Clutch forks

Left-hand bearing bushing on axis
of clutch fork.

For VW Transporter T25/T3, Bus,
Caravelle, Westafalia, Joker
Years: 05/1979 ->07/1992
All Petrol engines& Diesel, TD.
including Syncro version (4 x 4).

Left-hand bearing bush on fork shaft
20mm diameter.
Original VW quality.

For VW :
- Beetle, since 08/71-> from chassis
since chassis N° 112 2070 813->
- Karmann-Ghia, since 08/71-> since chassis
since chassis N° 142 2070 813->
- Type 3, since 08/1971->
since chassis N° 312 2006 453->
- Kübel 181, since 08/1971->
since chassis N° 182 2000 001->
- Combi Bay Window, since 08/1975-> since chassis
since chassis N° 216 2000 001->

This clutch fork shaft for Mehari is made of steel

It is compatible with the last model fork mounted on all Mehari with 435 and 602cc engine from 1970

Clutch forkfor Bmw 5 Series: Bmw Series 5 E60: - 520i 2.2L 170hp from 02/2002 to 02/2005 (engine code M54B22)      
- 525i 192hp from 01/2002 to 02/2007 (engine code M54B25)     
- 530i 231hp from 12/2001 to 02/2005 (engine code M54B30)      
- 540i V8 306hp from 02/2005 to 02/2007 (engine code N62B40TU)   
- 545i V8 4.4L 333hp from 02/2002 to 08/2005 (engine code N62B44)      
- 550i V8 4.8L 367hp from 02/2005 to 02/2007 (engine code N62B48TU)    
- M5 V10 5.0L 507hp from 05/2003 to 02/2007 (engine code S85B50)      
- 525d 177hp from 02/2002 to 09/2004 (engine code M57D25TU)   
- 530d 218hp from 02/2002 to 09/2004 (engine code M57D30TU)    Bmw Series 5 E61: - 525i 192hp from 10/2002 to 02/2005 (engine code M54B25)   ;      
- 545i V8 4.4L 333hp from 11/2002 to 08/2005 (engine code N62B44)        
- 550i V8 4.8L 367hp from 02/2005 to 02/2007 (engine code N62B48)        
- M5 V10 5.0L 507hp from 12/2005 to 04/2010 (engine code S85B50) 

 

Clutch fork for Bmw 3 Series: - Compatible with all Bmw 3 Series E46 Sedan, Touring, Compact, Coupé and Cabriolet versions and engines from 04/1997 to 08/2006 including M3 engine code s54. Please note! For the 320D engine code M47 and M47TU there are 2 versions, please check your assembly before purchase. Not compatible with version 318D engine code M47 and M47TU.

Clutch fork bush kit for Peugeot 205 since 04/93
This kit contains the lower and upper ring of the clutch fork shaft, for Peugeot 205 with BE3 gearbox since April 1993.
Assignments :- 1.0 XE, XR, Junior catalytic 954cm3 50hp (TU9M/Z) from 04/1993 to 07/1995- 1.1 XE, GE, XL, GL, XR, GR catalytic 1124cm3 60hp (TU1M/Z) from 04/1993 to 07/1995- 1.4 GR, SR, XR Catalyzed 1360cm3 75hp (TU3M/Z) from 04/1993 to 12/1998- 1.6 Automatic Cat 1580cm3 89hp (XU5M/Z) from 08/1993 to 08/1994- 1.8 GLD, GRD, GTD, XLD, XRD, XTD 1769cm3 60hp (XUD7) from 04/1993 to 12/1998- 1.8 Dturbo 1769cm3 78hp (XUD7T) from 04/1993 to 12/1998- 1.9 D 1905cc 65hp (XUD9) from 04/93- 1.9 GTI Catalyzed 1905cm3 122hp (XU9JA/Z) from 04/1993 to 12/1993- 1.9 Gentry 1905cm3 105hp (XU9J1/Z) from 04/1993 to 12/1993

The clutch fork spring for 2CV after 1972 is mounted on the last fork model.

