter of the wheel cylinder and the wrench required to tighten the brake hose nipples.Use only DOT 4 or DOT 5 brake fluid.

Rigid copper brake hose 109 cm for 3.5 mm diameter
- End fittings Male / Male- End fitting type: M8 x 125- Thread length: 20 mm- Internal diameter of ferrules: 5 mm
Made in Europe, our copper pipes are more malleable than steel and can be formed by hand.
In addition to its flexibility, copper is highly resistant to pressure, corrosion and temperature.Each pipe is fitted with steel fittings adapted to your vehicle, and is assembled using an 8mm wrench.

Complete set of rigid copper brake lines for models with front discs and rear drums.

For VW Beetle 1302 & 1303 S
with front disc brakes.
Years: 08/1970 ->01/1980
Chassis No. 111 2000 001 ->133 3200 000.

This tailor-made brake line kit will allow you to restore the brake system of your VW Beetle.

Made in Europe, these copper pipes, more malleable than steel pipes, can be formed by hand.

In addition to its flexibility, copper has significant resistance to pressure, corrosion and temperatures.
Each pipe is crimped with steel fittings suitable for your vehicle and is fitted using an 11mm wrench.

Single circuit

Complete set of copper rigid brake hoses for double circuit and independent rear suspension (IRS). Superior quality.

For VW Beetle 1500 Automatic
& Karmann-Ghia type 14 Automatic
Years: from 08/1966->
From Chassis no.:
- Saloon: 117 000 001->
- Cabriolet: 157 000 001->
- Karmann-Ghia: 147 000 001->
+ Buggy with cardan chassis.

Complete rigid copper brake hose kit for single circuit.

For VW Oval Split Screen Beetle
& Karmann-Ghia type 14
Years: until ->07/1957
Up to chassis no. -> 1 600 439.

This front right brake hose for 2cvs with front drum brakes is true to the original.

This rigid brake hose made of copper with a 3.5mm diameter needs shaping.
It connects the tee on top of the gearbox to the front right wheel cylinder with 8mm fitted nipples.
This hose is compatible with all front drum brake models from June 1970.