Clutch forks

Clutch fork for Porsche 987 Cayman phase 1 fitted with a 5-speed mechanical gearbox :

- 987 2.7 Cayman phase 1 - 245 hp (M97.20) from 2007 to 2008

Spring guide cup for clutch fork with 20mm diameter shaft .

For VW Beetle, Karmann-Ghia, Type 3, Kübel 181
Years (08/1971-)

Clutch fork for Bmw z3 :
- Compatible with all Bmw z3 E36 Roadster and Coupé 6-cylinder petrol engine code m52tu and m54 from 04/1996 to 06/2002 including z3 M s50 s52 s54.

Rubber bushing on axis
of clutch fork.
2 required. Sold per unit.

For VW Transporter T25/T3, Bus,
Caravelle, Westafalia, Joker
Years: 05/1979 ->07/1992
All Petrol engines& Diesel, TD.
including Syncro version (4 x 4).

Clutch fork spring
For 16 mm diameter axle

Approximate spring diameter: 33 mm inside / 43 mm outside

For VW Beetle, Karmann-Ghia, Type 3, Kübel 181,
Years: (08/1960-07/1971)
For VW Combi Split and Bay Window, (08/1960-07/1975)

Clutch release bearing guide for Bmw 3 Series:
- Compatible with Bmw 3 Series E46 Sedan and Touring versions from 06/1998 to 12/2006 with 4 and 6 cylinder engines.
Type :
- 2.0D engine code m47d20tu- 2.5i engine code m54b25- 3.0i and ix engine code m54b30

The clutch fork for the latest AMI 8 model is compatible with all AMI 8 cars with M28 engines.

When replacing this bent sheet metal fork we advise you to replace the spring and potentially the axle if it shows signs of wear.

The clutch fork for 2cv Van after 1972, last model, is compatible with all 2cv models and derivatives with 435 or 602cc engines.

When replacing this bent sheet metal fork we advise you to replace its spring and potentially its axle if it shows signs of wear.

The clutch fork spring for DYANE and Acadiane after 1970 is mounted on the last fork model.

Clutch cable lever
For 16 mm diameter fork shaft .

For VOLKSWAGEN Combi Split Brazil (1957-1975)

Clutch fork repair kit
For 16 mm diameter axle

Approximate spring diameter: 33 mm inside / 43 mm outside

For VW Beetle, Karmann-Ghia, Type 3, Kübel 181,
Years: (08/1960-07/1971)
For VW Combi Split and Bay Window, (08/1960-07/1975)

This clutch fork shaft sleeve for DYANE and Acadiane after 1969 is made of steel

It is compatible with the last model fork mounted on all DYANE and Acadiane with 435 and 602cc engine from 1969

Clutch cable lever
For 16 mm diameter fork shaft .

For VW Beetle, Karmann-Ghia, Type 3, Kübel 181, (-07/1971)
For VW Combi Split

Clutch fork with guided stop.
Shaft diameter: 20 mm
Length: 200 mm
Supplied bare, without bushes.

For VW Beetle, Karmann-Ghia, type 3, Kübel 181
Years: (11/1971-)

The clutch fork spring for 2cv after 1970 is mounted on the last fork model fork.

Straight bearing bush on fork shaft
20mm diameter.
Original VW quality.

For VW :
- Beetle, from 08/71-> from chassis
since chassis N° 112 2070 813->
- Karmann-Ghia, since 08/71-> since chassis
from chassis No. 142 2070 813->
- Type 3, since 08/1971->
since chassis N° 312 2006 453->
- Kübel 181, since 08/1971->
since chassis N° 182 2000 001->
- Combi Bay Window, since 08/1975-> since chassis
since chassis N° 216 2000 001->

Retention spring on clutch lever,

For VW Golf 5 Sedan:
- 1.4 75hp (BCA)
- 1.4 80hp (BUD)
- 1.4 FSi 90hp (BKG, BLN)
- 1.4 TSi 122hp (CAXA)
- 1.4 TSi 140hp (BMY)
- 1.4 TSi 170hp (BLG)
- 1.6 102hp (BGU, BSE, BSF, CCSA)
- 1.6 FSi 115hp (BAG, BLF)
- 1.6 FSi 116hp (BLP)
- 1.9 TDi 90hp (BRU, BXF, BXJ)
- 1.9 TDi 105hp (BKC, BLS, BXE)
- 2.0 SDi 75hp (BDK)
- 2.0 FSi 150hp (AXW, BLX, BLY, BVX, BVY, BVZ)

For Golf 5 Variant:
- 1.4 80hp (BUD)
- 1.4 TSi 122hp (CAXA)
- 1.4 TSi 140hp (BMY)
- 1.4 TSi 170hp (BLG)
- 1.6 102hp (BSE, BSF, CCSA)
- 1.9 TDi 105hp (BLS, BXE)

Rubber bushing on fork shaft
fork axle with 20mm diameter
Need 2. Sold individually.

For VW :
- Beetle, from 08/71 onwards->
since chassis N° 112 2070 813->
- Karmann-Ghia, since 08/71-> from
from chassis N° 142 2070 813->
- Type 3, since 08/1971->
since chassis N° 3122006 453->
- Kübel 181, since 08/1971->
since chassis N° 182 2000001->
- Combi Bay Window, since 08/1975-> since chassis
from chassis N° 216 2000 001->

Clutch fork spring for VW Transporter T25 / T3 from 1979 to 1992.
For 20 mm diameter axle.

Clutch fork with guided stop.
Pin diameter: 16 mm
Length: 200 mm
Supplied bare, without bushes.

For VW Beetle, Karmann-Ghia, Type 3, Kübel 181,
Years: (08/1970-10/1971)