Clutch forkfor Bmw 5 Series: < strong>Bmw Series 5 E34 Sedan: - 520i 150hp phase 1 from 09/1992 to 03/1994 (engine code M50B20TU) With air conditioning only.
- 520i 150hp phase 2 from 04/1994 to 12/1995 (engine code M50B20TU)  With air conditioning only.
- 525i 192hp phase 1 from 05/1990 to 08/1992 (engine code M50B25)   With air conditioning only.
- 525i 192hp phase 1 from 09/1992 to 03/1994 (engine code M50B25TU) With air conditioning only.
- 525i 192hp phase 2 from 04/1994 to 12/1995 (engine code M50B25TU) With air conditioning only.
- 525ix 192hp phase 1 from 04/1991 to 08/1992 (engine code M50B25)
- 525ix 192hp phase 1 from 09/1992 to 03/1994 (engine code M50B25TU)
- 525ix 192hp phase 2 from 04/1994 to 12/1995 (engine code M50B25TU)
- 530i V8 218hp phase 1 from 08/1992 to 03/1994 (engine code M60B30)
- 530i V8 218hp phase 2 from 04 /1994 to 12/1995 (engine code M60B30)  
- 540i V8 286hp phase 1 from 03/1992 to 03/1994 (engine code M60B40)
- 540i V8 286hp phase 2 from 04/1994 to 12 /1995 (engine code M60B40)   
 Bmw Series 5 E34 Touring : < p>- 520i 150hp phase 1 from 09/1992 to 03/1994 (engine code M50B20TU)  With air conditioning only.
- 520i 150hp phase 2 from 04/1994 to 06/1996 (engine code M50B20TU)  With air conditioning only.
- 525i 192hp phase 1 from 12/1990 to 08/1992 (engine code M50B25) With air conditioning only.
- 525i 192hp phase 1 from 09/1992 to 03/1994 (engine code M50B25TU)   ;With air conditioning only.
- 525i 192cv phase 2 from 04/1994 to 06/1996 (engine code M50B25TU)  With air conditioning only.
- 525ix 192cv phase 1 from 07/1991 to 08/1992 (code engine M50B25)
- 525ix 192hp phase 1 from 09/1992 to 03/1994 (engine code M50B25TU)
- 525ix 192hp phase 2 from 04/1994 to 03/1996 (engine code M50B25TU)
- 530i V8 218hp phase 1 from 05/1992 to 03/1994 (engine code M60B30)
- 530i V8 218hp phase 2 from 04/1994 to 06/1996 (engine code M60B30)        
- 540i V8 286hp phase 1 from 05/1993 to 03/1994 (engine code M60B40)
- 540i V8 286hp phase 2 from 04/1994 to 06/1996 (engine code M60B40)     
  

Clutch release fork for Peugeot 205 with XU engine up to 12/89
Suitable for all XU engines with BE1 gearbox with reverse gear on top left, up to December 1989.
Assignments :
- 1.6 GT, XS 1580cm3 89hp[lm1] (XU5M) until 12/1989- 1.6 Automatic 1580cm3 80hp (XU51C) from 08/1985 to 12/1989- 1.6 Automatic 1580cm3 80hp (XU51C) from 08/1987 to 12/1989- 1.6 GTI 1580cm3 105hp (XU5J) from 03/1984 to 12/1986- 1.6 GTI 1580cm3 115hp (XU5JA) from 03/1986 to 12/1986- 1.6 GTI 1580cm3 115hp (XU5JA) from 01/1987 to 12/1989- 1.8 GLD, GRD, SRD 1769cm3 60hp (XUD7) from 09/1983 to 07/1987- 1.8 XLD, XRD, XTD 1769cm3 60hp (XUD7) from 08/1984 to 07/1987- 1.8 GLD, GRD, GTD, XLD, XRD, XTD 1769cm3 60hp (XUD7) from 08/1987 to 12/1989- 1.9 GTI 1905cm3 130hp (XU9JA) from 01/1987 to 12/1989
Cabriolet :- 1.6 CTI 1580cm3 115hp (XU5JA) from 08/1985 to 12/1989- 1.9 CTI Catalyzed 1905cm3 105hp (XU9J1/Z) from 08/1991 to 12/1989

