Intermediate exhaust

Exhaust muffler for Mercedes 280 SE and 280 SEC W111 (1967-1971)
Original type remanufacture
Assignments :- Mercedes 280 SE Coupé 111.024 11/1967 to 05/1971 6 cylinders 2.8L 160hp (M 130.980) Coupé- Mercedes 280 SE Cabriolet 111.025 11/1967 to 05/1971 6 cylinders 2.8L 160hp (M 130.980) Cabriolet

Intermediate silencer for Volkswagen Golf 4 Cabriolet:

Golf 4 cabriolet :

- 1.8 4 cyl 90hp from 06/1998 to 06/2002 (engine code ADZ, ANP)
- 2.0 4 cyl 115hp from 06/1998 to 06/2002 (engine code AGG, AKR, ATU, AWF, AWG)

ATTENTION: Not suitable for Volkswagen Golf 4 Sedan or variant.

Exhaust intermediate for Peugeot 205 with TU engine (see assignments below)Brand-new, original-qualitypart to replace your old intermediate, oxidized and perforated by wear.

Assignments :- 1.0 XL, GL, Junior 954cm3 45hp (TU9) from 08/1987 to 07/1992- 1.1 GL, XL, GR, XR 1124cm3 55hp (TU1) from 08/1987 to 07/1992- 1.4 GR, SR, XR 1360cm3 65hp (TU3) from 08/1987 to 07/1988- 1.4 GR, SR, XR 1360cm3 69hp (TU3A) from 08/1988 to 07/1990

Front exhaust silencer for BMW series 3 E30 Saloon and Coupé with 4-cylinder engine M10B18 not catalyzed:

4-door sedan:
- 316 1.8L 90hp phase 1 from 03/1983 to 08/1987 (engine code M10B18)
- 316 1.8L 90hp phase 2 from 09/1987 to 07/1988 (engine code M10B18)
- 318i 105hp phase 1 from 02/1983 to 08/1987 (engine code M10B18i)

2-door coupe:
- 316 1.8L 90hp phase 1 from 03/1982 to 08/1987 (engine code M10B18)
- 316 1.8L 90hp phase 2 from 09/1987 to 07/1988 (engine code M10B18)
- 318i 105hp phase 1 from 03/1982 to 08/1987 (engine code M10B18i)

ATTENTION: Not suitable for models with catalyst!

Delivered without seal and without screws.

This central monotube intermediate silencer respects the original characteristics of the gas evacuation system of the models concerned.

For Corrado,
from chassis 50-N-000001-> :
- 1.8 16s 136hp (KR)
- 2.0 16s 136hp (9A)

Bosal exhaust line after manifold for Peugeot 205 Diesel.
Fits in place of the original.

Assignments :
- Peugeot 205 Diesel 1.8 GLD, GRD, GTD, XLD, XRD, XTD 1769cm3 60hp (XUD7) from serial number 7104861

For Golf 1:
- 1.6 Turbo Diesel 70hp (CY)

Exhaust muffler for Mercedes SL Pagode W113 all models
Original type remanufacture
Assignments :- Mercedes 230 SL 113.042 07/1963 to 01/1967 6 cylinders 2.3L 150hp (M 127.981) Cabriolet- Mercedes 250 SL 113.043 12/1966 to 01/1968 6 cylinders 2.5L 150hp (M 129.982) Cabriolet- Mercedes 280 SL 113.044 01/1968 to 03/1971 6 cylinders 2.8L 170hp (M 130.983) Cabriolet

Central exhaust for VOLKSWAGEN Transporter T4, to be shortened for short wheelbase models:
- 2.5 Petrol 110hp (AAF, ACU, AEN)

For Golf 2 without catalytic converter:
- 1.8 84hp and 90hp (RH and RP) since 11/87->
- 1.8 GTi 8v 112hp (PB) since 07/87->

Stainless steelintermediate exhaust for VW Transporter T25 / T3 (11/1985 to 07/1992).No more rusty exhausts with this stainless steel intermediate.

