Pushrods tubes

Tube envelope for Porsche 912 from 1966 to 1969 :
- 912 1.6 from 1966 to 1969
The envelope tube is sold individually and 8 quantities are required.

Stainless steel rocker armcasing tube for Type 4 petrol engines: 1700, 1800, 2000cc.The thickness of an envelope tube is not very thick and can be deformed over the years.However, the engine 's tightness also depends on the condition of the tubes. If they're crunched, dented or deformed, oil can leak out either from the block or from the cylinder heads, thinking that the gaskets might be at fault.Poor sealing can lead to leaks and serious engine damage if the engine oil level is too low.Don't hesitate to change the faulty tube(s).Need 8 per engine, sold individually.
Suitable for :- VW Combi Bay Window from 08/1971 to 07/1979- VW Transporter T25 / T3 from 05/1979 to 12/1982- VW Type 4, 411, 412 from 08/1969 to 07/1974

Set of 8 tubes with nuts and gaskets for VW Combi Split with engine type 1 from 08/1960 to 07/1967

Set of 8 tubes with nuts and gaskets for VW Combi Bay Window with type 1 engine from 08/1967 to 07/1979.

Set of 8 CSP rocker arm casing tubes Specific for large-diameter exhausts.Length: Original 209 mmfor Type 4 petrol engines: 1700, 1800, 2000cc.
For VOLKSWAGEN :- Bay Window Combi, 08/1971 ->07/1979- Transporter T25 / T3, 05/1979 ->12/1982- Type 4, 411, 412, 08/1969 ->07/1974- Porsche 914 -4, 01/1969 ->02/1976

Tube protecting timing rods
8 required, sold per unit.

For Transporter T25/T3, 05/1979 ->07/1992
Petrol engines:
- 1600cc (CT)
- 1900cc (DF, DG, SP)
- 2100cc (DJ, MV, SR, SS)

Envelope tube retaining clips are an essential part of air-cooled engine sealing.
This jacket tube retaining clip for Type 4 engines: 1700, 1800, 2000cc is suitable for :- Bay Window Combi from 08/1971 to 07/1979- Transporter T25 / T3 from 05/1979 to 12/1982- Type 4, 411, 412 from 08/1969 to 07/1974- Porsche 914 -4 from 01/1969 to 02/1976
Need 2 per engine, sold individually.

Clip retaining envelope tubes on engine for:
- 914-4 1.7 to 2.0

Quantity needed per vehicle: 2

Tube protecting timing rods
Top quality CSPtelescopic model Comes with the seals.
Allows replacement without dismantling the engine.
8 required per engine, sold per unit.

For Transporter T25/T3, 05/1979 ->07/1992
Petrol engines:
- 1600cc (CT)
- 1900cc (DF, DG, SP,GW)
- 2100cc (DJ, MV, SR, SS)

As "moulded foot" motors are becoming more and more popular, Mecatechnic offers you this set of 8 CSP telescopic tubes for type 1 "moulded foot" motors from 25

As "moulded foot" motors are becoming more and more popular, Mecatechnic offers you this set of 8 CSP telescopic tubes for type 1 "moulded foot" motors from 25

As "cast foot" motors are becoming more and more popular, Mecatechnic offers a 25" telescopic CSP tube for type 1 "cast foot" motors.

Fitting tools for CSP casing tubes for 25/30 hp engines.
Hold the two halves of the sheathing tube with the small aluminium mounting tool and insert the tube into the housing. Then guide the mounting plug through the cylinder head, place it on the tube, compress the two halves, remove the aluminium tool and carefully release the mounting plug until the tube fits properly into the cylinder head.
Comes without jacket tubes.

Tube to protect the distributor rods
Telescopic model.
8 required per engine, sold by unit.
Original Volkswagen Classic Parts.

For Transporter T25 / T3, 05/1979 ->07/1992
Petrol engines:
- 1600cc (CT)
- 1900cc (DF, DG, SP)
- 2100cc (DJ, MV, SR, SS)

Stainless steel tubing for Porsche 912 from 1966 to 1969 :
- 912 1.6 from 1966 to 1969
The envelope tube is sold individually and 8 quantities are required.

Stainless steel tubing for Porsche 356 B and C from 1960 to 1965:
- 356 B T5 1600 - 60 hp (616/1) from 1960 to 1961- 356 B T5 1600 S - 75 hp (616/2) from 1960 to 1961- 356 B T5 1600 Super 90 - 90 hp (616/7) from 1960 to 1961- 356 B T6 1600 - 60 hp (616/1) from 1962 to 1963- 356 B T6 1600 S - 75 hp (616/12) from 1962 to 1963- 356 B T6 1600 Super 90 - 90 hp (616/7) from 1962 to 1963
- 356 C 1600 - 75 hp (616/15) from 1964 to 1965- 356 SC 1600 - 95 hp (616/16) from 1964 to 1965
The envelope tube is sold individually , and 8 quantities are required.

Set of 8 CSP push rod envelope tubes
Specific for large diameter exhausts.
Longer models for 214.5 mm/220 mm rods
for long block prepared Type 4 engines.

For:
- Kombi Bay Window, 08/1971 ->07/1979
- Transporter T25/T3, 05/1979 ->12/1982
- Type 4, 411, 412, 08/1969 ->07/1974
- Porsche 914 -4, 01/1969 ->02/1976

Rocker armcasing tube for Type 4 petrol engines: 1700, 1800, 2000cc.The thickness of an envelope tube is not very thick and can be deformed over the years.However, the engine 's tightness also depends on the condition of the tubes. If they're crunched, dented or deformed, oil can leak out either from the block or from the cylinder heads, thinking that the gaskets might be at fault.Poor sealing can lead to leaks and serious engine damage if the engine oil level is too low.Don't hesitate to change the faulty tube(s).Need 8 per engine, sold individually.
Suitable for :- VW Combi Bay Window from 08/1971 to 07/1979- VW Transporter T25 / T3 from 05/1979 to 12/1982- VW Type 4, 411, 412 from 08/1969 to 07/1974

Rocker shaft casing tube for 914-4 from 01/1969 ->02/1976 :
- 1.7 to 2.0 from chassis no. W0057461->

Length: 208 mm
Cylinder head diameter: 31 mm
Block-side diameter: 27 mm