Valve

These intake valves for Type 4 1.7, 1.8 and 2.0 L 39x8mm engines - set of 4 are top-quality.

Made in Europe, these intake valves for cox and combi type 4 engines are perfectly faithful to the original dimensions.
Sold in sets of 4, they provide the air/fuel mixture for each of the 2 cylinder heads.

Head diameter: 39 mm
Tail diameter: 8 mm

For T2, T25, T3, 412, Type 4 engines :
- 1700cc 62hp (CE 08/71->)
- 1700cc 66hp (CA, CB, 08/71 ->12/73)
- 1700cc 80hp (W 08/69 ->250 000)
- 1700cc 80hp (EA 08/71 ->098 793)
- 1700cc 80hp (EB 08/71 ->010 020)
- 1800cc 68hp (AP 027 466 ->055 000)
- 1800cc 70hp (ED 000 640 ->025 000)
- 2000cc 70hp (CU,CV since 05/79->)

For Audi 80 (89, 8A) :
- 1.9 D (1Y)
- 1.9 TD (AAZ)

For Audi 100 (44) :
-2.4 D (3D)

For Audi 100 (4A) :
- 2.4 D (AAS)

Exhaust valve for Peugeot 205 Phase 1, Phase 2 and utility Diesel from August 1983

This exhaust valve for Peugeot 205 is compatible with models from August 1983.

Exhaust valve diameter: 33 mm
Number of notches: 1

Fits on:
Peugeot 205 Phase I Diesel, 3 and 5-door versions
- 205 1.7 L Diesel - 60hp from 08/1983 to 10/1987

Peugeot 205 Phase II Diesel, 3 and 5-door versions
- 205 1.7 L Diesel - 60hp from 07/1987 to 09/1998
- 205 1.9 L Diesel - 69hp from 08/1987 to 06/1994

Peugeot 205 Cargo Diesel
- 205 Van 1.7 L Diesel - 60hp from 03/1994 to 05/1997

For Transporter T3 / T25:
- 1.9 WBX 60hp (DF)

FEBI BILSTEIN intake valve for Peugeot 205 Petrol 1.0 L - Diameter 34.8 mm

This intake valve for Peugeot 205 is only suitable for the Phase 2 1.0 L petrol models shown below.

Valve head diameter: 34.8 mm
Number of notches: 3

Fits on :

Peugeot 205 Phase II, 3 and 5-door versions

- 205 1.0 L - 45hp from 10/1987 to 09/1998
- 205 1.0 L - 50hp from 08/1992 to 05/1997

These 3 groove valve blocking rings for Mehari are sold in pairs.

The purpose of these valve cotters is to transmit the tension of the valve spring to the valves.

They are compatible with Mehari intake and exhaust valves.

Genuinelarge "outside" valvespring for Volkswagen Golf 1 with mechanical tappets:
- 1.5 65hp (GH)- 1.5 70hp (JB)- 1.6 D 54hp (CR, JK)- 1.6 TD 70hp (CY)- 1.6 75hp (EM, EW, HN)- 1.6 85hp (FR)- 1.6 GTi 110hp (EG)- 1.7 78hp (EN)- 1.8 GTi 112hp (DX)
Need 8 quantities per engine.
This product is sold individually.
OEM part number: 078 109 623 A
Original VW Classic Parts.

Set of 4 valves
For engine: Type 1
Length: 112 mm
Inlet or exhaust mounting

For Golf 2:
- 1.8 16s 129/139hp (KR, PL)

This intake valve for Mehari (10/1968-07/1987) - 40x88.5x8mm is identical to the original.

This valve for 2cv is specific to the 2cv and its derivatives with 602cc engines and ensures the intake for each of the 2 cylinder heads.

This 435cc engine intake valve for 2cv and derivatives is identical to the original.

It is specific to the 2cv and derivatives with 435cc engines and ensures the fresh air intake of each of the 2 cylinder heads.

Exhaust valve FEBI BILSTEIN for Peugeot 205 Cabriolet and Phase 2 Petrol from June 1987

This exhaust valve for Peugeot 205 is only suitable for the models listed below from 1987.

Exhaust valve diameter: 29.4 mm
Number of notches: 3

Fits on :

Peugeot 205 Phase II Petrol, 3 and 5-door versions

- 205 1.0 L - 45hp from 10/1987 to 09/1998
- 205 1.0 L - 50hp from 08/1992 to 05/1997
- 205 1.1 L - 54hp from 10/1987 to 10/1990
- 205 1.1 L - 60hp from 07/1989 to 09/1998
- 205 Rallye 1.3 L - 101hp from 10/1987 to 10/1990
- 205 1.4 L - 67hp from 10/1987 to 10/1990
- 205 1.4 L - 68hp from 08/1990 to 07/1992
- 205 1.4 L - 75hp from 07/1988 to 09/1998
- 205 1.4 L - 75hp from 08/1990 to 07/1998
- 205 1.4 L - 84hp from 06/1987 to 12/1989
- 205 1.4 L catalyzed - 60hp from 08/1987 to 09/1993

