Floor

This chassis repair sheet for 2CV Van (03/1951-03/1978)is of superior quality.

This chassis repair sheet for 2CV allows, without having to replace the entire chassis, to replace the top and bottom, front and rear sheets of a damaged chassis, regardless of model.

Left side floor for 2CV A-AZ (07/1949-02/1970) is of superior quality.

Perfectly faithful to the original, this left side floor for 2CV antique is compatible with small pot suspension. Made of electro-galvanized steel, its manufacturing quality is superior to the original floor.

DANSK Rear right seat pan for Porsche 911 and 912 from 1973 to 1989 :

-> Porsche 912 :
- 912 E 2.0 of 1976

-> Porsche 911 :
- 911 2.7 from 1974 to 1977
- 911 2.7 S from 1974 to 1977
- 911 Carrera 2.7 from 1974 to 1976
- 911 Carrera 3.0 from 1976 to 1977
- 911 3.0 SC from 1978 to 1983
- 911 Carrera 3.2 from 1984 to 1989

-> Porsche 930 :
- 911 3.0 Turbo from 1975 to 1977
- 911 3.3 Turbo from 1978 to 1989

Ideal for the restoration of the backseat floor

DANSK Outer right floor edge for Porsche 911, 912 and 930 from 1965 to 1989 :

-> Porsche 912 :
- 912 1.6 from 1966 to 1969
- 912 E 2.0 of 1976

-> Porsche 911 :
- 911 2.0 from 1965 to 1967
- 911 2.0 T / L / E / S from 1967 to 1969 - short and long Wheel base
- 911 2.2 T / E / S from 1970 to 1971
- 911 2.4 T / E / S from 1972 to 1973
- 911 2.7 Carrera RS of 1973
- 911 2.7 from 1974 to 1977
- 911 2.7 S from 1974 to 1975
- 911 Carrera 2.7 from 1974 to 1976
- 911 Carrera 3.0 from 1976 to 1977
- 911 3.0 SC from 1978 to 1983
- 911 Carrera 3.2 from 1984 to 1989

-> Porsche 930 :
- 911 3.0 Turbo from 1975 to 1977
- 911 3.3 Turbo from 1978 to 1989

Equerre de montant de coin arrière de plancher pour VOLKSWAGEN Transporter T4 de 1991 à 2003 toutes versions.
Besoin de 2 par véhicule.

Front left-hand quarter floor panel repair panel.

For VW Old Beetle 1200/ 1303 Hatchback & Convertible
Years : from 08/1972->
Chassis 1200 : from N° 113 2000 001->
Chassis 1303 : from N° 133 2000 001->
Chassis Convertible : from N° 153 2000 001->

This DANSK steel sheet located on the front part of the chassis, partitions the fuel tank of Porsche 911 and 912 from 1965 to 1989. Element of structure, it contributes to the rigidity of your Porsche :

-> Porsche 912 :
- 912 1.6 of 1969
- 912 E 2.0 of 1976

-> Porsche 911 :
- 911 2.0 T / E / S of 1969
- 911 2.2 T / E /S from 1970 to 1971
- 911 2.4 T / E / S from 1972 to 1973
- 911 2.7 Carrera RS of 1973
- 911 2.7 from 1974 to 1977
- 911 2.7 S from 1974 to 1977
- 911 Carrera 2.7 from 1974 to 1976
- 911 Carrera 3.0 from 1976 to 1977
- 911 3.0 SC from 1978 to 1983
- 911 Carrera 3.2 from 1984 to 1989- Left-hand drive only

-> Porsche 930 :
- 911 3.0 Turbo from 1975 to 1977
- 911 3.3 Turbo from 1978 to 1989 - Left-hand drive only from 1984 onwards

This pedal floor for Renault 4 (10/1961-12/1993) is compatible with all 4L models.
This pedal floor for R4 is made from electro-galvanized sheet metal, a quality reproduction made in Europe that offers superior corrosion protection to the original sheet metal.

This rear crossmember screw for AMI 6 and AMI 8 cars - 10X135mm is compatible with all models.

This long chassis screw is used to fix the rear axle clevises on the chassis of all AMI 6 and AMI 8 cars.

The high forces absorbed by this screw require the use of high quality dichromated steel.

This front crossmember screw for AMI 6 and AMI 8 cars - 10X135mm is compatible with all models.

This front axle retainer screw is compatible with all models.
It allows the front axle to be attached to the chassis.

Right rear quarter floor passenger side length 67cm for BMW 02 series E10 Sedan:

- All models 1502 to 2002Turbo from 03/1966 to 07/1977

The dimensions of this plate are designed to facilitate installation and ensure a perfect fit on the body.

Enclosed by insulation and carpeting, the BMW E10's floorboards are showing the effects of time, with perforating rust and various impacts underneath. Partial replacement by a quarter floor will enable targeted body restoration while respecting the original dimensions.

This quarter floor is delivered bare in black storage paint. Before final painting, it must be treated and prepared to prevent corrosion from reappearing.

Give your E10 a high-quality body part!

This metal repair plate is called "adaptable" because it does not come from the manufacturer.

This boot floor on its own for 2cvs before 1970 is superior quality.

This boot bottom panel is located under the spare wheel. For 2cv saloons and is faithful to the original. Thicker and made of electro-galvanised steel, it has higher resistance to corrosion than the original panel.

Underfloor reinforcement for Mercedes Pagoda

For Mercedes SL W113 Pagoda all models :
- 230 SL (113.042) from 07/1963 to 01/1967
- 250 SL (113.043) from 12/1966 to 01/1968
- 280 SL (113.044) from 01/1968 to 03/1971

Left side (driver)

This reinforcing plate is located under the left-hand floor and stiffens the floor structure.

This boot floor on its own for 2cv saloons is superior quality.

This boot bottom plate is located under the spare wheel.It is faithful to the original on 2cv saloons. Thicker and made of electro-galvanised steel, it has higher resistance to corrosion than the original panel.

Suitable for:
- Golf 1 Saloon and Cabriolet
- Caddy
- Jetta
- Sirocco

Right-hand floor repair plate under passenger feet for VW Transporter T25 / T3 from 05/1979 to 07/1992.

DANSK Rear parcel shelf plate Porsche 911 and 912 from 1972 :

-> Porsche 912 :
- 912 E 2.0 of 1976

-> Porsche 911 :
- 911 2.4 T / E / S from 1972 to 1973
- 911 2.7 Carrera RS of 1973
- 911 2.7 from 1974 to 1977
- 911 2.7 S from 1974 to 1977
- 911 Carrera 2.7 from 1974 to 1976

This right rear interior crossmember for Volkswagen Beetle is compatible with all models from vintage 1955 to July 1967.
This interior chassis reinforcement is one of the favorite places for rust on Beetle chassis, particularly under the rear seat.
For VW Beetle sedans and convertibles up to July 1967

This left front floor repair sheet for 2CV Fourgonnette is of superior quality.Compatible with all 2CV sedan and van models.It allows targeted repair of damaged floors, avoiding the need for complete replacement.

This beam under seat for 2CV (02/1970-07/1990) is a superior quality part.This complete step under seat for 2CV is faithful to the original. Made of electro-galvanized steel of a higher quality than the original, it allows you to find a solid rear seat support for many years.