Complete exhaust line

Jet 76.2 mm twin outlet, 70 mm pipe diameter

Jet 76.2 mm twin outlet, 70 mm pipe diameter

JETEX aluminised steel 50 mm exhaust pipe after manifold for Golf 1 cabriolet 08/84 -> 07/92
Comprises: the intermediate pipe in 2 parts, the silencer with 80 mm round outlet, the adaptation pipe for the original pipe (45 mm) and the fastenings.
Not suitable for 1.8 98hp engine (2H) with original manifold and catalytic (different pipe diameter)

Suitable for Scirocco GTI/GTX/Scala 16V from 1984 ->1992

JETEX stainless steel sport exhaust system for Audi A4 (B5) Quattro
For Audi A4 (B5) Quattro : - 1.8 T 150hp and 180hp- 1.9 TDI 90hp, 110hp, 115hp
Entirely in stainless steel, the JETEX line is fitted in place of the original exhaust, retaining the catalytic converter and Lambda probes. This "Catback" line is installed at the catalytic converter outlet.
It consists of the catalytic converter outlet elbow, the intermediate silencer and the 80mm double outlet rear silencer, enabling it to release the noise of your A4 Quattro while maintaining a reasonable sound level for road use. What's more, the Jetex line with intermediate silencer is CE-approved.
The JETEX sports line includes :- Stainless steel rear silencer with 80mm double outlet- Stainless-steel elbow tube and intermediate silencer- Screws and bolts- Gaskets
Can be fitted in place of the original line

SSI Racing exhaust system for Porsche 911 type F and G from 1965 to 1983 :

- Porsche 911 type F :

- 911 2.0 from 1965 to 1967
- 911 2.0 S from 1967
- 911 2.0 T / L / S from 1968
- 911 2.0 T / E / S from 1969
- 911 2.2 T / E / S from 1970 to 1971
- 911 2.4 T / E / S from 1972 to 1973

- Porsche 911 type G :

- 911 2.7 from 1974 to 1977
- 911 S 2.7 from 1974 to 1977
- 911 Carrera 2.7 from 1974 to 1976
- 911 Carrera 3.0 from 1976 to 1977
- 911 SC 3.0 from 1978 to 1983

Please note: except for the 911S, this exhaust system is not suitable for engines with mechanical fuel injection (BOSCH MFI Injection).

For 2.7 and 3.0 models, it will be necessary to add the oil tubes and remove the lower rear panel.

Kit contents :

- Both heat exchangers

DANSK stainless steel exhaust system with twin tailpipes for "Free-flow" conversion for Porsche 911 type G from 1984 to 1989:

- 911 Carrera 3.2 from 1984 to 1989

This kit allows you to connect your silencer directly to the heat exchangers without any modifications. Exhaust silencer tips are weld-on. Exhaust diameter 84mm.

Please note that major modifications to the engine sheet metal are required before installing this kit.

Inoxcargroup N exhaust system for Peugeot 205 Rallye
100% stainless steel exhaust after manifold, top-quality part.
Composed of a central tube without intermediate silencer and a silencer with a 50mm outlet.
center tube and slip-on silencer
Assignments :- 1.3 Rallye 1294cm3 103hp (TU24) from 08/1987 to 07/1992

DANSK stainless steel exhaust system for Porsche 911 type G Carrera 3.2 from 1984 to 1989 :

- 911 Carrera 3.2 from 1984 to 1989

The line includes :
- Heat exchangers

Give your VW the ultimate Old Speed Porsche look with this SEBRING style stainless steel sport exhaust. Dual mufflers and center oval outlet under the skirt. High quality "Vintage Speed" branded workmanship.
Diameter: 43mm
Suitable for original or prepared Type 1 engine due to optimized flow. Anodized finish.

For VW Beetle

4-in-1 Sport exhaust manifold Side winder large-diameter 40 mm (39 mm inside) and special muffler. High-quality SSP stainless steel construction.

For VW Beetle, Karmann-Ghia, Combi Split
with engine type 1: 1300, 1500, 1600
(except 1300 type AR)

SSI GT3 exhaust system for Porsche 911 type F and G from 1965 to 1983 :

- Porsche 911 type F :

- 911 2.0 from 1965 to 1967
- 911 2.0 S from 1967
- 911 2.0 T / L / S from 1968
- 911 2.0 T / E / S from 1969
- 911 2.2 T / E / S from 1970 to 1971
- 911 2.4 T / E / S from 1972 to 1973

- Porsche 911 type G :

- 911 2.7 from 1974 to 1977
- 911 S 2.7 from 1974 to 1977
- 911 Carrera 2.7 from 1974 to 1976
- 911 Carrera 3.0 from 1976 to 1977
- 911 SC 3.0 from 1978 to 1983

For 2.7 and 3.0 models, it will be necessary to add the oil tubes and remove the lower rear panel.

Kit contents :

- Both heat exchangers

Pipe after manifold other than the original - No intermediate silencer - Original Look

Brand: Peugeot
Year: 1986 - 1993
Tube: 57.15 mm
Exhaust type: Original Look

Dune 4-in-1 brushed stainless steel exhaust with heater for VW Buggy.Improved flow for enhanced performance.Using SolidWorks CAD, the EMPI Classic Dune Buggy exhaust features a reconfigured TIG-welded manifold for reduced back pressure AND a smooth sound when cruising or crossing dunes and trails.Supplied with gaskets and screws.

The complete stainless steel line is fitted after the catalytic converter without any modification. The flow is improved and the sound is slightly deeper, perceptible from the outside but not from the inside.
Suitable for VW Transporter T4 from 1996 to 2003:
- 1.9 Turbo-Diesel 68hp (ABL)
- 2.4 Diesel 75hp (AJA)
- 2.4 Diesel 78hp (AAB)
- 2.5 TDi 88hp (AJT/AYY)
- 2.5 102hp (ACV/AUF/AYC/AXL)
- 2.5 151hp (AHY/AXG)