Peugeot 205 Cabriolet

- 205 1.1 L - 54hp from 08/1987 to 12/1994
- 205 CJ 1.1 L - 60hp from 10/1989 to 12/1994
- 205 1.4 L - 68hp from 08/1987 to 07/1990
- 205 1.4 L - 84hp from 08/1987 to 06/1994
- 205 CJ 1.4 L - 67hp from 03/1989 to 12/1994
- 205 CJ 1.4 L - 75hp from 05/1991 to 12/1994
- 205 CJ 1.4 L catalyzed - 60hp from 01/1989 to 09/1993

Peugeot 205 Cargo Petrol

- 205 1.1 L - 60hp from 08/1990 to 05/1997

Dimensions: 39.5 x 7 x 91.9 mm
Sold individually

For VW Transporter T4type 7D:
- 2.0 84hp (AAC)

For 1.9 TDi 1Z 90hp and AFN 110hp engines from 04/96->:
- 90hp type 1Z from engine no. 770 001->
(+ALH/AHU/ALE/AHH/AGR)
- 110hp type AFN from engine no. 002 001->
(+AVG/AHF/ASV)

Concernsthe following vehicles:
- Audi A3 8L 09/96 ->05/03
- Audi A48D/8E 04/96 ->11/04
- Audi 100 4A 04/96 ->01/97
- Audi A6 4B 02/97 ->04/04

- VW Golf 3 and Vento 04/96 ->08/97
- VW Golf 4 and Bora 10/97 ->10/03
- VW Passat 3 35 04/96 ->09/96
- VW Passat 4 3B 10/96 ->11/00
- VW New Beetle 9C 01/98->
- VW Sharan 7M 03/96 ->03/00

- Seat Ibiza 6K1 04/96 ->02/02
- Seat Toledo 09/96 ->08/05
- Seat Leon 04/99 ->08

Inlet valve
Dimensions: 96.85 x 8 mm
5 required, sold per unit.

For VW Transporter T4, Multivan,
Bus, California, 01/1996 ->06/2003
with Engines:
- 2.5 TDI 88hp (AYY, AJT)
- 2.5 TDI 102hp (ACV, AYC, AUF)
- 2.5 TDI 151hp(AXG, AHY)

Set of 4 38x107,2x8mm exhaust valves for BMW 5 series E12:

- 525 6cyl 145hp phase 1 from 06/1973 to 08/1976 (engine code M30B25)
- 525 6cyl 150hp phase 2 from 05/1976 to 06/1981 (engine code M30B25)
- 528 6cyl 165hp phase 1 from 11/1974 to 08/1976 (engine code M30B28)
- 528 6cyl 170hp phase 2 from 03/1976 to 09/1977 (engine code M30B28)
- 528i 6cyl 177hp phase 2 from 01/1977 to 02/1978 (engine code M30B28i)
- 528i 6cyl 184hp phase 2 from 02/1978 to 06/1981 (engine code M30B28i)
- M535i 6cyl 3.5L 218hp from 04/1980 to 05/1981 (engine code M90-S30B35LE)

Technical specifications :
- Head diameter: 38mm
- Stem diameter: 8mm
- Length: 107.2mm
- Thrust angle: 45
- Shank type: 3 grooves

Quantity required: 6

This product is sold in packs of 4

Inlet valve for Citroën traction 11hp type 11D since May 1955.
Dimension: 37x9x108.5mm
Compatible models:- Traction Avant 11C Commercial 11 "Performance", type 11B from 05/1955 to 1957, Engine, type 11cv D 1911cc (59hp)- Traction Avant 11BL Berline 4 portes 11 "légère" "Performance", type 11BL from 05/1955 to 02/1956, Engine, type 11cv D 1911cc (59cv)- Traction Avant 11B Berline 4 portes 11 "Performance", type 11B de 05/1955 à 07/1957, Moteur, type 11cv D 1911cc (59cv)

Set of 4 34x102.5x7mmexhaust valves for BMW 5 series E12 and E28 with M20 engine:

E12 :
- 520-6 6cyl 122hp phase 2 from 08/1977 to 06/1981 (engine code M20B20)

E28 :
- 520i 6cyl 125hp from 11/1980 to 12/1987 (engine code M20B20)
- 525e 6cyl 2.7L 125hp from 11/1982 to 11/1986 (engine code M20B27)

ATTENTION: Not suitable for E28 525e produced from 12/1986 (head diameter is 36mm not 34mm)!

Technical specifications:
- Head diameter: 34mm
- Stem diameter: 7mm
- Length: 102.5mm
- Angle of reach: 45
- Shank type: 3 grooves

This product is sold in packs of 4

For Golf 1 and Scirocco from 1979 ->1984:
- 1.1 50hp (GG)
- 1.3 60hp (GF)

For Polo type 86 and 86C:
- 0.9 40hp (HA)
- 1.1 50hp (HB)
- 1.3 60hp (HH)

32 mm head, 8 mm stem