Stabiliser bar

For Golf 1, Golf 1 cabriolet and Jetta 1 all models
(except Golf 1 Caddy)

Diameter of front bar: 22 mm
Diameter of rear bar: 26 mm
Silentblocs included (clamps not supplied)

The anti-roll bars contribute to improving the handling of your vehicle.
They can be fitted with both original suspension and a more sporty suspension (short springs, threaded kits)

For Golf 3 (except break and Syncro):
- 2.0 16v 150hp (ABF)
- 2.8 VR6 174hp (AAA)

For Corrado:
- 2.9 VR6 190hp (ABV)

Diameter of front bar: 25 mm
Diameter of rear bar: 25 mm

The anti-roll bars contribute to improving the handling of your vehicle.
They can be fitted with both original suspension and a more sporty suspension (short springs, threaded kits)

4 clamps + 4 silentblocks for the 2 sides
Original type quality parts.

For Old Beetle & Karmann-Ghia 1200, 1300, 1500 from 08/65->

Bracket for fastening the front axle stabiliser ontransverse control arm. This item is suitable for: Golfmanufactured in 75-84 Caddy manufactured in 83-92 GolfConvertible manufactured in 79-93 Jetta manufactured in80-84 Scirocco manufactured in 74-92u.a. Golf 1 GTI and Cabrio, Caddy 1, some SciroccoClamp for front axle, outsidereplacement for 171 411 333

Rubber silent block mounted on linker arm for the rear trumpet suspension anti-roll bar. Left or right side, sold individually.

For VOLKSWAGEN Combi Split Brazil (1957-1975)

Insert bushing on the silent block for the rear sway bar arm
sold individually, requires one per side
Diameter: 12 mm
Length: 32 mm

For VW Beetle & Karmann-Ghia, type14
Years: since 08/1966->
Models: 1200, 1300, 1500.
Chassis: from No. 117 000 001->

Rubber guide ring on the push rod of the anti-roll bar of the rear axle with housing. Left or right side, sold individually.

For VW Beetle & Karmann-Ghia, type14
Years: since 08/1966->
Models: 1200, 1300, 1500.
Chassis: from No. 117 000 001->

These reinforced models located on the front axle sway bar link rods (see No. 3 on the diagram) offer better guidance under pressure as well as greater durability compared with the original part

For E30:
- All models except M3 & 325 iX (4x4)

For E36 from 10/91->:
- 316 i, 318 i (M40, M43)
- 318 tds
- 320 i, 323 i, 328 i (M50, M52)
-325 td/tds (M51)

Inside silent block cover support on the link arm of the anti-roll bar of the rear axle with housing. Left or right side, sold individually.

For VW Beetle & Karmann-Ghia, type14
Years: since 08/1966->
Models: 1200, 1300, 1500.
Chassis: from No. 117 000 001->

Rear stabilizer bar mounting bracket for Porsche 911 type G from 1978 to 1989 :

- 911 SC 3.0 from 1978 to 1983
- 911 Carrera 3.2 from 1984 to 1989
- 911 Turbo 3.3 from 1978 to 1989

This bracket is sold individually, and two quantities are required per vehicle.

For Corrado all models except VR6

Diameter of front bar: 22 mm
Diameter of rear bar: 25 mm

The anti-roll bars contribute to improving the handling of your vehicle.
They can be fitted with both original suspension and a more sporty suspension (short springs, threaded kits)

Stabilizer bar bracket to weld on longitudinal reinforcement for Porsche 911 type F from 1972 to 1973 :
- 911 2.4 T / E / S from 1972 to 1973- 911 2.7 Carrera RS from 1973
Part in black storage paint, to be primed after welding and painted according to the rules of the art of bodywork restoration.

Includes the sway bar with bushes and end links, reinforced MEYLE HD German quality, for 3- or 5-door Golf 5 with equipment code PR-0AD
(Not for Golf Plus)

