Motor support

This gearbox support plate for AMI6 and AMI8 - Stainless Steel is a spacer.

Made of stainless steel, it is mounted on each side of the gearbox mount.

This engine mount for DYANE 4 (03/1968-08/1975) is faithful to the original.

Identic on the right and left, this silent engine block for Dyane 4 is specific to 435cc engines.The threads are longer to allow a correct tightening on the thicker casting of this type of engine.

Compatible model:

- DYANE 4 type AYA2: 03/1968 to 08/1975

The gearbox mount for DYANE and Acadiane is compatible with all DYANE and Acadiane models.

Mounted at the end of the gearbox, this bi-material support acts as a silent block and limits the spread of vibrations from the drive train into the body.

Remember to change the motor mounts as well.

This gearbox support plate for Mehari - Stainless Steel is a spacer.

Made of stainless steel, it is mounted on each side of the gearbox mount.

This engine mount for 2cv Fourgonnette AZU-B (01/1972-03/1978) is faithful to the original.

Identic right and left, this silent engine block for 2CV AZU-B is specific to 435cc engines. The threads are longer to allow a correct tightening on the thicker casting of this type of engine.

Compatible model:

- 2CV AZU 250 type AZU-B/AK-AP: 01/1972 to 03/1978

The gearbox mount for 2CV Van is compatible with all 2cv models and derivatives.

Mounted at the end of the gearbox, this bi-material support acts as a silent block and limits the spread of vibrations from the drive train into the body.

Remember to change the motor mounts as well.

This gearbox support plate for DYANE and Acadiane - Stainless Steel is a spacer.

Made of stainless steel, it is mounted on each side of the gearbox mount.

This engine mount for 2cv4 (02/1970-09/1978) is faithful to the original.

Identic on the right and left, this silent engine block for 2CV4 is specific to the 435cc engines.The threads are longer to allow proper tightening on the thicker castings of this type of engine.

Compatible model:

- 2CV 4 type AZ KB/A2: 02/1970 to 09/1978

The gearbox mount for 2cv is compatible with all 2cv models and derivatives.

Mounted at the end of the gearbox, this bi-material support acts as a silent block and limits the spread of vibrations from the drive train into the body.

Remember to change the engine mounts as well.

This gearbox support plate for 2cv before 1970 - Stainless Steel is a spacer.

Made of stainless steel, it is mounted on each side of the gearbox mount.

Engine mount left or right For Citroën DS from June 1959.
Restore your engine's stability with this new engine silentblock for Citroën DS. This engine silentblock provides vibration damping and optimum support for the drivetrain.It guarantees excellent durability and driving comfort, true to the DS DNA.
It is advisable to change the 2 sides at the same time to preserve balance.

Engine mount left or right For Citroën ID from June 1959.
Restore stability to your engine with this new engine silentblock for Citroën ID. This engine silentblock provides vibration damping and optimum support for the drivetrain.It guarantees excellent durability and preserved driving comfort, true to the DS DNA.
It is advisable to change the 2 sides at the same time to preserve balance.

Rear engine mount for Renault 8

For Renault 8:
- Renault 8 (R1130) from 09/1962 to 08/1967 - Sierra 956cm3 48hp (689-01)
- Renault 8 Major (R1132) from 02/1964 to 09/1965 - Sierra 1108cm3 50hp (688-02)
- Renault 8 Major (R1132) from 09/1967 to 08/1973 - Sierra 1108cm3 50hp (688-02)
- Renault 8 S (R1136) from 09/1968 to 09/1971 - Sierra 1108cm3 60hp (688-09)
- Renault 8 Gordini (R1134) from 10/1964 to 09/1966 - Sierra 1108cm3 95hp (804)
- Renault 8 Gordini (R1135) from 06/1966 to 08/1970 - Sierra 1255cm3 103hp (812-00)
- Renault 8 Automatique (R1130) from 09/1962 to 09/1963 - Sierra 956cm3 48hp (689-01)
- Renault 8 Automatic (R1132) from 09/1968 to 08/1973 - Sierra 1108cm3 50hp (688-06)

Original-quality engine mount on crossmember

This gearbox support plate for 2cv and derivatives - Stainless Steel is a spacer.

