Bumper mouldings

ForAudi A6 C5 from 08/01 ->
with 4- and 6-cylinder engines.

NOTE: not suitable for S6, RS6 and V8

Front part support clip. Need 4 pieces for one vehicle, sold individually.
Suitable for VW Transporter T25 / T3 CARAT from 05/1979 to 07/1992Original Volkswagen Classic Parts.

Width: 36mm
Designed for chrome on the moulding

This bumper trim for 2CV Fourgonnette AK350 and AZU-A (03/1963-09/1972)- grey is a quality reproduction.

This grey bumper trim for 2CV Fourgonnette is mounted on the front bumper.

Compatible models :
- 2CV AK 350 type AK: 04/1963 to 07/1970
- 2CV AZU type AZU-A: 03/1963 to 09/1972

This narrow bumper adhesive for 2cv vans - black is compatible with front bumpers after 1963 and the narrow rear bumpers on some 2cv saloons.

Rear left bumper band for Porsche 911 from 1983 (chassis 91DS) :

- 911 3.0 SC of 1983
- 911 Carrera 3.2 from 1984 to 1989

Mounts between the stop and the guard.

Original PORSCHE part.

Rear center chrome bumper strip for Mercedes C-Class W203 sedan
Suitable for elegance and avantgarde finishes
Not suitable for station wagon or sedan with parking radar

Right rear bumper moulding for Mercedes E-Class W210 up to 10/1999
Headband with holes for decorative trim
Suitable for sedan with elegance/avantgarde finish

Rear right-hand protective molding on the original standard type rear bumper or M trim for BMW 3 Series E46 Sedan until 08/2001:

- All gasoline and diesel models.

WARNING: Not suitable for Touring, Coupé, Cabriolet and M3 versions!

This rear bumper rod is a so-called "adaptable" quality part that does not come from the manufacturer.

Moulure de pare-chocs arrière gauche côté conducteur finition lisse noire pour BMW Série 3 E36 Berline, Coupé et Cabriolet jusqu'au 08/1993 :

- Tous modèles essence et diesel sans système d'aide au stationnement (y compris M3)

Cette baguette de protection arrière possédant une texture lisse est également adaptée pour pare-chocs arrière M-Technic (habillage M) jusqu'au 03/1995.

Rear left-hand protective molding on the driver's side on the original standard type rear bumper or M trim for BMW 3 Series E46 Sedan until 08/2001:

- All gasoline and diesel models.

WARNING: Not suitable for Touring, Coupé, Cabriolet and M3 versions!

This rear bumper side strip is a so-called "adaptable" quality part that does not come from the manufacturer.

This rear bumper side trim for 2CV A-AZ (07/1949-03/1963)- grey is specific to models with old bumpers.
This grey exterior bumper trim for vintage 2CV is compatible with all 2CV models with early bumper models.
Compatible models : - 2CV A type A: 07/1949 to 03/1961- 2CV AZ type AZ: 10/1954 to 03/1963- 2CV AZL type AZ: 12/1956 to 03/1963- 2CV AZLP type AZ: 09/1957 to 03/1963

Moulding covered with a coat of primer

LH trim in graphite grey (7G9) for VOLKSWAGEN Transporter T5 from 2010 to 2015 from chassis 7H-A-200001-> or 7J-A-200001->.

Chrome front bumper strip left for Mercedes C-Class W203
Located on the upper part of the front bumper strip

This bumper trim for 2CV AZA-AZAM (03/1963-02/1970)- black is a quality reproduction.

This black bumper cover for 2CV AZA-AZAM can be mounted on the front or rear. It comes with 4 mounting clips and 2 end caps.

Compatible models:
- 2CV AZA type AZ-A: 03/1963 to 02/1970
- 2CV AZAM type AZ-AM: 03/1963 to 09/1967

Moulure centrale de pare-chocs arrière finition lisse noire pour BMW Série 3 E36 Berline, Coupé et Cabriolet jusqu'au 08/1993 :

- Tous modèles essence et diesel sans système d'aide au stationnement (y compris M3)

Cette baguette de protection arrière possédant une texture lisse est également adaptée pour pare-chocs arrière M-Technic (habillage M) jusqu'au 03/1995.

For VOLKSWAGEN Transporter T5 bus or van (due to the graphite grey colour) up to chassis ->7H-9-200000 or ->7J-9-020000

Rear left-hand protective molding on the driver's side on the original standard type rear bumper or M trim for BMW 3 Series E46 Sedan phase 2 from 09/2001:

- All gasoline and diesel models.

WARNING: Not suitable for Touring, Coupé, Cabriolet and M3 versions!

This rear bumper side strip is a so-called "adaptable" quality part that does not come from the manufacturer.

Without hole for headlight washer.