Floor

DANSK weld-on footrests for Porsche 911 type F, G and 912 from 1965 to 1989 :

- Porsche 911 type F :

- 911 2.0 from 1965 to 1967
- 911 2.0 S from 1967
- 911 2.0 T / L / S from 1968
- 911 2.0 T / E / S from 1969
- 911 2.2 T / E / S from 1970 to 1971
- 911 2.4 T / E / S from 1972 to 1973
- 911 2.7 Carrera RS from 1973

- Porsche 911 type G :

- 911 2.7 from 1974 to 1977
- 911 S 2.7 from 1974 to 1977
- 911 Carrera 2.7 from 1974 to 1976
- 911 Carrera 3.0 from 1976 to 1977
- 911 SC 3.0 from 1978 to 1983
- 911 Carrera 3.2 from 1984 to 1989

- 911 Turbo 3.0 from 1975 to 1977
- 911 Turbo 3.3 from 1978 to 1989

- Porsche 912 :

- 912 1.6 - 90 hp (616.36) from 1966 to 1969

Complete front floor
Caution, right-hand drive only (RHD).
Very good workmanship, faithful to the original.

For VW Combi Split Bus (03/1955-08/1959)

Rear quarter floor left driver side length 67cm for BMW 02 series E10 Sedan:

- All models 1502 to 2002Turbo from 03/1966 to 07/1977

The dimensions of this plate are designed to facilitate installation and ensure a perfect fit on the body.

Enclosed by insulation and carpeting, the BMW E10's floorboards are showing the effects of time, with perforating rust and various impacts underneath. Partial replacement by a quarter floor will enable targeted body restoration while respecting the original dimensions.

This quarter floor is delivered bare in black storage paint. Before final painting, it must be treated and prepared to prevent corrosion from reappearing.

Give your E10 a high-quality body part!

This metal repair plate is called "adaptable" because it does not come from the manufacturer.

Centre dome on right-hand floor plate
for 3-point mounting seat.

For Beetle all versions from 08/1972->
Hatchback& Cabriolet: 1200 & 1303

This right front floor repair sheet for 2CV Fourgonnette is of superior quality.Compatible with all 2CV sedan and van models.It allows targeted repair of damaged floors, avoiding the need for complete replacement.

Right-hand floor repair plate under passenger feet for VW Transporter T25 / T3 from 05/1979 to 07/1992.

This left-hand side floor for AZU, AK250 and AK350 is true to the original.

This right-hand half floor for 2cv AZU, AK250 and AK350 vans with 110mm diameter suspension cylinders is reinforced and includes the seat adjustment rails. Made of electro-galvanised steel, it has superior corrosion protection to the original floors.

This rear crossmember screw for Meharis - 10X135mm is compatible with all models.

This long chassis screw is used to fix the rear axle clevises on the chassis of all Meharis.

The high forces absorbed by this screw require the use of high quality dichromated steel.

Complete part for the replacement of the front trunk floor of left-hand drive Porsche 911 and 912 until 1972 :

-> Porsche 912 :
- 912 1.6 of 1969

-> Porsche 911:
- 911 2.0 T / E / S of 1969
- 911 2.2 T / E / S from 1970 to 1971
- 911 2.4 T / E / S of 1972

This front apron for 2CV A-AZ (07/1949-06/1959) is a high quality reproduction.

This firewall for 2CV A and AZ is of a higher quality than the original. Faithful in its design, it benefits from an electro-galvanized sheet metal of a quality unknown to the origin.It is compatible with all 2CV Sedans or Van before the modification of the heating and demisting system in May 1959.

DANSK Long front sub-frame plate for Porsche 912, 911 and 930 :

-> Porsche 912 :
- 912 E 2.0 of 1976

-> Porsche 911 :
- 911 2.7 from 1974 to 1977
- 911 2.7 S from 1974 to 1977
- 911 Carrera 2.7 from 1974 to 1976
- 911 Carrera 3.0 from 1976 to 1977
- 911 3.0 SC from 1978 to 1983
- 911 Carrera 3.2 from 1984 to 1989

-> Porsche 930 :
- 911 3.0 Turbo from 1975 to 1977
- 911 3.3 Turbo from 1978 to 1989

With clearance for the tank and shock absorber mounting points.

Floor repair panel for Mercedes

For W114 and W115 Saloon and coupe (1968-1976)
Front right (passenger) side

This sheet enables you to repair damaged or perforated floors due to corrosion

DANSK chassis number plate repair sheet for Porsche 911 type G from 1982 to 1989 :

- 911 SC 3.0 from 1982 to 1983
- 911 Carrera 3.2 from 1984 to 1989
- 911 Turbo 3.3 from 1982 to 1989

DANSK long underframe with bottom bracket for Porsche 912, 911 and 930 :
-> Porsche 912:- 912 1.6 from 1966 to 1969- 912 E 2.0 from 1976
-> Porsche 911:- 911 2.0 from 1965 to 1967- 911 2.0 T / L / E / S from 1967 to 1969- 911 2.2 T / E / S from 1970 to 1971- 911 2.4 T / E / S from 1972 to 1973- 911 2.7 Carrera RS from 1973- 911 2.7 from 1974 to 1977- 911 2.7 S from 1974 to 1977- 911 Carrera 2.7 from 1974 to 1976- 911 Carrera 3.0 from 1976 to 1977- 911 3.0 SC from 1978 to 1983- 911 Carrera 3.2 from 1984 to 1989
-> Porsche 930:- 911 3.0 Turbo from 1975 to 1977- 911 3.3 Turbo from 1978 to 1989
Suitable for left-hand drive only.

This right-hand side floor panel for DYANE (03/1968-08/1983) is faithful to the original.

This right half floor for Dyane with 110mm diameter suspension cylinders is reinforced and includes the seat adjustment rails and the securing for the safety belts. Made of electro-galvanised steel, it offers superior corrosion protection to the original floors.

Replacement plate for right rear floor panel,
for Mercedes W123 Saloon, S123 Estate and C123 Coupé

This 2CV left front floor repair sheet is of superior quality.Compatible with all 2CV sedan and van models.It allows targeted repair of damaged floors, avoiding the need for complete replacement.

Tôle de plancher de cabine
Côté : avant gauche

Pour Bus VW Combi Split Brésilien de 1957 à 1975.

Repair plate for left rear half-floor
without seat rail.

For Beetle all models up to ->07/1972
Sedan