Made of stainless steel, it is mounted on each side of the gearbox mount.

IMPERGOM lower right engine mount for Peugeot 205
This rubber-metal engine silentblock for Peugeot 205 has an internal diameter of 10 mm. Outside diameter 70 mm. It is located on the lower right-hand corner of XU engines, front and rear.
For Peugeot 205:- 1.6 GT, XS 1580cm3 89hp (XU5M/Z) from 08/1992 to 07/1993- 1.6 Automatic 1580cm3 80hp (XU51C) from 08/1985 to 07/1987- 1.6 Automatic 1580cm3 80hp (XU51C) from 08/1987 to 07/1993- 1.6 Automatic catalyzed 1580cm3 89hp (XU5M/Z) from 08/1993 to 08/1994- 1.6 GTI 1580cm3 105hp (XU5J) from 03/1984 to 12/1986- 1.6 GTI 1580cm3 115hp (XU5JA) from 03/1986 to 12/1986- 1.6 GTI 1580cm3 115hp (XU5JA) from 01/1987 to 07/1992- 1.9 GTI 1905cm3 130hp (XU9JA) from 01/1987 to 07/1992- 1.9 GTI Catalyzed 1905cm3 122hp (XU9JA/Z) from 08/1992 to 12/1993- 1.9 Gentry 1905cm3 105hp (XU9J1/Z) from 08/1991 to 12/1993
Peugeot 205 Cabriolet: - 1.6 CTI 1580cm3 115hp (XU5JA) from 08/1985 to 07/1990- 1.9 CTI 1905cm3 130hp (XU9JA) from 08/1990 to 07/1991- 1.9 CTI Catalyzed 1905cm3 105hp (XU9J1/Z) from 08/1991 to 12/1993

Engine mount for Renault Dauphine

For Renault Dauphine:
- Renault Dauphine (R1090) from 03/1956 to 06/1962 - Billancourt 845cm3 26hp
- Renault Dauphine (R1090) from 07/1962 to 06/1963 - Billancourt 845cm3 32hp
- Renault Dauphine (R1094) from 07/1963 to 12/1966 - Billancourt 845cm3 32hp
- Renault Dauphine Gordini (R1091) from 07/1957 to 12/1960 - Ventoux 845cm3 33hp
- Renault Dauphine Gordini (R1091) from 09/1962 to 09/1963 - Ventoux 845cm3 33hp
- Renault Dauphine Gordini (R1095) from 07/1965 to 12/1967 - Ventoux 845cm3 36hp
- Renault Dauphine 1093 (R1093) from 11/1961 to 04/1963 - Ventoux 845cm3 49hp

Silentbloc engine with triangular baseplate
Original quality

Silentbloc support moteur droit pour VOLKSWAGEN Transporter T4 du 01/1996 au 06/2003 y compris version Syncro (4x4)
Moteurs 5 cylindres avec boite de vitesses manuelle :
- 2.4 Diesel 78cv (AAB), 75cv (AJA)
- 2.5 Essence 110cv (ACU, AEN), 115cv (AET, APL, AVT)
- 2.5 TDi 88cv (AJT, AYY)

avec boite de vitesses automatique :
- Tous modèles

This engine support tool on a rolling base means an engine can be easily moved and worked on at all angles with its pivoting type rotating system, the best!
Only for VW 4-cylinder flat-type engines Type 1 and Type 4.

For Golf 3:
- 1.9 TDi 90hp and 110hp (1Z, AFN)
- 2.0 GTi 16s 150hp (ABF) from 01/93->

For Golf 3:
- 1.9 TDi 90hp and 110hp (1Z, AFN)
- 2.0 GTi 16s 150hp (ABF) from 01/93->