Rear stabilizer bar silentblock for Mini with sport suspension :
Mini R56 :
- Cooper S 1.6L 175hp from 11/2005 to 07/2010 (engine code N14B16)- Cooper S JCW 1.6L 211hp from 11/2007 to 07/2010 (engine code N14B16)- Cooper S 1.6L 184hp from 07/2009 to 11/2013 (engine code N18B16)- Cooper S JCW 1.6L 211hp from 11/2011 to 11/2013 (engine code N18B16)- Cooper S JCW 1.6L 211hp from 01/2010 to 06/2012 (engine code N14B16)- Cooper SD 2.0L 143hp from 06/2009 to 11/2013 (engine code N47C20)- Cooper D 1.6L 112hp from 05/2009 to 11/2013 (engine code N47C16)- Cooper D 2.0L 112hp from 08/2010 to 11/2013 (engine code N47C20)- One D 1.6L 90hp from 05/2009 to 11/2013 (engine code N47C16)
Mini R57:
- Cooper 1.6L 120hp from 10/2007 to 06/2010 (engine code N12B16)- Cooper S 1.6L 175hp from 11/2007 to 07/2010 (engine code N14B16)- Cooper S JCW 1.6L 211hp from 08/2008 to 07/2010 (engine code N14B16)- Cooper 1.6L 122hp from 09/2009 to 06/2015 (engine code N16B16)- Cooper S 1.6L 184hp from 06/2009 to 06/2015 (engine code N18B16)- Cooper S JCW 1.6L 211hp from 01/2010 to 07/2012 (engine code N14B16)- Cooper S JCW 1.6L 211hp from 01/2012 to 05/2015 (engine code N18B16)- Cooper SD 2.0L 143hp from 06/2009 to 05/2015 (engine code N47C20)- Cooper D 1.6L 112hp from 05/2009 to 05/2015 (engine code N47C16)- Cooper D 2.0L 112hp from 11/2010 to 05/2015 (engine code N47C20)- One 1.6L 98hp from 09/2009 to 06/2015 (engine code N16B16)
Quantity required per vehicle: 2.
This product is sold individually.

These reinforced models located in the centre of the front axle sway bar (see No. 2 on the diagram) offer better guidance under pressure as well as greater durability compared with the original part

For E36 Saloon & Coupé:
- M3 S50

For Z3 Coupé & Roadster:
- Z3 M S50 & S54

Suitable for standard chassis :
- E36 except Compact and M3 from 1990 ->2000
- E34 for rear stabilizer bar

Stabilizer barbearing for Peugeot 205
Stabilizer bar diameter: 22mm
For all models except GTI, Rallye and Dturbo Turbo Diesel
Assignments :- 1.0 GL, GE, XL, XE, Junior 954cm3 45hp (XV8) from 02/1983 to 07/1987- 1.0 XL, GL, Junior 954cm3 45hp (TU9) from 08/1987 to 07/1992- 1.0 XE, XR, Junior catalyzed 954cm3 50hp (TU9M/Z) from 08/1992 to 07/1995- 1.1 GL, GR, XL, XR 1124cm3 50hp (XW7) from 02/1983 to 07/1987- 1.1 GL, XL, GR, XR 1124cm3 55hp (TU1) from 08/1987 to 07/1992- 1.1 XE, GE, XL, GL, XR, GR catalysed 1124cm3 60hp (TU1M/Z) from 08/1992 to 07/1995- 1.4 GR, SR, XR 1360cm3 60hp (XY7) from 02/1983 to 07/1987- 1.4 GT, XT, XS 1360cm3 80hp (XY8) from 02/1983 to 07/1987- 1.4 GR, SR, XR 1360cm3 65hp (TU3) from 08/1987 to 07/1988- 1.4 GR, SR, XR 1360cm3 69hp (TU3A) from 08/1988 to 07/1990- 1.4 GR, SR, XR 1360cm3 75hp (TU3F2) from 08/1990 to 07/1992- 1.4 GR, SR, XR Catalyzed 1360cm3 75hp (TU3M/Z) from 08/1992 to 12/1998- 1.4 GT, XS 1360cm3 85hp (TU3S) from 08/1987 to 07/1992- 1.6 GT, XS 1580cm3 89hp[lm1] (XU5M) from to 07/1992- 1.6 GT, XS 1580cm3 89hp (XU5M/Z) from 08/1992 to 07/1993- 1.6 Automatic 1580cm3 80hp (XU51C) from 08/1985 to 07/1987- 1.6 Automatic 1580cm3 80hp (XU51C) from 08/1987 to 07/1993- 1.6 Automatic catalysed 1580cm3 89hp (XU5M/Z) from 08/1993 to 08/1994- 1.8 GLD, GRD, SRD 1769cm3 60hp (XUD7) from 09/1983 to 07/1987- 1.8 XLD, XRD, XTD 1769cm3 60hp (XUD7) from 08/1984 to 07/1987- 1.8 GLD, GRD, GTD, XLD, XRD, XTD 1769cm3 60hp (XUD7) from 08/1987 to 12/1998

Peugeot 205 Cabriolet :- 1.1 CJ 1124cm3 55hp (TU1) from 08/1987 to 07/1992- 1.1 CJ Catalysée 1124cm3 60hp (TU1M/Z) from 08/1992 to 07/1995- 1.4 CT 1360cm3 80hp (XY8) from 07/1986 to 07/1987- 1.4 CJ 1360cm3 65hp (TU3) from 08/1987 to 07/1988- 1.4 CJ 1360cm3 69hp (TU3A) from 08/1988 to 07/1990- 1.4 CJ 1360cm3 75hp (TU3F2) from 08/1990 to 07/1992- 1.4 Cabriolet 1360cm3 75hp (TU3M/Z) from 08/1992 to 07/1995

