Rockers

Rocker arm rod for Type 1 engine: 25 bhp & 30 bhp
8 required perengine, sold per unit.

For Beetle, Karmann-Ghia & Combi, 12/1947 ->07/1965
25 bhp/30 bhp engines no. 100 788 ->4 050 000.

Set of 8 high-performance EMPI reinforced rocker rods
thickness 1.45mm
L = 281 mm / 11.078"
Bending and temperature resistance at high rpm with high-lift AACs and reinforced springs.
Suitable for double valve springs

Replacement adjustment hammer head screw on special rocker arm for offset ramp of ratio 1.25 (VD25725) or ratio 1.4 (VD25740).

For Golf 5:
- 2.0 TDi 136hp (AZV)
- 2.0 TDi 140hp (BKD)
- 2.0 TDi 170hp (BMN)

For A3 (8P) :
- 2.0 TDi 136 hp (AZV)
- 2.0 TDi 140 hp (BKD)
- 2.0 TDi 163 hp (BUY)
- 2.0 TDi 170 hp (BMN)

For A3 (8P) :
- 2.0 TDi 136 hp (AZV)
- 2.0 TDi 140 hp (BKD)
- 2.0 TDi 163 hp (BUY)
- 2.0 TDi 170 hp (BMN)

Roller rocker arm,

For Golf 5 Saloon:
- 3.2 250hp (BUB)

For A6 (C5) and Allroad:
- 2.5 TDi 150cv (AFB, AKN)
- 2.5 TDi 155cv (AYM)
- 2.5 TDi 163cv (BFC)
- 2.5 TDi 180cv (AKE)

For Golf 5:
- 1.4 75hp and 80hp (BCA, BUD)
- 1.4 90hp (BKG)
- 1.6 115hp (BAG) up to chassis ->1K-4-200000

For Polo 6N1:
- 1.6 120hp (AJV)

For Polo 6N2:
- 1.4 100hp (AFK, AQQ, AUB)
- 1.4 75hp (AHW, APE, AUA)
- 1.6 125hp (ARC, AVY)

For Polo 9N1:
- 1.2 64hp (AZQ, BME)
- 1.4 75hp and 85hp (AUA, BBY, BKY, AXU)
- 1.4 100hp (AUB, BBZ)

For Polo 9N3:
- 1.2 64hp and 70hp (BME, BZG)
- 1.4 75hp, 80hp and 85hp (BKY, BUD, AXU)
- 1.4 100hp (BBZ)

Lug for hydraulic tappet

For A4 (B6) Saloon and Avant:
- 2.5 TDi 163hp (BZC, BDG)
- 2.5 TDi 180 hp (BAU, BDH)

ForA6 (C5) :
- 2.5 TDi 163cv (BCZ, BDG)
- 2.5 TDi 180cv (BAU, BDH)

For A3 (8P):
- 1.6 FSi 115 hp (BAG, BLF, BLP)

For Passat 4 and 5 (3B2, 3B5, 3B3, 3B6):
- 2.5 TDi 150hp (AFB, AKN)

Original VW rocker rod.
Length: 271.5mm
For type1 engine : 1200
8 required per engine, sold by unit.
Original VolkswagenClassic Parts.

For Beetle, Karmann-Ghia, Combi, 08/1960->
1200cc34hp engine

O-ring on rocker stud under rocker shaft mounting block in cylinder head.
Sold individually, 2 required per cylinder head.
Original Volkswagen Classic Part

For all VW type 1 engines 1200 to 1600cc
For VW Beetle, Karmann-Ghia, Type 3, Kübel 181, Combi Split and Bay Window

FEBI valve rocker arm for Bmw E9: - Compatible with all Bmw E9 versions from 12/1968 to 11/1975 including E9 3.0 csl engine code m30. Need 12 rocker arms. Sold individually.

O-ring on rocker stud under rocker shaft mounting block in cylinder head.Sold individually, 2 required per cylinder head.
For all VW type 1 engines from 1200 to 1600ccFits Brazilian VW Combi Split from 1957 to 1975.

Rocker set ring
for VW engine distributor
Air-cooled flat 4-cylinder:
1700, 1800, 2000cc (Type 4 / CU, CV)
Dimensions: 20 x 20,7 x 1mm
8 required per engine, Sold by unit.
Original Volkswagen Classic Parts.

For VW:
- Combi Bay Window, T2b
Years: 08/1971 ->07/1979
- Transporter T25 / T3, Bus, Van,
Caravelle, Syncro, Joker, California
Years: 05/1979 ->12/1982

Inlet valve rocker
for VW engine distributor
Air-cooled flat 4-cylinder:
1700, 1800, 2000cc (Type 4)
Designed for 10mmdiameter hammers
4 required per engine, sold by unit.
Original Volkswagen Classic Parts.

For VW:
- Combi Bay Window, T2b
Years: 08/1971 ->07/1979
- Transporter T25 / T3, Bus, Van,
Caravelle, Syncro, Joker, California
Years: 05/1979 ->12/1982