Floor

Left-hand half-floor on driver's side for Volkswagen Golf 3 Sedan and Cabriolet with left-hand drive (LHD) :

- All models from 08/1991 to 08/1998

ATTENTION: Not suitable for RHD right-hand drive version!

Enclosed by insulation and carpeting, the floorboards of the Golf 3 are showing the effects of time, with perforating rust and various impacts underneath. Replacing them in their entirety will enable the bodywork to be restored to its original dimensions.

This half-floor, comprising the front and rear parts in 1 piece, is delivered bare in black storage paint. Before final painting, it must be treated and prepared to prevent corrosion from reappearing.

This metal repair sheet is called "adaptable" because it does not come from the manufacturer.

The floor is an essential body part that covers and protects the area under the feet of drivers and passengers at the front of the vehicle. It is often subject to rusting due to humidity, road salt and wear over time. Replacing the floor panel is crucial to the safety and integrity of the vehicle's chassis.
This complete front cab floor panel is suitable for VW Combi Bay Window from 08/1972 to 07/1979 from chassis no. 213 2000 001.Brazilian model suitable for European Combi

L-shaped seat rail.
To be welded to the floor
Left or right mounting
Sold individually

For VW Beetle all sedan models

Replacement plate for left boot floor panel,
for Mercedes W123 Saloon, S123 Estate and C123 Coupé

Front plastic fairing for Porsche 911 type 964 Carrera 4 from 1989 to 1994 :
- 964 3.6 - 250hp (M64.01) Carrera 4 from 1989 to 1994

Replacement pipe for the pipe running into the chassis and containing the heating valve cables. 2parts required per Kombi, sold individually.

For VW Combi Split Brazil (1957-1975)

Replacement for the pipe holding the rear gear selection rod running into the chassis.

For VW Kombi Split, 1950 ->07/1967

This front crossmember screw for 2cv cars and derivatives - 10X135mm is compatible with all models.

This front axle retainer screw is compatible with all models.
It allows the front axle to be attached to the chassis.

This chassis repair sheet for AMI6 and AMI8 (04/1961-03/1979)is of superior quality.

This chassis repair sheet for AMI6 and AMI8 allows, without having to replace the entire chassis, to replace the top and bottom, front and rear sheets of a damaged chassis, regardless of model.

This lower right rear closure repair sheet for 2CV Fourgonnette AK - 35cm is faithful to the original.

This right rear repair panel for 2CV Fourgonnette AK is of superior quality to the original. This electro-galvanized sheet metal is slightly thicker than the original and offers far superior protection against corrosion.

Compatible models :
- 2CV AK 350 type AK: 04/1963 to 07/1970
- 2CV AZU 250 type AZU-B/AK-AP: 01/1972 to 03/1978
- 2CV AKS type AK-AK: 07/1970 to 03/1978

Replacement for the pipe holding the clutch control cables running into the chassis.

For VW Combi Split Brazil (1957-1975)
Left-drive only

This boot floor on its own for 2cv saloons is superior quality.

This boot bottom plate is located under the spare wheel.It is faithful to the original on 2cv saloons. Thicker and made of electro-galvanised steel, it has higher resistance to corrosion than the original panel.

Tube for repairing central underfloor heating pipe
Diameter: 70 mm
Length: 1270 mm

For VW Combi Split, 1950 ->07/1967

Dansk left-hand floor for Porsche 911 and 912 from 1965 to 1973:

> Porsche 912 :

- 912 1.6 - 90 hp (616.36) from 1966 to 1969

> Porsche 911 :

- 911 2.0 from 1965 to 1967
- 911 2.0 T / L / E / S from 1967 to 1969
- 911 2.2 T / E / S from 1970 to 1971
- 911 2.4 T / E / S from 1972 to 1973
- 911 2.7 Carrera RS from 1973

For left-hand drive vehicles.

This left-hand side floor panel for 2cvs with small suspension cylinders after 1969 is faithful to the original.

This left half floor for 2cv saloons with 110mm diameter suspension cylinders is reinforced and includes the seat adjustment rails and the securing for the safety belts. Made of electro-galvanised steel, it offers superior corrosion protection to the original floors.

Replacement for the pipe holding the handbrake cables going into the chassis. 2 parts required per Kombi, sold individually.

For VW Combi Split Brazil (1957-1975)

This meter housing for 2cvs is high quality.
Tachometer bracket made of electro-galvanised steel for 2cv saloons and vans with small speedometers. Made in Europe, this sheet metal work is faithful to the original and is higher quality than the original.

Front right floor reinforcement plate for Porsche 911 type G from 1974 to 1989 :
- 911 2.7 from 1974 to 1977- 911 S 2.7 from 1974 to 1977- 911 Carrera 2.7 from 1974 to 1976- 911 Carrera 3.0 from 1976 to 1977- 911 SC 3.0 from 1978 to 1983- 911 Carrera 3.2 from 1984 to 1989- 911 Turbo 3.0 from 1975 to 1977- 911 Turbo 3.3 from 1978 to 1989
Part in black storage paint, must be primed after welding and painted in accordance with the rules of the art of bodywork restoration.

This right-hand boot bottom corner for 2cv saloons is high quality.
The right rear boot bottom gusset is made of electro-galvanised steel.
This repair panel is the link between the boot floor and the rear light panel.

Section located under and behind the rear bench seat
(white section on the photo)