Front stabilizer bar bracket for Renault 5

For Renault 5 :
- Renault 5 L (R1220) from 01/1972 to 12/1976 - Billancourt 782cm3 36hp (839-01)
- Renault 5 L (R1221/R1391) from 01/1977 to 12/1983 - Billancourt 845cm3 38hp (800-710)
- Renault 5 LS (R1224) from 04/1974 to 06/1975 - Cléon Fonte 1289cm3 64hp (810-725)
- Renault 5 TS (R1224/R1394) from 07/1975 to 12/1984 - Cléon Fonte 1289cm3 64hp (810-725)
- Renault 5 TL (R1222/R1392) from 01/1972 to 12/1984 - Cléon Fonte 956cm3 46hp (689-710)
- Renault 5 TL (R1227/R1397) from 07/1979 to 12/1984 - Cléon Fonte 1108cm3 45hp (688-713)
- Renault 5 GTL (R1225) from 02/1976 to 06/1979 - Cléon Fonte 1289cm3 64hp (810-726)
- Renault 5 GTL (R1226/R1395) from 07/1979 to 12/1984 - Cléon Fonte 1108cm3 45hp (688-713)
- Renault 5 TX (R1229/R1399) from 09/1981 to 12/1984 - Cléon Fonte 1397cm3 63hp (C2J-713)
- Renault 5 Alpine (R1223) from 03/1976 to 08/1981 - Cléon Fonte 1397cm3 93hp (840-725)
- Renault 5 Alpine Turbo (R122B) from 09/1981 to 12/1984 - Cléon Fonte 1397cm3 110hp (840-726)
- Renault 5 1300 Automatic (R1225/R1395) from 01/1978 to 01/1981 - Cléon Fonte 1289cm3 64hp (810-729)
- Renault 5 1400 Automatic (R1229/R1399) from 02/1981 to 12/1984 - Cléon Fonte 1397cm3 63hp (847-712)
- Renault 5 TX Automatic (R1229/R1399) from 02/1981 to 12/1984 - Cléon Fonte 1397cm3 63hp (847-712)
- Renault 5 Turbo (R8220) from 06/1980 to 06/1982 - Cléon Fonte 1397cm3 160hp (840-730)
- Renault 5 Turbo 2 (R8220) from 07/1982 to 04/1986 - Cléon Fonte 1397cm3 160hp (840-730)

For 10mm front stabilizer bar
Original quality

Silentblock of rear stabilizer bar 16mm for MINI III R57,R57LCI Convertible,R58 Coupeand R59 Roadster with standard suspension only :

R57 Convertible:
- Cooper 1.6L 120hp from 10/2007 to 06/2010 (engine code N12B16)
- Cooper S 1.6L 175hp from 11/2007 to 07/2010 (engine code N14B16)
- Cooper S JCW 1.6L 211hp from 08/2008 to 07/2010 (engine code N14B16)

R57LCI Convertible :
- Cooper 1.6L 122hp from 09/2009 to 06/2015 (engine code N16B16)
- Cooper S 1.6L 184hp from 06/2009 to 06/2015 (engine code N18B16)
- Cooper S JCW 1.6L 211hp from 01/2010 to 07/2012 (engine code N14B16)
- Cooper S JCW 1.6L 211hp from 01/2012 to 05/2015 (engine code N18B16)
- Cooper SD 2.0L 143hp from 06/2009 to 05/2015 (engine code N47C20)
- Cooper D 1.6L 112hp from 05/2009 to 05/2015 (engine code N47C16)
- Cooper D 2.0L 112hp from 11/2010 to 05/2015 (engine code N47C20)
- One 1.6L 98hp from 09/2009 to 06/2015 (engine code N16B16)

R58 Coupe :
- Cooper 1.6L 122hp from 12/2010 to 04/2015 (engine code N16B16)

R59 Roadster :
- Cooper 1.6L 122hp from 01/2011 to 04/2015 (engine code N16B16)
- Cooper S 1.6L 184hp from 01/2011 to 04/2015 (engine code N18B16)
- Cooper S JCW 1.6L 211hp from 05/2011 to 06/2012 (engine code N14B16)
- Cooper S JCW 1.6L 211hp from 01/2012 to 04/2015 (engine code N18B16)
- Cooper SD 2.0L 143hp from 01/2011 to 04/2015 (engine code N47C20)

WARNING: Not suitable for sport suspension!

Quantity needed per vehicle: 2

This product is sold individually.