This stainless steel exhaust hose for Citroën DS (1965/1975) - 59cm is of superior quality.

This intermediate exhaust hose for DS is made of stainless steel braid. It is compatible with all DS20, 21 and 23 sedan and station wagon models from 1965.

Dansk Original muffler with polished oval tailpipe for Porsche 924 turbo from 1979 to 1985 :
- 924 2.0 Turbo - 170 hp (M31.01) from 1979 to 1980- 924 2.0 Turbo - 177 hp (M31.03) from 1981 to 1985- 924 2.0 Carrera GT - 210 hp (M31.50) from 1981
Remember to order gasket RS11103 if the one on your car is broken.

2 in 1 Stainless steel SCART Riva pre-silencer for Porsche 911 :

- 911 2.7 from 1975 to 1977
- 911 2.7 S from 1975
- 911 Carrera 2.7 from 1975 to 1976
- 911 Carrera 3.0 from 1976 to 1977
- 911 3.0 SC from 1978 to 1983
- 911 Carrera 3.2 from 1984 to 1989

Mechanically and technically more efficient than the original Porsche muffler, it is ideally matched with the SCART RIVA mufflers of the 911 intheir versions 2.7-3.0 and 3.2 -(RS60017 and RS60008). The final renderingis a real added value to your Porsche, with a hoarse sound, deep and intense, completely "Flat 6"!

The SCART exhausts are made of stainless steel and assembled by hand.
Their construction is 100% French.

Version with threaded hole for lambda probe

Comes with mounting kit including :
- Seals, stainless steel screws, stainless steel lock nuts and high temperature copper grease

2 in 1 Pre-silencer SCART stainless steel bypass for Porsche 911 :

- 911 2.7 from 1975 to 1977
- 911 2.7 S from 1975
- 911 Carrera 2.7 from 1975 to 1976
- 911 Carrera 3.0 from 1976 to 1977
- 911 3.0 SC from 1978 to 1983
- 911 Carrera 3.2 from 1984 to 1989

You are eager to release the sound of your Flat 6 at 100%, optimize the engine performance of your Porsche, this Racing Super Sound version of this pre-silencer is made for you! Recommended to be mounted with the SCART RIVA 911 2.7, 3.0 and 3.2, you will be at the height of what can offer your Porsche in terms of sound emotion.
However, in use, it remains pleasant because it knows how to remain discreet on normal use.

The SCART exhausts are made of stainless steel and assembled by hand.

Their construction is 100% French.

Version with threaded hole for lambda probe

Comes with mounting kit including :
- Seals, stainless steel screws, stainless steel lock nuts and high temperature copper grease

This stainless steel exhaust hose for Citroën ID (1965/1975) - 59cm is of superior quality.

This intermediate exhaust hose for ID is made of stainless steel braid. It is compatible with all 20 and 21 sedan and station wagon models from 1965.

Intermediate exhaust silencer for Peugeot 205 GTI, CTI and Gentry
Can be fitted in place of the original, for all models with catalytic converter flange.

Assignments :- 1.9 GTI Catalysée 1905cm3 122hp (XU9JA/Z) from 08/1992 to 12/1993- 1.9 Gentry 1905cm3 105hp (XU9J1/Z) from 08/1991 to 12/1993
Cabriolet :- 1.9 CTI Catalyzed 1905cm3 105hp (XU9J1/Z) from 08/1991 to 12/1993

ForA3 (8L) from 96 ->2003:
- 1.6 101hp (AEH, AKL, APF)
- 1.6 102hp (AVU, BFQ)

For A3 (8L) from 96 ->2003:
- 1.8 125hp (AGN, APG)

For A3 (8L) from 96 ->2003:
- 1.9 TDi 90hp (AGR, ALH)
- 1.9 TDi 100hp (ATD, AXR)
- 1.9 TDi 110hp (ATD, AXR)
- 1.9 TDi 130hp (ASZ)