Intermediate exhaust

Tube replacing intermediate silencer in painted steel for Porsche 911 :

- 911 2.7 from 1974 to 1977
- 911 2.7 S from 1974 to 1977
- 911 Carrera 2.7 from 1974 to 1976
- 911 Carrera 3.0 from 1976 to 1977
- 911 3.0 SC from 1978 to 1983
- 911 Carrera 3.2 from 1984 to 1989

For receiving a Lambda sensor (not supplied)
Not approved, reserved for use on a circuit.

Intermediate exhaust between the particle filter (FAP) and the second exhaust intermediate section for a VOLKSWAGEN Transporter T5 in two wheel drive (no 4 motion) :
- 2.5 TDi 131hp (BNZ)
- 2.5 TDi 174hp (BPC)

For Golf 3:
- 1.8 90hp (ADZ) from 08/95 ->09/97

Walkerintermediate exhaust silencer for Peugeot 206 S16 (1999-2004)
High quality part .
Replace your rust-ridden or worn-out muffler with a quality new part.
1 push-fit outlet on catalytic converter side, 1 flanged outlet on silencer side.
Assignments :- 206 S16 - 2.0 16V 1997cm3 137cvs (EW10J4) RFR phase 1 from 08/1999 to 07/2000- 206 S16 - 2.0 16V 1997cm3 138hp (EW10J4) RFN phase 1 from 08/2000 to 07/2002- 206 S16 - 2.0 16V 1997cm3 138hp (EW10J4) RFN phase 2 from 08/2002 to 07/2004

For Golf 3:
- 2.0 GTi 8s 115hp (2E) until ->07/94

Removes the central intermediate silentblock,

For Golf 5:
- 2.0 GTi 200hp

Front exhaust silencer for BMW series 3 E30 Saloon and Coupé with 4-cylinder engine M10B18 not catalyzed:

4-door sedan:
- 316 1.8L 90hp phase 1 from 03/1983 to 08/1987 (engine code M10B18)
- 316 1.8L 90hp phase 2 from 09/1987 to 07/1988 (engine code M10B18)
- 318i 105hp phase 1 from 02/1983 to 08/1987 (engine code M10B18i)

2-door coupe:
- 316 1.8L 90hp phase 1 from 03/1982 to 08/1987 (engine code M10B18)
- 316 1.8L 90hp phase 2 from 09/1987 to 07/1988 (engine code M10B18)
- 318i 105hp phase 1 from 03/1982 to 08/1987 (engine code M10B18i)

ATTENTION: Not suitable for models with catalyst!

Delivered without seal and without screws.

This central monotube intermediate silencer respects the original characteristics of the gas evacuation system of the models concerned.

For Golf 3:
- 1.8 75hp (AAM) from 08/95 ->09/97

For Golf 1:
- 1.6 turbo Diesel 70hp (CY)
- 1.6 GTi 110hp (EG) saloon and cabriolet until ->84
- 1.8 GTi 112hp (DX) saloon and cabriolet until ->84

Stainless steel intermediate silencer

Intermediate silencer for Volkswagen Golf 4 Cabriolet:

Golf 4 cabriolet :

- 1.8 4 cyl 90hp from 06/1998 to 06/2002 (engine code ADZ, ANP)
- 2.0 4 cyl 115hp from 06/1998 to 06/2002 (engine code AGG, AKR, ATU, AWF, AWG)

ATTENTION: Not suitable for Volkswagen Golf 4 Sedan or variant.

Bosalintermediate exhaust silencer for Renault Clio Williams
Quality part allowing you to replace your old rusty or pierced intermediate.
Assignments :- 2.0 Williams B/C57M 1998cm3 150hp (F7R700) phase 1 from 1993 to 1994- 2.0 Williams B/C57M 1998cm3 150hp (F7R700) phase 2 from 1994 to 1996

For Golf 4:
- 1.8 20 valves 150hp (AGU,ARZ from 05/00 to 09/00 and AUM from 11/00)
- 2.3 V5 150hp (AGZ)

For New Beetle:
- 1.8 20 valves 150hp (BKF, AWV, AWU, AVC, APH)
-2.0 115hp (AZJ)

Silencer 2nd intermediate for VW Transporter T4 from 1990 to 1995 with short or long chassis:- 1.9 turbo Diesel (ABL) from 10/92 to 12/95
It will be necessary to recut the pipe if the vehicle is a short chassis.

Dansk Original muffler with polished oval tailpipe for Porsche 924 turbo from 1979 to 1985 :
- 924 2.0 Turbo - 170 hp (M31.01) from 1979 to 1980- 924 2.0 Turbo - 177 hp (M31.03) from 1981 to 1985- 924 2.0 Carrera GT - 210 hp (M31.50) from 1981
Remember to order gasket RS11103 if the one on your car is broken.

For A3 (8L) from 96 ->2003:
- 1.8 125hp (AGN, APG)

2 in 1 Stainless steel SCART Riva pre-silencer for Porsche 911 :

- 911 2.7 from 1975 to 1977
- 911 2.7 S from 1975
- 911 Carrera 2.7 from 1975 to 1976
- 911 Carrera 3.0 from 1976 to 1977
- 911 3.0 SC from 1978 to 1983
- 911 Carrera 3.2 from 1984 to 1989

Mechanically and technically more efficient than the original Porsche muffler, it is ideally matched with the SCART RIVA mufflers of the 911 intheir versions 2.7-3.0 and 3.2 -(RS60017 and RS60008). The final renderingis a real added value to your Porsche, with a hoarse sound, deep and intense, completely "Flat 6"!

The SCART exhausts are made of stainless steel and assembled by hand.
Their construction is 100% French.

Version with threaded hole for lambda probe

Comes with mounting kit including :
- Seals, stainless steel screws, stainless steel lock nuts and high temperature copper grease

POWER PULSE by RACING BEAT mid line for Mazda MX-5 NA

For NA from 1990 to 1995
Straight pipe without silencer

Intermediate tube to be installed in addition to a RACING BEAT MX10273 or MX10274 silencer

Made of stainless steel, diameter 60 mm, this intermediate pipe is called "Africa": A straight pipe without a silencer for fast and efficient gas exhaust!

A gasket supplied for connection to the catalytic converter
If you need a second gasket, get part no.MX10178

BosalExhaust Intermediate for Mercedes 300 CE W124
Quality replacement for your old, rusty or punctured intermediate.
For versions with and without catalytic converter
Assignments :- Mercedes 300 CE 124.050 07/1987 to 08/1989 6 cylinders 3.0L 180hp (M 103.983) Coupé phase 1 - Mercedes 300 CE 124.050 09/1989 to 10/1992 6 cylinders 3.0L 180hp (M 103.983) Coupé phase 2

For New Beetle:
- 1.4 75hp (BCA)
- 1.6 100hp & 102hp (AWH, AYD, BFS)

Central silencer for short wheelbase,
Original quality.

For VW Transporter T4, Multivan,
Caravelle, California, type 7D
Years: 01/1996 ->06/2003
Engines TDI:
- 2.5 TDI 88hp (AJT, AYY)
- 2.5 TDI 102hp (ACV, AUF, AYC)