Clutch forks

This SASIC clutch fork for PEUGEOT 404 and 504 (04/1962-10/1986 ) is true to original.
Compatible with all Peugeot 404 models, this clutch fork for hydraulic mechanical gearboxes also fits all Peugeot 504 models with 1.8L and 2.0L petrol engines, as well as all Peugeot 505 2.0L petrol and diesel models.
Not suitable for 504 with V6 engine!

Manual clutch cable
guide bracket stop.
Larger diameter (repair).
Original Volkswagen Classic Parts.

For VW Transporter T25 / T3, Bus
Years: 02/1980 ->12/1982
from chassis no. 24A-0073 009->
Engines:
- 1600cc 50hp (CT, CZ)
- 2000cc 70hp (CU)

Declutching fork
for non-guided clutch
Diameter: 16 mm
Length: 222 mm
Supplied alone, without rings.

For Combi Bay Window, T2
years 08/1967 ->07/1970
Chassis no. 218 000 001 ->210 2300 000.

Clutch fork cap for Mazda MX-5:

- NA all models
- NB and NBFL all models

suitable for 5 and 6 speed gearboxes

Original MAZDA part.

Shaft / pin for gearbox bell housing for VOLKSWAGEN LT from 1976 to 1989.

Reinforced Racing clutch fork
For guided bearings.
Shaft diameter: 16mm.

For VW Beetle, Karmann-Ghia, Type 3, Kübel 181,
Years: (08/1970-10/1971)

For A3 (8P) up to ->2007,
up to chassis ->8P-7-089500:
- 1.6 102hp ( BGU, BSE, BSF)
- 1.6 115hp (BAG, BLP, BLF)

For Golf 5 up to ->2007,
up chassis:
->1K-7B084800
->1K-7P015626
->1K-7U015500
->1K-7W102750

Engines:
- 1.4 75hp (BCA)
- 1.4 80hp (BUD)
- 1.4 90hp (BKG, BLN)
- 1.6 102hp (BGU, BSE, BSF)
- 1.6 115/116hp (BAG, BLF, BLP)
- 2.0 SDi 75hp (BDK)

Clutch fork for unguided thrust bearing.
Pin diameter: 16 mm
Length: 200 mm
Supplied bare, without bushes.

- For VOLKSWAGEN Combi Split Brazil (1957-1975)

Clutch fork for unguided thrust bearing.
Pin diameter: 16 mm
Length: 200 mm
Supplied bare, without bushes.

- For VW Beetle, Karmann-Ghia, Type 3 and Kübel 181 (1947-07/1970)
- For VW Combi Split, (1950-07/1967)

Clutch cable end fitting for Porsche 912, 911 and 930

-> Porsche 912 :
- 912 E 2.0 - 90 hp (923.02) of 1976

-> Porsche 911 :
- 911 Tv 2.4 - 130 hp (911.57/67) from 1972 to 1973
- 911 E 2.4 - 165 hp (911.52/62) from 1972 to 1973
- 911 S 2.4 - 190 hp (911.53/63) from 1972 to 1973
- 911 Carrera RS 2.7 - 210 hp (911.83) of 1973
- 911 2.7 - 150 hp (911.92/97/41/46) from 1974 to 1975
- 911 S 2.7 - 175 hp (911.93/98/42/47) from 1974 to 1975
- 911 2.7 - 165 hp (911.81/86) from 1976 to 1977
- 911 Carrera 2.7 - 210 hp (911.83) from 1974 to 1976
- 911 Carrera 3.0 - 200 hp (930.02/12) from 1976 to 1977

-> Porsche 930 :
- 911 Turbo 3.0 - 260 hp (930.50/52) from 1975 to 1977

Clutch fork bushing kit for Peugeot 205 with BE3 gearbox
This kit includes the upper and lower clutch fork shaft bushing.
Suitable for 205 models equipped with BE3 gearbox, with reverse gear down right, from December 1989.

HD clutch shaft with springs, clips and sleeve for VW Combi Bay Window from 08/1967 to 07/1970 with non-guided clutch system.

Clutch fork lever for Mini R50:
Mini R50 Sedan :
- Cooper 1.6L 116hp from 09/2000 to 11/2006 (engine code W10B16)- One 1.6L 90hp from 09/2000 to 11/2006 (engine code W10B16)

Declutching fork
for guided clutch
Diameter: 20 mm
Length: 216 mm
Supplied alone, without rings.

For Combi Bay Window, T2
years 08/1975 ->07/1979
since chassis no. 216 2000 001->

Clutch cable end fitting for all Porsche 914 :

- 914-4 1.7 - 80 hp (022-W) from 1970 to 1973
- 914-4 1.7 - 80 hp (022-EA) from 1972 to 1973
- 914-4 1.7 - 72 hp (022-EB) from 1972 to 1973
- 914-4 1.8 - 85 hp (021-AN) from 1974 to 1976
- 914-4 1.8 - 76 hp (022-EC) from 1974 to 1976
- 914-4 2.0 - 95 hp (039-GA) from 1973 to 1974
- 914-4 2.0 - 100 hp (039-GB) from 1973 to 1976
- 914-4 2.0 - 88 hp (039-GC) from 1975 to 1976
- 914-6 2.0 - 110 hp (901.36/37/38/39) from 1970 to 1972

Clutch fork for Peugeot 205 with BE3 and BE3R gearbox since 04/1993
Supplied with rings and pin
Assignments :- 1.0 XE, XR, Junior catalysed 954cm3 50hp (TU9M/Z) from 04/1993 to 07/1995- 1.1 XE, GE, XL, GL, XR, GR catalytic 1124cm3 60hp (TU1M/Z) from 04/1993 to 07/1995- 1.4 GR, SR, XR Catalyzed 1360cm3 75hp (TU3M/Z) from 04/1993 to 12/1998- 1.6 Automatic Cat 1580cm3 89hp (XU5M/Z) from 08/1993 to 08/1994- 1.8 GLD, GRD, GTD, XLD, XRD, XTD 1769cm3 60hp (XUD7) from 04/1993 to 12/1998- 1.8 Dturbo 1769cm3 78hp (XUD7T) from 04/1993 to 12/1998- 1.9 D 1905cc 65hp (XUD9) from 04/93- 1.9 GTI Catalyzed 1905cm3 122hp (XU9JA/Z) from 04/1993 to 12/1993- 1.9 Gentry 1905cm3 105hp (XU9J1/Z) from 04/1993 to 12/1993

Clutch cable lever on
mechanical fork axis.

For VW Transporter T25/T3, Bus,
Caravelle, Westafalia, Joker
Years: 05/1979 ->12/1982
up to chassis No. ->24-D-051 580.
Engines:
- 1600cc 50hp (CT, CZ)
- 2000cc 70hp (CU)

Clutch control fork axis, supplied alone.

For Transporter T25/T3, 05/1979 ->07/1992
All Petrol engines & Diesel
including Syncro version (4 x 4).

Clutch cable lever
For fork shaft diameter 20 mm.

For VW Beetle, Karmann-Ghia, Type 3, Kübel 181, (08/1971-)
For VW Combi Bay Window, (08/1975-07/1979)