Clutchrelease fork ring for Peugeot 205 with XU engine up to 12/89
This ring is located on the axis of the clutch release fork.
Suitable for all XU engines with BE1 gearbox with reverse gear on the top left, up to December 1989.
Assignments :
- 1.6 GT, XS 1580cm3 89hp[lm1] (XU5M) until 12/1989- 1.6 Automatic 1580cm3 80hp (XU51C) from 08/1985 to 12/1989- 1.6 Automatic 1580cm3 80hp (XU51C) from 08/1987 to 12/1989- 1.6 GTI 1580cm3 105hp (XU5J) from 03/1984 to 12/1986- 1.6 GTI 1580cm3 115hp (XU5JA) from 03/1986 to 12/1986- 1.6 GTI 1580cm3 115hp (XU5JA) from 01/1987 to 12/1989- 1.8 GLD, GRD, SRD 1769cm3 60hp (XUD7) from 09/1983 to 07/1987- 1.8 XLD, XRD, XTD 1769cm3 60hp (XUD7) from 08/1984 to 07/1987- 1.8 GLD, GRD, GTD, XLD, XRD, XTD 1769cm3 60hp (XUD7) from 08/1987 to 12/1989- 1.9 GTI 1905cm3 130hp (XU9JA) from 01/1987 to 12/1989
Cabriolet :- 1.6 CTI 1580cm3 115hp (XU5JA) from 08/1985 to 12/1989- 1.9 CTI Catalyzed 1905cm3 105hp (XU9J1/Z) from 08/1991 to 12/1989

Axe defourchette de 1ère et 2ème vitesse de boite de vitesses 5 rapportspour VOLKSWAGEN Transporter T4 avec code de boite :
- AFK, AFL, EEZ,DXZ, DYA, DQR, FJS, FTV

Clutch fork for Porsche 987 Boxster phase 1 fitted with a 5-speed mechanical gearbox :

- 987 2.7 Boxster phase 1 - 240 hp (M96.25) from 2005 to 2006
- 987 2.7 Boxster phase 1 - 245 hp (M97.20) from 2007 to 2008

Racing-type clutch fork , reinforced
For guided bearings.
Shaft diameter: 20 mm
Length: 200 mm
Supplied bare, without bushes.

For VW Beetle, Karmann-Ghia, type 3, Kübel 181
Years: (11/1971-)

This clutch fork shaft sleeve for Mehari guarantees the rotation of the last model clutch fork shaft.

A worn sleeve prevents the fork from rotating freely on its axis. Be sure to replace both sleeves.

Declutching fork
for guided clutch
Diameter: 16 mm
Length: 222 mm
Supplied alone, without rings.

For VW Combi Bay Window, T2
years 08/1970 ->07/1975
Chassis no. 211 2000 001 ->215 2300 000.

Clutch release bearing guide for Bmw z4:
Bmw z4 E85 Roadster :
- 2.5i 192hp phase 1 from 04/2002 to 11/2005 (engine code M54B25)- 2.5i 177hp phase 2 from 10/2004 to 07/2008 (engine code N52B25)- 2.5si 218hp phase 2 from 10/2004 to 08/2008 (engine code N52B25)- 3.0i 231hp phase 1 from 04/2002 to 11/2005 (engine code M54B30)- 3.0si 265hp phase 2 from 10/2004 to 07/2008 (engine code N52B30)- M 3.2L 343hp phase 2 from 11/2004 to 07/2008 (engine code S54B32)
Bmw z4 E86 Coupé :
- 3.0si 265hp from 10/2005 to 08/2008 (engine code N52B30)- M 3.2L 343hp from 10/2005 to 07/2008 (engine code S54B32)

This clutch fork shaft sleeve for AMI 8 cars after 1970 is designed so the latest gen clutch fork shafts rotate

A worn sleeve prevents the fork from rotating freely on its axis. Make sure you replace both sleeves.

Clutch fork spring
For 20 mm diameter axle

Approximate spring diameter: 40 mm inside / 50 mm outside

For VW Beetle, Karmann-Ghia, Type 3, Kübel 181,
Years: (08/1971-04/1974)

Retaining spring on clutch lever,

For Golf 3:
- 1.9 TDi 90hp (1Z, AHU, ALE)
- 1.9 TDi 110hp (AFN)
- 2.0 150hp (ABF)
- 2.8 VR6 174hp (AAA)

Clutch fork,

For A3 (8L) up to gearbox number 03032:
- 1.8 125 hp (AGN, APG)
- 1.8 Turbo 150 hp (AGU, AQA, ARX, ARZ, AUM)
- 1.8 Turbo 180 hp (AJQ, APP, AUQ)
- 1.9 TDi 90 hp (AGR, ALH)
- 1.9 TDi 100 hp (ATD, AXR)
- 1.9 TDi 110hp (AHF, ASV