Camshaft

Suitable for :
- Golf 2 16S
- Golf 3 16s
- Corrado & Passat 16S

For Golf 3:
- 1.9 Diesel 64hp (1Y, AEY)
- 1.9 Turbo Diesel 75hp (AAZ)

For Passat 3:
- 1.9 Diesel 64hp (1Y)
- 1.9 Turbo Diesel 75hp (AAZ)

Round camshaft nut retainer for Citroën Traction (from October 1935).
Round retainer designed to secure the camshaft pinion lock nut.
Prevents loosening due to vibration and mechanical stress.
Compatible with all Citroën Traction 7 HP, 11 HP and 15 HP (15/6 ) models since 10/1935.

Suitable for all BMWs with M20 engines:
- E12
- E21
- E28
- E30
- E34

Set of 3 VD20020 or VD20022 camshaft pulley mounting screws

For Type 1 25hp / 30hp (36SAE) engine
Original, OKRASA

Camshaft retaining washer for Porsche 911 type G from 1982 to 1989 :

- 911 SC 3.0 from 1982 to 1983
- 911 Carrera 3.2 from 1984 to 1989
- 911 Turbo 3.3 from 1982 to 1989

The washer is sold individually , and two quantities are required per vehicle.

Chain that connects the exhaust and intake camshafts via sprockets,

For Ibiza (6K):
- 2.0 16s (ADL, ABF)

For the following engines:
- 1.8 16S (KR)
- 2.0 16S (9A)

Camshaft sensor gasket for:

- Mazda MX5 NA 1.6L and 1.8L

- Original MAZDA part

Intake camshaft for Volkswagen Golf 3
For VW Golf 3:- 2.0 GTI 16S 150hp (ABF)
Synchronized with the rest of the engine by the timing belt, the camshaft controls the opening and closing of the intake valves. It ensures good combustion in the cylinders. Worn cams can alter the intake cycle and cause engine misfiring.
Original Volkswagen part

Suitable for all BMW models with M20 engine :
- E12
- E21
- E28
- E30
- E34

For Golf 2 :
- 1.8L 16S 129hp (PL)
- 1.8L 16S 139hp (KR)

For Corrado :
- 1.8L &2.0L 16S (KR, 9A)

For Scirocco :
- 1.8L 16S 139hp

For Passat 3 :
- 1.8L 16s 136hp (KR)
- 2.0L 16s 136hp (9A)

Consists of small inner spring and large outer spring
16 quantities needed for one engine

Variable camshaft solenoid for Porsche Boxster type 986 from 2003 to 2004 :
- 986 2.7 Boxster - 228 hp (M96.23) from 2003 to 2004- 986 3.2 Boxster S - 260 hp (M96.24) from 2003 to 2004- 986 3.2 Boxster S550 - 266 hp (M96.24) from 2003 to 2004
The solenoid is sold individually , and two quantities are required per vehicle.

Anti-oil vapour plate
This plate limits oil rising from the dynamo foot.

For VW Beetle, Karmann-Ghia with Pied-moulés 25 / 30hp engine

Camshaft retaining washer for Porsche 911 type 964 from 1989 to 1994 :

- 964 3.6 - 250hp (M64.01/02) Carrera 2 from 1990 to 1994
- 964 3.6 - 250hp (M64.01) Carrera 4 from 1989 to 1994
- 964 3.6 - 260hp (M64.03) Carrera RS from 1992
- 964 3.6 - 250hp (M64.03) Carrera RS America from 1992
- 964 3.3 - 320hp (M30.69) Turbo from 1991 to 1992
- 965 3.6 - 360hp (M64.50) Turbo from 1993 to 1994

The washer is sold individually , and two quantities are required per vehicle.

Engle W-120 performance camshaft: 294°.
Gap between intake and exhaust cams: 108°.
Cam lift: 10.08 mm / Valve lift: 11.09 mm (1.1/1)
Power and torque up to 7000 rpm
Ideal for large-displacement road/track engines
Order VD20004 pulley additionally.
Fitted with oil pump for 3-pin pulley.

For Beetle, Karmann, Combi, Buggy, 181, Type 3 ...
Type 1 engines: 1600, 1641, 1776, 1835, 1915cc
with original 1.1/1 or 1.25/1 rocker arms

Unstable idle on medium displacement, large valves and reinforced springs recommended for fitting this AAC.

Key located between the pulley and the camshaft

For Golf 3:
- 1.9 64hp (1Y)
- 1.9 TD 75hp (AAZ)
- 1.9 TDi 90hp (1Z)
- 2.0 16s (ABF)

Original camshaft for Volkswagen Golf 1
For VW Golf 1 :- 1.6 110hp (EG)- 1.8 112hp (DX, JJ)
For VW Golf 1 Cabriolet up to chassis 15-F-035 000 :- 1.6 110hp (EG)- 1.8 112hp (DX, KT, JJ)
For VW Scirocco up to chassis ->53-F-060 000 :- 1.6 110hp (EG)- 1.8 112hp (DX, JJ, KT)
Synchronized with the rest of the engine by the timing belt, the camshaft controls the opening and closing of the intake and exhaust valves. It ensures proper combustion in the cylinders. Worn cams can alter the intake and exhaust cycle, leading to engine misfiring.
Bare camshaft, without pulley or bearingsOriginal Volkswagen part

Suitable for all BMW 6-cylinder M20 :
- E12
- E21
- E28
- E30
- E34

Original camshaft for Volkswagen Golf 2
For VW Golf 2- 1.8 112hp (EV, GZ) up to 07/85
Synchronized with the rest of the engine by the timing belt, the camshaft controls the opening and closing of the intake and exhaust valves. It ensures proper combustion in the cylinders. Worn cams can alter the intake and exhaust cycle, leading to engine misfiring.
Bare camshaft, without pulley or bearingsOriginal Volkswagen part